You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Cannula System for "Bridge to Recovery" Cardiac Assist

    SBC: ABIOMED, INC.            Topic: N/A

    DESCRIPTION (provided by applicant): Cardiac failure is the, largest single cause of mortality in the United States today. With an increase in the use of long-term cardiac assist devices, there is also a need for the short-term "bridge to recovery" application. This application is intended to provide a low-cost temporary support for patients whose heart is capable of recovering. This "patient scr ...

    SBIR Phase I 2005 Department of Health and Human ServicesNational Institutes of Health
  2. Heated Thermoplastic Fiber Placement Head for NASA Langley Research Center

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: A404

    Reduced-mass polymer composite materials are crucial to the success of aerospace systems for reducing vehicle weight. But, composite material adoption is inhibited because the autoclave consolidation required is prohibitively expensive for the large tanks and skins contemplated in the Next Generation Launch Technology (NGLT) Program. To remedy this, NASA-LaRC has been developing cost-effective, ...

    SBIR Phase II 2005 National Aeronautics and Space Administration
  3. Optimal Composite Materials using NASA Resins or POSS Nanoparticle Modifications for Low Cost Fabrication of Large Composite Aerospace Structures

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: X602

    Reduced mass composite materials are crucial to the success of aerospace systems, but their adoption is inhibited because they require autoclave consolidation, a process that is prohibitively expensive for large aerospace structure. To remedy this, NASA-LaRC has been developing cost-effective high-performance thermoplastic composite processing equipment that enables out-of-autoclave tape placemen ...

    SBIR Phase I 2005 National Aeronautics and Space Administration
  4. SBIR Phase II: Advanced Phased Array Ultrasound Instrument for Nondestructive Evaluation (NDE)

    SBC: ACOUSTIC IDEAS, INC.            Topic: N/A

    This SBIR Phase II research project strives to develop an Advanced Ultrasonic Beamformer that is unparalleled in its scalability and signal processing features. The ultrasonic beamformer architecture will be unique in its breadth of features. The architecture was developed as the superset of features across several fields including medical imaging, medical therapy, bone density measurement, vascul ...

    SBIR Phase II 2005 National Science Foundation
  5. Wave Energy Harvesting to Power Unmanned Surface Vehicles

    SBC: Advanced Mechanical Technology, Inc.            Topic: N05T021

    Recent world events have highlighted the need for timely and accurate intelligence data to assess threats and combat terror. An unmanned surface vehicle (USV ) can potentially perform intelligence, surveillance and reconnaissance (ISR) missions, provide force protection, hunt for mines in coastal waters or harbors, and provide port security. USVs under development by the Navy are powered by the ...

    STTR Phase I 2005 Department of DefenseNavy
  6. Field-Expedient Combat Load Assessment Device (CLAD)

    SBC: Advanced Mechanical Technology, Inc.            Topic: A05176

    Field combat load assessment for combat training and combat mission personnel load management is an identified military need. The combat load assessment device or CLAD must meet several requirements not found in off-the-shelf commercial or consumer weighing devices. Weight requirements, accuracy requirements, functional requirements, and cost requirements prohibit the use of currently OTS hardwa ...

    SBIR Phase I 2005 Department of DefenseArmy
  7. SBIR Phase I: Low Cost Pressure Infiltration Casting Process to Support High Volume Manufacture of Graphite-Metal Thermal Management Components

    SBC: ADVANCED THERMAL TECHNOLOGIES            Topic: MI

    This Small Business Innovation Research (SBIR) Phase I project will develop a manufacturing technology to support the pressure infiltration casting process to produce large billets of a graphite-metal material. The improved process will yield to substantial finished part cost saving. There is a critical need for advanced materials with improved thermal properties capable of meeting the thermal man ...

    SBIR Phase I 2005 National Science Foundation
  8. An Accurate, Efficient Atmospheric Radiative Transfer Algorithm for TAWS

    SBC: ATMOSPHERIC & ENVIRONMENTAL RESEARCH, INC.            Topic: A05053

    A core process for sensor performance prediction is the radiative transport algorithm used to convert the scene environmental characteristics into radiance. Numeric approximations are often used to enhance execution time at the expense of overall radiometric accuracy. However, many radiative transfer approximations have limited applicability, working only for a set of atmospheric conditions, sen ...

    SBIR Phase I 2005 Department of DefenseArmy
  9. Simulation of Stressing Optical Clutter for Scene Generation

    SBC: ATMOSPHERIC & ENVIRONMENTAL RESEARCH, INC.            Topic: MDA04154

    This effort will characterize the spatial structure and real world features of stressing atmospheric phenomena and develop techniques to efficiently represent these phenomena in optical/infrared background models. Our approach to this problem involves locating and identifying stressing backgrounds contained in measurements and extracting key clutter characteristics in a form that allows t ...

    SBIR Phase I 2005 Department of DefenseMissile Defense Agency
  10. Characterization of mesoscale weather prediction errors for dispersion modeling

    SBC: ATMOSPHERIC & ENVIRONMENTAL RESEARCH, INC.            Topic: DTRA04003

    DTRA uses high-resolution mesoscale forecasts to drive HPAC, the DTRA dispersion modeling tool that generates critical forecasts of dosage resulting from releases of chemical, biological, or radiological agents. HPAC is designed to provide probablistic information based on estimates of the uncertainty of the input forecast fields of the meteorological variables (wind, temperature, etc.). ...

    SBIR Phase I 2005 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government