You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Cannula System for "Bridge to Recovery" Cardiac Assist

    SBC: ABIOMED, INC.            Topic: N/A

    DESCRIPTION (provided by applicant): Cardiac failure is the, largest single cause of mortality in the United States today. With an increase in the use of long-term cardiac assist devices, there is also a need for the short-term "bridge to recovery" application. This application is intended to provide a low-cost temporary support for patients whose heart is capable of recovering. This "patient scr ...

    SBIR Phase I 2005 Department of Health and Human ServicesNational Institutes of Health
  2. Heated Thermoplastic Fiber Placement Head for NASA Langley Research Center

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: A404

    Reduced-mass polymer composite materials are crucial to the success of aerospace systems for reducing vehicle weight. But, composite material adoption is inhibited because the autoclave consolidation required is prohibitively expensive for the large tanks and skins contemplated in the Next Generation Launch Technology (NGLT) Program. To remedy this, NASA-LaRC has been developing cost-effective, ...

    SBIR Phase II 2005 National Aeronautics and Space Administration
  3. Optimal Composite Materials using NASA Resins or POSS Nanoparticle Modifications for Low Cost Fabrication of Large Composite Aerospace Structures

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: X602

    Reduced mass composite materials are crucial to the success of aerospace systems, but their adoption is inhibited because they require autoclave consolidation, a process that is prohibitively expensive for large aerospace structure. To remedy this, NASA-LaRC has been developing cost-effective high-performance thermoplastic composite processing equipment that enables out-of-autoclave tape placemen ...

    SBIR Phase I 2005 National Aeronautics and Space Administration
  4. SBIR Phase II: Advanced Phased Array Ultrasound Instrument for Nondestructive Evaluation (NDE)

    SBC: ACOUSTIC IDEAS, INC.            Topic: N/A

    This SBIR Phase II research project strives to develop an Advanced Ultrasonic Beamformer that is unparalleled in its scalability and signal processing features. The ultrasonic beamformer architecture will be unique in its breadth of features. The architecture was developed as the superset of features across several fields including medical imaging, medical therapy, bone density measurement, vascul ...

    SBIR Phase II 2005 National Science Foundation
  5. EFFICIENT AND EFFECTIVE MOBILE DATA CAPTURE IN AN ACRIN CLIN TRIAL ENVIRON

    SBC: ADVANCED DIGITAL SYSTEMS, INC.            Topic: N/A

    N/A

    SBIR Phase II 2005 Department of Health and Human ServicesNational Institutes of Health
  6. Nanodroplet PCR Lab-Chip for Clinical Pathogen Detection

    SBC: ADVANCED LIQUID LOGIC            Topic: N/A

    DESCRIPTION (provided by applicant): Rapid and accurate detection and identification of pathogens is crucial for the effective management and treatment of infectious disease. While molecular diagnostic techniques including PCR are a promising approach for rapid and sensitive detection of pathogens, they suffer from a number of technical drawbacks which have slowed their acceptance in the clinic. ...

    SBIR Phase I 2005 Department of Health and Human ServicesNational Institutes of Health
  7. Wave Energy Harvesting to Power Unmanned Surface Vehicles

    SBC: Advanced Mechanical Technology, Inc.            Topic: N05T021

    Recent world events have highlighted the need for timely and accurate intelligence data to assess threats and combat terror. An unmanned surface vehicle (USV ) can potentially perform intelligence, surveillance and reconnaissance (ISR) missions, provide force protection, hunt for mines in coastal waters or harbors, and provide port security. USVs under development by the Navy are powered by the ...

    STTR Phase I 2005 Department of DefenseNavy
  8. Field-Expedient Combat Load Assessment Device (CLAD)

    SBC: Advanced Mechanical Technology, Inc.            Topic: A05176

    Field combat load assessment for combat training and combat mission personnel load management is an identified military need. The combat load assessment device or CLAD must meet several requirements not found in off-the-shelf commercial or consumer weighing devices. Weight requirements, accuracy requirements, functional requirements, and cost requirements prohibit the use of currently OTS hardwa ...

    SBIR Phase I 2005 Department of DefenseArmy
  9. 3 Dimensional Nano-Scale Reinforcement Architecture for Advanced Composite Structures

    SBC: 3TEX, Inc.            Topic: AF04T020

    Three-dimensional woven and braided fiber architectures provide important advantages to composites, including suppression of delamination, high damage tolerance, improved through-the-thickness properties, simplicity and cost-effectiveness of manufacturing complex composite structural components. However, in order to diversify applications and reach high volumes of utilization of these materials in ...

    STTR Phase II 2005 Department of DefenseAir Force
  10. Novel Structural Joining Concepts Using 3-D Textile Preforms and Composites

    SBC: 3TEX, Inc.            Topic: AF05248

    Strength and durability of commonly used bonded and bolted composite-to-composite and composite-to-metal structural joints suffer from sharp geometry variations, mismatch of elastic moduli, Poisson's ratios, coefficients of thermal expansion and thermal conductivity of the adherends, altogether causing high stress concentration and premature joint failure. The proposed work introduces several nove ...

    SBIR Phase I 2005 Department of DefenseAir Force
US Flag An Official Website of the United States Government