For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. HYMONT, a Hybrid system framework for detecting, classifying, and mitigating Malicious Outbound Network Traffic flows

    SBC: MILCORD LLC            Topic: OSD08T001

    In Phase I, Milcord LLC and Dartmouth College jointly researched and developed a software prototype that applies machine learning algorithms on contextual metadata, and entropy based sensors for the purpose of detecting data exfiltration on a computer network in real-time while accurately distinguishing between legitimate and anomalous behavior. In particular, we built empirical belief indicators ...

    STTR Phase II 2009 Department of DefenseArmy
  2. Wireless Brake and Tire Monitoring System (WBTMS)

    SBC: Templeman Automation, LLC            Topic: AF073144

    The Wireless Tire and Brake Monitoring System (WTBMS) is designed to take real time measurements of key tire and brake parameters during and immediately post landing and relay them to ground operators. This data will provide insight into the conditions experienced by Air Force equipment during landing, but more importantly will provide a quick and accurate way of making "go/no go" decisions on app ...

    SBIR Phase II 2009 Department of DefenseAir Force
  3. GhostSwimmer: Tactically Relevant, Biomimetically Inspired, Silent, Highly Efficient and Maneuverable Autonomous Fish Robot

    SBC: Boston Engineering Corporation            Topic: N08T030

    The proposed Phase II GhostSwimmer program is intended to not only create an advanced and improved vehicle, but to prove that biomimetic technology, specifically GhostSwimmer, is a viable and often optimal option for Navy missions. The major goals of Phase II are: prove and characterize platform maneuverability, efficiency, and stealth; develop manufacturability and affordability; define the role ...

    STTR Phase II 2009 Department of DefenseNavy
  4. A Novel High Resolution Photon Counting Detector for X-Ray Inspections

    SBC: Radiation Monitoring Devices, Inc.            Topic: A08051

    Current state-of-the-art X-ray imaging detectors use energy integration, where the simple integration of X-ray events during the exposure period forms images. Unfortunately, such indiscriminate operation is sub-optimal for digital radiography or CT imaging because of its inability to reject scatter, thus reducing contrast in reconstructed images, and the limited resolution of the detectors, which ...

    SBIR Phase II 2009 Department of DefenseArmy
  5. In-Space Distributed Fiber Optic Hydrogen Leak Sensor

    SBC: Broadband Photonics Incorporated            Topic: X902

    Broadband Photonics Inc. proposes development of a patent-pending distributed fiber optic sensor for in-space hydrogen leak detection. Reliable and fast detection of hydrogen leaks is critical to both operational safety and maintenance of propellant quantities for in-space hydrogen systems. Characteristics of the plume formed by a hydrogen leak are unpredictable in low gravity due to lack of buoya ...

    SBIR Phase II 2009 National Aeronautics and Space Administration
  6. An Integrated Physical Therapy/ Rehabilitation Robotic System for Military Healthcare Enhancement

    SBC: Hstar Technologies            Topic: A08120

    Hstar proposes an integrated reconfigurable non-treadmill rehabilitation robot (RehaBot) system using SEA (series elastic actuators) that a) allows multiple reconfigurable and progressive rehabilitation training procedures for upper and lower limbs, b) provides telepresence rehabilitation training consultation and remote supervision, c) creates gait retraining scenarios for ambulatory training in ...

    SBIR Phase II 2009 Department of DefenseArmy
  7. Affordable Electro-Magnetic Interference (EMI) Grid Application

    SBC: Nano Terra, Inc.            Topic: A06031

    In this document, Nano Terra (and its partner, Surmet) describes its approach to build on its success in Phase I, in which our researchers proved that Soft Lithography can be used to cost-effectively decorate the inside of a dome with a fine gold grid. We estimate that our final process will cost at least five-fold less per dome to use and require an order of magnitude less funding for capital equ ...

    SBIR Phase II 2009 Department of DefenseArmy
  8. Computational Model and Measurement Tool for Evaluating the Design of Flight Deck Technologies

    SBC: APTIMA, INC.            Topic: A112

    The runway safety issue has been on the Most Wanted list of the National Transportation Safety Board since the list's inception in 1990. The FAA has responded by implementing two ground surveillance technologies at major U.S. airports to reduce the risk of runway incursions. However, both technologies route information through air traffic control (rather than directly to pilots), which significant ...

    SBIR Phase II 2009 National Aeronautics and Space Administration
  9. Open System of Agile Ground Stations

    SBC: Espace Inc            Topic: S409

    The Phase I effort demonstrated, through actual development and tests with a spacecraft system, the technical and programmatic feasibility of developing, within the SBIR phase II program, the prototype of an innovative and low-cost Open System of Agile Ground Stations using the new commercial Software Defined Radio (SDR) technology. The prototype agile stations will operate in a wide band used by ...

    SBIR Phase II 2009 National Aeronautics and Space Administration
  10. Assessment of Cooling Techniques for 2-D & 3-D Ceramic Matrix Composite (CMC) Turbine Engine Comps.

    SBC: Triton Systems, Inc.            Topic: A07012

    Triton proposes teaming with an aircraft engine original equipment manufacturer (OEM) to assess the performance of laser drilled film cooling holes in both three-dimensional (3-D) randomly dispersed fiber CMC material and two-dimensional (2-D) layered woven fiber CMC material for fabrication of hot section turbine engine components. 2-D and 3-D cooled (drilled) and uncooled (undrilled) coupons re ...

    SBIR Phase II 2009 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government