List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Cannula System for "Bridge to Recovery" Cardiac Assist

    SBC: ABIOMED, INC.            Topic: N/A

    DESCRIPTION (provided by applicant): Cardiac failure is the, largest single cause of mortality in the United States today. With an increase in the use of long-term cardiac assist devices, there is also a need for the short-term "bridge to recovery" application. This application is intended to provide a low-cost temporary support for patients whose heart is capable of recovering. This "patient scr ...

    SBIR Phase I 2005 Department of Health and Human Services
  2. Heated Thermoplastic Fiber Placement Head for NASA Langley Research Center

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: A404

    Reduced-mass polymer composite materials are crucial to the success of aerospace systems for reducing vehicle weight. But, composite material adoption is inhibited because the autoclave consolidation required is prohibitively expensive for the large tanks and skins contemplated in the Next Generation Launch Technology (NGLT) Program. To remedy this, NASA-LaRC has been developing cost-effective, ...

    SBIR Phase II 2005 National Aeronautics and Space Administration
  3. Optimal Composite Materials using NASA Resins or POSS Nanoparticle Modifications for Low Cost Fabrication of Large Composite Aerospace Structures

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: X602

    Reduced mass composite materials are crucial to the success of aerospace systems, but their adoption is inhibited because they require autoclave consolidation, a process that is prohibitively expensive for large aerospace structure. To remedy this, NASA-LaRC has been developing cost-effective high-performance thermoplastic composite processing equipment that enables out-of-autoclave tape placemen ...

    SBIR Phase I 2005 National Aeronautics and Space Administration
  4. SBIR Phase II: Advanced Phased Array Ultrasound Instrument for Nondestructive Evaluation (NDE)

    SBC: ACOUSTIC IDEAS, INC.            Topic: N/A

    This SBIR Phase II research project strives to develop an Advanced Ultrasonic Beamformer that is unparalleled in its scalability and signal processing features. The ultrasonic beamformer architecture will be unique in its breadth of features. The architecture was developed as the superset of features across several fields including medical imaging, medical therapy, bone density measurement, vascul ...

    SBIR Phase II 2005 National Science Foundation
  5. Wave Energy Harvesting to Power Unmanned Surface Vehicles

    SBC: Advanced Mechanical Technology, Inc.            Topic: N05T021

    Recent world events have highlighted the need for timely and accurate intelligence data to assess threats and combat terror. An unmanned surface vehicle (USV ) can potentially perform intelligence, surveillance and reconnaissance (ISR) missions, provide force protection, hunt for mines in coastal waters or harbors, and provide port security. USVs under development by the Navy are powered by the ...

    STTR Phase I 2005 Department of DefenseNavy
  6. Field-Expedient Combat Load Assessment Device (CLAD)

    SBC: Advanced Mechanical Technology, Inc.            Topic: A05176

    Field combat load assessment for combat training and combat mission personnel load management is an identified military need. The combat load assessment device or CLAD must meet several requirements not found in off-the-shelf commercial or consumer weighing devices. Weight requirements, accuracy requirements, functional requirements, and cost requirements prohibit the use of currently OTS hardwa ...

    SBIR Phase I 2005 Department of DefenseArmy
  7. SBIR Phase I: Low Cost Pressure Infiltration Casting Process to Support High Volume Manufacture of Graphite-Metal Thermal Management Components

    SBC: ADVANCED THERMAL TECHNOLOGIES            Topic: MI

    This Small Business Innovation Research (SBIR) Phase I project will develop a manufacturing technology to support the pressure infiltration casting process to produce large billets of a graphite-metal material. The improved process will yield to substantial finished part cost saving. There is a critical need for advanced materials with improved thermal properties capable of meeting the thermal man ...

    SBIR Phase I 2005 National Science Foundation
  8. Engineered Materials for improved Airborne Laser Mine Detection Systems

    SBC: ADVR, Inc            Topic: BMDO02001

    This Navy SBIR Phase II effort will develop the processing steps required to fabricate high quality periodically poled stoichiometric lithium tantalate (PPSLT) and demonstrate its utility for use in both current and emerging Airborne Laser Mine Detection Systems (ALMDS) by enabling highly efficient laser wavelenth conversion. The proposed optical material will also support the development of shor ...

    SBIR Phase II 2005 Department of DefenseNavy
  9. A narrowband, frequency-agile laser for optical interrogation of arrayed fiber optic sensors

    SBC: ADVR, Inc            Topic: AF02005

    The VIRGINIA Class submarine employs the Light-Weight Wide Aperture Array (LWWAA) hull-mounted array of fiber-optic hydrophones that requires the use of high performance, narrowband lasers. In this Navy Phase II SBIR effort, a prototype laser for the LWWAA hull-array sensor will be developed using the frequency-stabilized semiconductor laser technology demonstrated during the Phase I effort. The ...

    SBIR Phase II 2005 Department of DefenseNavy
  10. Compact, Low-Cost, Frequency-Locked Semiconductor Laser for Injection Seeding High Power Laser

    SBC: ADVR, Inc            Topic: E102

    This NASA Small Business Innovative Research Phase II project will develop a compact, low-cost, wavelength locked seed laser for injection locking high powered Nd:YAG lasers used in a range of lidar remote sensing applications including molecular profiling of the atmosphere. Precise wavelength control of the seed laser will be achieved by actively locking the laser wavelength to an absorption li ...

    SBIR Phase II 2005 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government