List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Automated Fiber Placement of Thin-Ply Composite Materials for Large Aerospace Structures

    SBC: NextGen Materials & Processing LLC            Topic: T12

    Leveraging their prior experience working with automated fiber placement (AFP) of thin-ply composite materials, NextGen Materials & Processing LLC and the University of Massachusetts Lowell will utilize a Design of Experiments approach, combined with analytical modeling, to identify the critical material, slitting, spooling, and AFP parameters that influence the repeatable, high quality laydow ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  2. Bifunctional Regenerative Electrochemical Air Transformation for Human Environments

    SBC: Skyre, Inc.            Topic: T6

    The proposed  Bifunctional Regenerative Electrochemical Air Transformation for Human Environments (BREATHE) for life support and habitation is part of the atmosphere revitalization equipment necessary to provide and maintain a livable environment within the pressurized cabin of crewed spacecraft. Sustainable Innovations (SI) has developed a novel solid state technology for gas compression bas ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  3. Regeneratively Cooled Ceramic Matrix Composite Nozzle Assembly for Reduced Weight

    SBC: Physical Sciences Inc.            Topic: T9

    All rocket missions benefit from having lower structural mass and higher specific impulse, both of which contribute to larger payload fractions and therefore lower mission cost. High temperature materials such as ceramic matrix composites (CMCs) are an avenue to lower engine mass because of the low density and high specific strength of the material. They also have a high maximum temperature and so ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  4. Project Patchwork- Wirelessly Networked Structural Analysis Devices for Aircraft

    SBC: Mide Technology Corporation            Topic: A2

    Through this SBIR effort, NASA is looking for innovative technology to bolster its flight research capabilities.  Particularly, NASA seeks the development of innovative measurement and data acquisition approaches.  Mide through a past RIF BAA for Navair, developed a stand-alone high performance data logger for vibration/acceleration, pressure, and temperature. The device, dubbed the Slam ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  5. Bi2212 Superconductors for High-Power Density Motors for Aero Propulsion

    SBC: Solid Material Solutions, LLC            Topic: A1

    Future hybrid aircraft, such as NASA’s N3-X plan, will require all-superconducting electric motors and generators in order to achieve power density in excess of 10 kW/kg.   Unlike the DC rotor, the stator must operate in AC mode, for example, from 0-0.5 T at 120 Hz, making it impossible to use high temperature superconducting (HTS) tapes due to their high losses in transient fields, req ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  6. Electrochromic Laminates For Advanced Spacesuit Visors

    SBC: Giner, Inc.            Topic: H4

    NASA's Extravehicular Mobility Unit, or EMU, is a personal mini-spacecraft that comprises the space suit assembly and life support systems. The current EMU has a manually operated extravehicular visor assembly (EVVA) that provides protection from micrometeoroids and from solar ultraviolet and infrared radiation. For the integration of EVVA with NASA’s next generation space suits helmet b ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  7. Dehydration Resistant And Dimensionally Stable High Performance Membrane

    SBC: Giner, Inc.            Topic: H1

    In several technologies within NASA’s In Situ Resource Utilization (ISRU) systems, such as fuel cell, water electrolysis and gas/water separations etc., polymeric membranes, especially proton exchange membranes (PEM), play an important role. These membranes are generally hygroscopic, subject to swelling in the presence of humidity or water. When restrained membranes undergo a hydration/dehyd ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  8. Data Logger for Measuring Body Dynamics in Spaceflight Environment (MBISE)

    SBC: Mide Technology Corporation            Topic: H12

    During dynamic events such as launch, ascent abort, atmospheric reentry, descent, and landing, crewmembers will experience significant inertial and vibrational loading.  To this date, data has not been collected in flight.  There is particular interest in the chest, neck, and head region, which are exceptionally sensitive areas.  Quantifying the loading on the crewmembers will allow ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  9. Capacitive Deionization (CDI) for Efficient Desalination of Water in Space

    SBC: VURONYX TECHNOLOGIES LLC            Topic: H3

    In this Phase 1 SBIR proposal, Vuronyx Technologies will design an energy efficient, low footprint water recovery system for space applications. The proposed system will integrate two emerging water purification approaches - a capacitive deionization (CDI) system to remove ions, and an Electrochemical Advanced Oxidation Process (EAOP) to remove organic contaminants and microbes. The proposed work ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  10. Compact High Efficiency GaN-based PPU

    SBC: Busek Co., Inc.            Topic: S3

    Busek proposes to develop a low-cost, lightweight Hall Effect Thruster (HET) Power Processing Unit (PPU) at targeted 1kW/kg power density with more than 97% efficiency. The proposed PPU solution adopts advanced GaN power MOSFETs and PCB based planar magnetics technology to enable high switching frequency operation. Reduced headcount of magnetics, semiconductors and associated driver integrated cir ...

    SBIR Phase I 2018 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government