List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. "Wide-Area and Local-Area Water Characterization in Underlying Soil Using Cost-Effective, Directional Detectors and Novel Moderation Designs"

    SBC: Silverside Detectors Inc.            Topic: 84

    The Cosmic-ray Neutron Sensing (CRNS) method can measure the water content of soil with 2% accuracy (under optimal conditions) for agriculture-sized (ie., hectometers) scale. The method uses a neutron detector situated above ground in the center of the measurement area, monitoring in real-time the emission of cosmic-ray produced neutrons from the soil. The simple, non-invasive measurement can prov ...

    SBIR Phase I 2018 Department of Agriculture
  2. 12-bit 32 Channel 500MSps Low Latency ADC

    SBC: Pacific Microchip Corporation            Topic: 25g

    Particle accelerators need precise, real-time control of the particle beams used to create the conditions required for Nuclear Physics (NP) experiments. The digital feedback of these control systems requires low latency ADCs with high linearity and dynamic range. High performance multichannel digitizers dissipate excessive heat. Therefore, low power dissipation is another critical requirement for ...

    SBIR Phase II 2018 Department of Energy
  3. 3100F T-EBC Stable Coatings for SiC CMCs

    SBC: TECHNOLOGY ASSESSMENT AND TRANSFER, INC.            Topic: 18a

    Developing a T-EBC coating capable of providing extended performance of sic CMCs in high temperature, water vapor gas turbine engine environments at 3100oF coupled with the need to resist degradation from external sand/ salt ingestion is a daunting challenge. Of all the numerous studies by NASA, universities, private sector companies and other Federal laboratories, rare earth zirconia and hafnia c ...

    SBIR Phase I 2018 Department of Energy
  4. 360 degree field of view information in a 120 degree immersive virtual reality (VR) display

    SBC: SA Photonics, Inc.            Topic: A17135

    Army aviators are flying helicopters in highly dynamic and dangerous scenarios. In urban warfare, this can mean avoiding obstacles and external threats. On platforms like the US Army CH-47 Chinook, the pilot has guidance from a flight engineer or crew chief who can look down through a hatch in the floor. Other Army helicopters do not have that luxury. Regardless, there are numerous blind spots rem ...

    SBIR Phase I 2018 Department of DefenseArmy
  5. 3D Image from Sensor Fusion

    SBC: Arete Associates            Topic: N171062

    Aret Associates proposes to develop and deliver EnhancerPro 3-D, a near real-time, modular software tool based on Arets existing EnhancerPro tool and providing 3-D video and sonar model generation using Structure from Motion (SfM) algorithm toolchain.

    SBIR Phase II 2018 Department of DefenseNavy
  6. 3D Imaging Flow Cytometer

    SBC: NanoCellect Biomedical, Inc.            Topic: NIDA

    D Imaging Flow Cytometer NanoCellect BiomedicalIncRESEARCH andampRELATED Other Project InformationPROJECT SUMMARY Fluorescence activated cell sortingFACSor flow cytometry enables clinicians and researchers to quantitatively characterize the physicalcell sizeshapegranularityand biochemicalDNA contentcell cycle distributioncell surface markersand viabilityproperties of cellshowever FACS devices do n ...

    SBIR Phase I 2018 Department of Health and Human Services
  7. 3D Manufacturing of Integrated Heat Exchangers

    SBC: POLARONYX, INC.            Topic: S3

    This NASA SBIR Phase II proposal presents an unprecedented method to do additive manufacturing of high temperature materials for NTP with a femtosecond (fs) fiber laser. A proof of concept demonstration has been carried out at the end of Phase 1. It is the enabling technology for 3D manufacturing of high temperature materials. With our successful history in ultrafast laser AM and SM processing, th ...

    SBIR Phase II 2018 National Aeronautics and Space Administration
  8. 3D Modeling Indoor Space

    SBC: TOYON RESEARCH CORPORATION            Topic: SOCOM173002

    The US Special Operations Forces (SOF) missions include a variety of short-duration, covert operations (e.g. enemy capture, personnel recovery, intelligence/information gathering) which require extensive operational planning and rehearsal. To assist in planning, accurate 3D physical models of sensitive indoor areas or enemy-occupied buildings is desired; however, obtaining data to build such model ...

    SBIR Phase I 2018 Department of DefenseSpecial Operations Command
  9. 3D Printed Component Packages for Semiconductor Die

    SBC: Edwards, Carl            Topic: MDA17011

    3D printing has existed for decades within certain manufacturing industries where many legal regimes, including patents, industrial design rights, copyright, and trademark may apply. However, 3D printing of electronic packages and components is more recent area of development. Paraphrasing the topic, this work willdevelop a 3D printing process concept that additively prints a 3D package around a b ...

    SBIR Phase I 2018 Department of DefenseMissile Defense Agency
  10. 3D Printed Magnetic Shield

    SBC: TECHNOLOGY ASSESSMENT AND TRANSFER, INC.            Topic: N172130

    Technology Assessment & Transfer, Inc. (TA&T) and their collaborators propose a 3D printed, multilayer magnetic shielding disk to protect sensitive electronics in electromagnetic railgun hypervelocity projectiles. Topology optimization coupled with multiphysics finite element analysis modeling will be employed to optimize the thickness, arrangement, and internal geometry of various metallic and ce ...

    SBIR Phase I 2018 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government