List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

Displaying 1 - 10 of 32734 results
  1. Efficient cFS-based On-board Lamberts Solution for DSMs

    SBC: Advanced Space LLC            Topic: T11

    Distributed Spacecraft Missions (DSM) architectures provide unique scientific and programmatic benefits including multipoint in-situ measurements, multi-angle viewpoints, and improved understanding of the connections between separately measured phenomena and their time variations. However, these missions impose significant operational demands on ground tracking resources and mission operators alik ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  2. Electrical Power from Thermal Energy Scavenging in High Temperature Environments

    SBC: Physical Sciences Inc.            Topic: T3

    Physical Sciences Inc. and Purdue University propose to develop a novel approach to scavenging heat from high intensity thermal environments encountered during space missions and converting this thermal power to electrical power at high efficiency.  Examples include extremely hot heat shields during vehicle entry into planetary atmospheres (Mars/Venus probes) and during high speed ascent thro ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  3. Easy-to-use, Autonomous Bin-picking and Assembly Operations for the Manufacturing Industry

    SBC: Robotic Materials Inc.            Topic: None

    We will develop a series of object manipulation primitives to pick up and assemble standard mechanical parts such as screws, gears and pulleys that can be configured without any programming skills. Building up on a smart robotic gripper, 3D perception and machine learning algorithms, we will design a graphical user interface for the Universal Robot E-Series that allows an user to label arbitrary 3 ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  4. Developing Silicon Nanowire Sensors to Measuring Host-Cell Proteins at a Biomanufacturing Line

    SBC: Advanced Silicon Group            Topic: None

    Our biosensor is made of silicon nanowire arrays functionalized with antibodies to measure the concentration of specific proteins. In this grant we will take a sensor that has been demonstrated for use in measuring a set of generic host cell proteins and we will apply the sensor to measure a set of proteins for a specific cell line. In doing so, we will demonstrate the utility of our sensor to be ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  5. High Energy Density, Long Cycle Life and Safe Li-S Battery

    SBC: ADA Technologies, Inc.            Topic: A17050

    The U.S. Army has identified a need for improved soldier and device mobility. To address these needs, ADA Technologies Inc. (ADA) will develop and commercialize our high energy density, long cycle life and safe lithium-sulfur (Li-S) battery technology. Our solution is based on proven material design strategies that will improve cell constituent stability via the use of atomic level coatings on the ...

    SBIR Phase I 2019 Department of DefenseArmy
  6. Novel Combustible Cartridge Cases for Next Generation Small Arms Ammunition

    SBC: ROCKY MOUNTAIN SCIENTIFIC LABORATORY, LLC            Topic: A18013

    The loadout that a deployed soldier carries is between 97-135 lbs, approximately 5lbs of which are inert brass. This weight not only reduces the soldiers responsiveness during battle but can increase fatigue.Much time and money has been spent on reducing ammunition weight by replacing heavy brass casings with steel or polymers. While these show promise, a combustible cartridge case will not only r ...

    SBIR Phase I 2019 Department of DefenseArmy
  7. DEVELOPMENT OF A NOVEL TRANSMISSION FOR HELICOPTER APPLICATIONS

    SBC: VISHWA ROBOTICS AND AUTOMATION LLC            Topic: A16018

    US Army utilizes a wide range of vehicles across ground and air platforms where mechanical transmissions are used to transmit power from the engine to the drive shaft. Gears are used to create a torque and speed conversion with mechanical contact between the gear teeth surfaces. Lubrication is necessary to create a protective film between rolling and sliding surfaces as well as provide sufficient ...

    SBIR Phase II 2019 Department of DefenseArmy
  8. Signal Processing at Radio Frequency (RF) for Position Navigation & Timing Co-Site Interference

    SBC: Metamagnetics Inc.            Topic: A17039

    Numerous operations in an increasingly congested electromagnetic spectrum, intensify demand for data at the tactical edge, and the diminishing extent of electromagnetic spectrum provisioned for the military has resulted in the need for advanced technologies to mitigate Global Positioning System (GPS) interference due to co-site interference and C4ISR. Metamagnetics proposes a powerful and adaptabl ...

    SBIR Phase II 2019 Department of DefenseArmy
  9. CMOS Compatible Deposition of Multi-Ferroic Films for Tunable Microwave Applications

    SBC: Winchester Technologies, LLC            Topic: A17019

    Built upon the progress in Phase I period, Winchester Technologies, LLC proposes to investigate practical magnetoelectric antennas during the Phase II period for different applications. State of the art antennas suffer from three major open challenges: (1) large antenna size, (2) antenna impedance mismatch; (3) ground plane effect. This is because state of the art antennas are based on oscillating ...

    SBIR Phase II 2019 Department of DefenseArmy
  10. Development of a Stochastic Multi-dimensional Fire Modeling and Simulation Software Package

    SBC: ADA Technologies, Inc.            Topic: A17073

    Fire can act extremely quickly in military shelters. Improving fire safety begins with understanding the fire dynamics associated with each system. All current shelters are evaluated for fire safety on a component basis only; there are no specifications for how the overall system design relates to generation of flame, heat, and smoke. As such, the Army needs a three-dimensional, reliable and valid ...

    SBIR Phase II 2019 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government