List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Development of Low Dark Current Strained Layer Superlattice (SLS) Devices for Next Generation Infrared Focal Plane Arrays

    SBC: Magnolia Optical Technologies, Inc.            Topic: MDA03T002

    Next generation EO/IR sensors are needed for a variety of Military Systems Applications. These include UV, Visible, NIR, SWIR, MWIR and LWIR bands. Magnolia as part of the proposed Phase II STTR Program plans to design, model and develop Strained Layer Superlattice (SLS) based detector array for next generation multicolor IR imaging applications. The key components of the Program will include eva ...

    STTR Phase II 2011 Department of DefenseDefense Advanced Research Projects Agency
  2. Probabilistic and Relational Inferences in Dynamic Environments (PRIDE)

    SBC: Charles River Analytics, Inc.            Topic: ST081004

    Uncertainty on the modern battlefield makes mission planning and decision making extremely complex for field commanders. Mission planners can be aided by initial and ongoing situation assessment, future state estimation, assessment of the current plan"s probability of success, what-if analysis, and suggestions for decisions. At present, few automated tools exist to provide mission planners with th ...

    STTR Phase II 2011 Department of DefenseDefense Advanced Research Projects Agency
  3. Rapid, Quantitative Biological Indicator System with Bacillus thuringiensis Al Hakam Spores(1001-677)

    SBC: Triton Systems, Inc.            Topic: CBD11101

    Biological agents pose high threats, because they are invisible and odorless and a relatively small amount can infect a large population when released in a densely populated area. For the same reasons, assuring safety after cleaning decontaminated sites can be challenging. Currently available technologies require considerable labor, and results typically cannot be obtained before 24 V 48 hours up ...

    SBIR Phase I 2011 Department of DefenseOffice for Chemical and Biological Defense
  4. Narrowband Perfect Absorber using Metamaterials

    SBC: Phoebus Optoelectronics LLC            Topic: CBD11102

    We propose a metamaterial-enhanced microbolometer with strong absorption over a narrow band that is dynamically tunable over the 8-10 micron band. A single-layer photonic metamaterial consisting of a thin metal film perforated with a 2-D array of dielectric apertures will be deposited on an amorphous-Silicon layer acting as an absorber and bolometer. The metamaterial, in conjunction with planar di ...

    SBIR Phase I 2011 Department of DefenseOffice for Chemical and Biological Defense
  5. Ruggedized FTIR Spectrometer Based on Calomel Prisms

    SBC: AGILTRON, INC.            Topic: CBD11104

    Leveraging on Agiltron industry leading development of optical systems and the PI experience with FTIR spectrometer design, we propose to develop a new class of compact monolithic Fourier-transform spectrometers for the long-wave (7.5-13 m) infrared optical range. The proposed solution is based on creating a spatial interferogram with a pair of a calomel Wollaston prisms and digitizing it with an ...

    SBIR Phase I 2011 Department of DefenseOffice for Chemical and Biological Defense
  6. Multiplex Microsphere Assay for Botulinum Neutralizing Antibodies

    SBC: AGAVE BIOSYSTEMS INC.            Topic: CBD11109

    Currently, the accepted standard experimental model for measuring protective efficacy against botulism is the Mouse Lethality Neutralization (MLN) assay. Botulism poisoning is a life threatening condition that is not only a public health concern, but could also be a potential biological weapon. With seven serotypes of botulinum neurotoxins, there is need for an alternative to the MLN assay due t ...

    SBIR Phase I 2011 Department of DefenseOffice for Chemical and Biological Defense
  7. Handheld Apps for Warfighters

    SBC: Janya Inc.            Topic: SB102002

    Timely gathering and sharing of intelligence information is vital to the efficient execution of military missions. Much of the information collected in the field is impossible to exploit quickly because it is in hardcopy form, and handwritten. A mobile application that is capable of capturing handwritten documents and quickly converting the document image to electronic text will fill a critical ne ...

    SBIR Phase I 2011 Department of DefenseDefense Advanced Research Projects Agency
  8. Adaptive Multi-Media Streaming for Android (AMMSTAR)

    SBC: MZEAL COMMUNICATIONS, INC.            Topic: SB102002

    Use of"Smartphones"and cellular networks is becoming an increasing priority for military applications. By placing the source of information directly with the solider on the ground via a Smartphone, the vision of"every soldier a sensor"becomes attainable. mZeal proposes to facilitate this vision with the Adaptive Multi-Media Streaming for Android (AMMSTAR) system. AMMSTAR will capture photographic ...

    SBIR Phase I 2011 Department of DefenseDefense Advanced Research Projects Agency
  9. Low Noise, High Efficiency Hydraulics for Mobile Robots

    SBC: VISHWA ROBOTICS AND AUTOMATION LLC            Topic: SB103001

    Biologically-inspired motions such as flapping, perching, walking, running, swimming, grasping and manipulating, are difficult for the most advanced robots today. The primary limitation comes from actuation technology in terms of stress/strain ratio delivered to the joint by the actuator overcoming specific resistance. Electromagnetic motors have low torque at high speeds and hence cannot be used ...

    SBIR Phase I 2011 Department of DefenseDefense Advanced Research Projects Agency
  10. Robot Fabrication via Layered Manufacturing

    SBC: Cyphy Works, Inc.            Topic: SB103002

    In this phase I proposal, we seek a solution to the problem of wiring sensors and actuators on periphery of a robot"s frame(i.e. those positioned to make contact with environment). We will accomplish this using printing technologies and a new proprietary layered carbon fiber forming technology. Because we will enhance segments from CyPhy Works UAV with this technology, this project will have a ...

    SBIR Phase I 2011 Department of DefenseDefense Advanced Research Projects Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government