List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Cannula System for "Bridge to Recovery" Cardiac Assist

    SBC: ABIOMED, INC.            Topic: N/A

    DESCRIPTION (provided by applicant): Cardiac failure is the, largest single cause of mortality in the United States today. With an increase in the use of long-term cardiac assist devices, there is also a need for the short-term "bridge to recovery" application. This application is intended to provide a low-cost temporary support for patients whose heart is capable of recovering. This "patient scr ...

    SBIR Phase I 2005 Department of Health and Human Services
  2. Digoxin Chiral Isolates as Improved Pharmaceuticals

    SBC: ACADEMIC PHARMACEUTICALS INC            Topic: N/A

    DESCRIPTION (provided by applicant): Digoxin is the first line pharmacologic therapy for CHF and AF. Digoxin increases cardiac contractility and blocks conduction through the AV node slowing the ventricular response to AF and thus slowing the rate of the beating ventricles permitting more time for the heart to fill. The recent Dig trial supports the use of digoxin in the treatment of CHF and the r ...

    SBIR Phase I 2005 Department of Health and Human Services
  3. Heated Thermoplastic Fiber Placement Head for NASA Langley Research Center

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: A404

    Reduced-mass polymer composite materials are crucial to the success of aerospace systems for reducing vehicle weight. But, composite material adoption is inhibited because the autoclave consolidation required is prohibitively expensive for the large tanks and skins contemplated in the Next Generation Launch Technology (NGLT) Program. To remedy this, NASA-LaRC has been developing cost-effective, ...

    SBIR Phase II 2005 National Aeronautics and Space Administration
  4. Optimal Composite Materials using NASA Resins or POSS Nanoparticle Modifications for Low Cost Fabrication of Large Composite Aerospace Structures

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: X602

    Reduced mass composite materials are crucial to the success of aerospace systems, but their adoption is inhibited because they require autoclave consolidation, a process that is prohibitively expensive for large aerospace structure. To remedy this, NASA-LaRC has been developing cost-effective high-performance thermoplastic composite processing equipment that enables out-of-autoclave tape placemen ...

    SBIR Phase I 2005 National Aeronautics and Space Administration
  5. SBIR Phase II: Advanced Phased Array Ultrasound Instrument for Nondestructive Evaluation (NDE)

    SBC: ACOUSTIC IDEAS, INC.            Topic: N/A

    This SBIR Phase II research project strives to develop an Advanced Ultrasonic Beamformer that is unparalleled in its scalability and signal processing features. The ultrasonic beamformer architecture will be unique in its breadth of features. The architecture was developed as the superset of features across several fields including medical imaging, medical therapy, bone density measurement, vascul ...

    SBIR Phase II 2005 National Science Foundation
  6. Nanoadsorbent and Microwave Technology to Capture and Recover Organic Vapors

    SBC: ADS Technoogies, Inc.            Topic: N/A

    Emissions of volatile organic compounds (VOCs) and hazardous air polutants (HAPS are a serioud environmental issue. These pollutants are requlated to protect human health and encourage the development of better control technologies. Current technologies to control thses emissions, until better materials are developed, include destructive and/or recovery-based technologies. Implementation of ads ...

    SBIR Phase I 2005 Environmental Protection Agency
  7. SBIR Phase II:Ultrananocrystalline Diamond as Wear Resistant and Protective Coating for Mechanical Shaft Seal Applications

    SBC: Advanced Diamond TechNologies, Inc.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will develop a new class of mechanical shaft seals based on the benefits of a novel material called Ultrananocrystalline (tm) diamond (UNCDtm) that will result in seals that last longer, save energy and reduce environmental emissions associated with industrial pumping and turbo-machinery applications. Mechanical shaft seals are used i ...

    SBIR Phase II 2005 National Science Foundation
  8. Vascular Permeability Normalization in Ischemic Stroke

    SBC: Advanced Life Sciences, Inc.            Topic: N/A

    DESCRIPTION (provided by applicant): Stroke is the third leading cause of death in the United States and is the number one cause of adult disability. It is estimated that this clinical condition results in a cost of $30-40 billion in the U.S alone. While a large number of therapeutic agents have been investigated for the treatment of ischemic stroke, only one agent is currently approved for marke ...

    SBIR Phase I 2005 Department of Health and Human Services
  9. Wave Energy Harvesting to Power Unmanned Surface Vehicles

    SBC: Advanced Mechanical Technology, Inc.            Topic: N05T021

    Recent world events have highlighted the need for timely and accurate intelligence data to assess threats and combat terror. An unmanned surface vehicle (USV ) can potentially perform intelligence, surveillance and reconnaissance (ISR) missions, provide force protection, hunt for mines in coastal waters or harbors, and provide port security. USVs under development by the Navy are powered by the ...

    STTR Phase I 2005 Department of DefenseNavy
  10. Field-Expedient Combat Load Assessment Device (CLAD)

    SBC: Advanced Mechanical Technology, Inc.            Topic: A05176

    Field combat load assessment for combat training and combat mission personnel load management is an identified military need. The combat load assessment device or CLAD must meet several requirements not found in off-the-shelf commercial or consumer weighing devices. Weight requirements, accuracy requirements, functional requirements, and cost requirements prohibit the use of currently OTS hardwa ...

    SBIR Phase I 2005 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government