List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

Displaying 1 - 10 of 3837 results
  1. WesTest Hardware Modeler for LASAR Digital Device Simulationcompatible with the VDATS Di-Series digital subsystem

    SBC: WESTEST ENGINEERING CORPORATION            Topic: AF172005

    Many custom and hybrid integrated circuits (ICs) and custom electronic components cannot bemodeled in simulation software because of their complexity and/or lack of technical data.TPS developers need to use a hardware modeler for these types of integrated circuits.The proposed WesTest Hardware Modeler will be compatible with LASAR and the VDATS Di-Series digital subsystem.It utilizes the Teradyne ...

    SBIR Phase I 2018 Department of DefenseAir Force
  2. Nonflammable Battery

    SBC: Physical Sciences Inc.            Topic: AF173005

    Physical Sciences Inc. (PSI) will demonstrate a non-flammable, high power rechargeable battery design capable of 20C discharge rates after activation from an inert, inactive state. This battery will be constructed by combining PSIs non-flammable electrolyte and high active (HA) coating technologies. During the Phase I, PSI will demonstrate that the electrolyte is non-flammable both as an aerosol a ...

    SBIR Phase I 2018 Department of DefenseAir Force
  3. Additively Manufactured Fractal Heat Exchanger

    SBC: Physical Sciences Inc.            Topic: AF173006

    Physical Sciences Inc. (PSI) will develop an innovative refrigeration condenser for airborne applications based on PSIs established fractal heat exchanger geometry. This configuration is 60% smaller and 20% lighter than comparable heat exchangers because it uses a branched feed network instead of pipe headers (the heaviest parts of existing heat exchangers).Test articles will be produced with a vo ...

    SBIR Phase I 2018 Department of DefenseAir Force
  4. Probabilistic Programming for Analyzing Complex Systems (PPACS)

    SBC: Charles River Analytics, Inc.            Topic: AF173009

    Development planning is a critical task in the US Air Force (USAF) that is required to efficiently acquire new and improved vehicles, analyze strategic and tactical gaps in the USAFs missions, guide investment strategies of new technologies, and plan for future workforce skills. One of the key development planning tasks is analyzing the impacts of alternative designs on the potential system of sys ...

    SBIR Phase I 2018 Department of DefenseAir Force
  5. Collective / Cooperative Navigation

    SBC: SYSTEMS & TECHNOLOGY RESEARCH LLC            Topic: AF173011

    Maintaining accurate navigation in GPS-denied conditions is critical for the U.S. military.Making inter-platform measurements and sharing data between multiple cooperating platforms has the potential to significantly enhance navigation accuracy, mitigating the loss of GPS.System & Technology Research and West Virginia University are developing a novel software framework for such cooperative naviga ...

    SBIR Phase I 2018 Department of DefenseAir Force
  6. An Advanced, Insensitive Munition (IM) Compliant, Multi-Mode Energetic Material System for Active Protection Interceptor Munition Systems

    SBC: Physical Sciences Inc.            Topic: AF173012

    Physical Sciences Inc. proposes to demonstrate and quantify a unique high performance, insensitive munition compliant, dual mode energetic material that would allow stable propulsive and detonative operations. This new formulation has a high specific impulse and density specific impulse while simultaneously retaining the detonative performances of modern explosives. This unique low-cost energetic ...

    SBIR Phase I 2018 Department of DefenseAir Force
  7. Developing Aluminum-Based Metallic Glass Alloys for use in the Additive Manufacture of High-Toughness Aerospace Components

    SBC: NANOAL LLC            Topic: AF173014

    The additive manufacture of metal components from powder feedstocki.e. the net-shape, three-dimensional forming of a component, layer by layer, from a computer filehas gained popularity in the last nearly three decades, evolving from a method of rapid prototyping to rapid manufacturing. These methods are inherently far-from-equilibrium and present a significant, economical method to fabricate bulk ...

    SBIR Phase I 2018 Department of DefenseAir Force
  8. Model Based Systems Engineering Big Data Analytics

    SBC: Vistology, Inc.            Topic: AF173015

    The amount of cross-domain data available to the designer today, and the speed at which it continues to grow is unprecedented. The data often come from heterogeneous sources that were developed independently, without a consensus on the syntax or semantics. The integration of the heterogeneous data is possible because of the access to its respective metadata, or data about data. The availability of ...

    SBIR Phase I 2018 Department of DefenseAir Force
  9. VISHWA SPACE DEBRIS ENGAGEMENT AND DEORBITING SYSTEM

    SBC: VISHWA ROBOTICS AND AUTOMATION LLC            Topic: AF173016

    Spent Rocket Bodies (SRB) from decades of launch of satellites into Earth orbit are the largest component of space debris by mass, and they may pose a significant present and future threat to operation of space systems in certain orbits. Most of these objects will remain in place for several more decades before they re-enter the Earths atmosphere and eventually burn up. Recognizing the broader cha ...

    SBIR Phase I 2018 Department of DefenseAir Force
  10. Wireless Technology for Probes and Accessories for Nondestructive Inspection Testing Instruments

    SBC: Jentek Sensors, Inc.            Topic: AF121214

    Aircraft structure nondestructive testing (NDT) is performed in a field or depot setting depending primarily on the amount of disassembly required to gain access to the inspection area. In order to reach set field and depot inspection intervals, the minimum detectable flaw size (Andi) must be sufficiently small. Legacy NDT methods with Andi's that are too large require out of cycle inspections whi ...

    SBIR Phase II 2018 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government