List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Cannula System for "Bridge to Recovery" Cardiac Assist

    SBC: ABIOMED, INC.            Topic: N/A

    DESCRIPTION (provided by applicant): Cardiac failure is the, largest single cause of mortality in the United States today. With an increase in the use of long-term cardiac assist devices, there is also a need for the short-term "bridge to recovery" application. This application is intended to provide a low-cost temporary support for patients whose heart is capable of recovering. This "patient scr ...

    SBIR Phase I 2005 Department of Health and Human Services
  2. Field Deployable Diagnostic Test for Active Cutaneous Leishmania and a Test for Latent Infection

    SBC: ACCESS BIO, INC.            Topic: A04177

    Leishmaniasis has significant impact on military and civilian populations throughout the Asia-Africa region, including Afghanistan and Iraq. There are currrentlly no proper field-deployable diagnostic tools for the key form, cutaneous leishmaniasis. Development of an assay which detects cutaneous leishmaniasis, that is rapid, accurate, field usable, soldier-friendly, and meets regulatory requireme ...

    SBIR Phase I 2005 Department of DefenseArmy
  3. Heated Thermoplastic Fiber Placement Head for NASA Langley Research Center

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: A404

    Reduced-mass polymer composite materials are crucial to the success of aerospace systems for reducing vehicle weight. But, composite material adoption is inhibited because the autoclave consolidation required is prohibitively expensive for the large tanks and skins contemplated in the Next Generation Launch Technology (NGLT) Program. To remedy this, NASA-LaRC has been developing cost-effective, ...

    SBIR Phase II 2005 National Aeronautics and Space Administration
  4. Optimal Composite Materials using NASA Resins or POSS Nanoparticle Modifications for Low Cost Fabrication of Large Composite Aerospace Structures

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: X602

    Reduced mass composite materials are crucial to the success of aerospace systems, but their adoption is inhibited because they require autoclave consolidation, a process that is prohibitively expensive for large aerospace structure. To remedy this, NASA-LaRC has been developing cost-effective high-performance thermoplastic composite processing equipment that enables out-of-autoclave tape placemen ...

    SBIR Phase I 2005 National Aeronautics and Space Administration
  5. SBIR Phase II: Advanced Phased Array Ultrasound Instrument for Nondestructive Evaluation (NDE)

    SBC: ACOUSTIC IDEAS, INC.            Topic: N/A

    This SBIR Phase II research project strives to develop an Advanced Ultrasonic Beamformer that is unparalleled in its scalability and signal processing features. The ultrasonic beamformer architecture will be unique in its breadth of features. The architecture was developed as the superset of features across several fields including medical imaging, medical therapy, bone density measurement, vascul ...

    SBIR Phase II 2005 National Science Foundation
  6. FIBER REINFORCED CERAMIC RADOME MATERIAL WITH IMPROVED RESISTANCE TO THERMAL SHOCK, HIGH TEMPERATURE, AND EROSION

    SBC: ADVANCED CERAMETRICS, INC.            Topic: N03080

    For this research, Advanced Cerametrics, (ACI)will combine its patented fiber forming technology with conventional ceramic forming methods including slip casting, injection molding and isostatic pressing to develop a low cost and economically scalable method to make ceramic fiber reinforced ceramic matrix composite missile radomes for hypersonic flight. The matrix material is high-celsian barium a ...

    SBIR Phase II 2005 Department of DefenseNavy
  7. Alternative Methods of Wireless Sensor Power via Novel Piezoelectric Fiber Composites

    SBC: ADVANCED CERAMETRICS, INC.            Topic: N05130

    Currently, wireless sensors have been used in variety of applications such as real-time data sharing, surveillance, in-vivo medical devices, condition-based monitoring, etc. that can revolutionize industrial efficiency, health monitoring, and data processing. Maximizing the use of wireless sensors onboard Navy ships will reduce the cost of maintenance and manpower. A state-of-the-art destroyer s ...

    SBIR Phase I 2005 Department of DefenseNavy
  8. A Device for Measuring Gas Polarization

    SBC: Advanced Liquid Crystal Technologies            Topic: N/A

    DESCRIPTION (provided by applicant): This project is to develop an instrument to measure the polarization of a hyperpolarized noble gas, Helium- 3 and Xenon-129, for enhanced lung MRIs in a clinical environment. It is essential to have some means of measuring polarization at various stages in the handling of these gases, e.g. at production, storage, transport and administration to a patient. Th ...

    SBIR Phase II 2005 Department of Health and Human Services
  9. Wave Energy Harvesting to Power Unmanned Surface Vehicles

    SBC: Advanced Mechanical Technology, Inc.            Topic: N05T021

    Recent world events have highlighted the need for timely and accurate intelligence data to assess threats and combat terror. An unmanned surface vehicle (USV ) can potentially perform intelligence, surveillance and reconnaissance (ISR) missions, provide force protection, hunt for mines in coastal waters or harbors, and provide port security. USVs under development by the Navy are powered by the ...

    STTR Phase I 2005 Department of DefenseNavy
  10. Field-Expedient Combat Load Assessment Device (CLAD)

    SBC: Advanced Mechanical Technology, Inc.            Topic: A05176

    Field combat load assessment for combat training and combat mission personnel load management is an identified military need. The combat load assessment device or CLAD must meet several requirements not found in off-the-shelf commercial or consumer weighing devices. Weight requirements, accuracy requirements, functional requirements, and cost requirements prohibit the use of currently OTS hardwa ...

    SBIR Phase I 2005 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government