List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. VASCULAR STAPLER

    SBC: ABIOMED, INC.            Topic: N/A

    THE OBJECTIVE OF THIS PROGRAM IS TO DESIGN AND BUILD A STAPLER FOR PERFORMING END-TO-END AND END-TO-SIDE ANASTOMOSES ON MEDIUM TO LARGE VESSELS, AND FOR REPAIRING BLOOD VESSELS AND VASCULAR ANEURYSMS, AND TO DEVELOP A SURGICAL PROTOCOL FOR ITS USE. THE METHOD PROPOSED USES A SPECIAL STAPLER AND CONFIGURATION OF STAPLES WHICH MINIMIZESBLOOD CONTACT WITH THE STAPLES, DOES NOT RESTRICT THE FLOW OF BL ...

    SBIR Phase I 1988 Department of Health and Human Services
  2. ULTRAMINIATURE IMPLANTABLE ELECTRICAL CONNECTOR

    SBC: ABIOMED, INC.            Topic: N/A

    N/A

    SBIR Phase I 1988 Department of Health and Human Services
  3. SUPPORTED MOLTEN SALT CATALYSIS OF ENDOTHERMIC REACTION OF HIGH ENERGY-DENSITY AVIATION FUELS

    SBC: Accel Catalysis Inc.            Topic: N/A

    THE PROPOSED WORK INVOLVES APPLICATION OF SUPPORTED MOLTEN SALT CATALYSIS TO THE CATALYTIC ENDOTHERMIC DEHYDROGENATION OF HIGH ENERGY-DENSITY AVIATION FUELS. THE CATALYSTS OF INTEREST ARE HETEROGENEOUSLY DISPERSED PLATINUM AND NICKEL, TO BE USED ALONE OR IN BIMETALLIC CLUSTERS. THE MOLTEN SALTS TO BE USED INCLUDE BINARY AND TERNARY EUTECTICS INVOLVING ALKALI METAL CHLORIDES AND HYDROXIDES. THE SUP ...

    SBIR Phase I 1988 Department of DefenseAir Force
  4. SUPPORTED MOLTEN SALT DEHYDROGENTATION OF METHANOL

    SBC: Accel Catalysis Inc.            Topic: N/A

    N/A

    SBIR Phase I 1988 Department of DefenseAir Force
  5. ONE-WAY DOPPLER MEASUREMENT

    SBC: ADCOM SYSTEMS TECHNOLOGY,INC.            Topic: N/A

    INNOVATIVE APPROACHES ARE DESCRIBED IN THIS PROPOSAL FOR SUPPRESSING FREQUENCY MODULATION ON A SINUSOIDAL CARRIER. PARTICULAR EMPHASIS IS DIRECTED TO THE SUPPRESSION OF IDENTIFIABLE COMPONENTS OF A COMPOSITE MODULATION PROCESS FOR THE PURPOSE OF RETAINING, FOR SEPARATE MEASUREMENT, ANY FORM OF RANGE-RATE DOPPLER SHIFT/MODULATION PRESENT. THE PROPOSED EFFORT WILL CONSIST OF AN ANALYTICAL STUDY FOR ...

    SBIR Phase I 1988 Department of DefenseArmy
  6. ON-LINE PURIFIERS FOR CHEMICAL VAPOR DEPOSITION

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    THE MATERIALS USED IN THIN-FILM PHOTOVOLTAIC CELLS AND MANY OTHER SEMICONDUCTOR DEVICES ARE FREQUENTLY GROWN USING CHEMICAL VAPOR DEPOSITION (CVD) OR OTHER VAPOR-BASED PROCESSES. MANY OF THE PROCESS GASES USED, FOR EXAMPLE, ARSINE, PHOSPHINE, AMMONIA, DIBORANE, AND SILANE, ARE HIGHLY REACTIVE. CONTAMINATION, CHEMICAL OR PARTICULATE, OF THESE REACTIVE GASES SERIOUSLY INTERFERES WITH DEVICE PERFORMA ...

    SBIR Phase II 1988 Department of Energy
  7. "REDUCTION OF ELECTRONICS INDUSTRY TOXIC AIR EMISSIONS THROUGH THE USE OF A NOVEL VENT GAS SCRUBBER"

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    THE RAPID GROWTH OF THE AMERICAN MICROELECTRONICS INDUSTRY HAS SPAWNED NEW ENVIRONMENTAL PROBLEMS ASSOCIATED WITH THE PROCESSES USED TO PREPARE SEMICONDUCTOR CHIPS, THE KEY COMPONENTS OF SOPHISTICATED ELECTRONIC DEVICES. MOST OF THESE PROBLEMS HAVE BEEN IGNORED BECAUSE RELATIVELY LOW VOLUMES OF CHEMICALS ARE ASSOCIATED WITH SEMICONDUCTOR FABRICATION. HOWEVER, THE EXCEPTIONALLY HIGH TOXICITY OF THE ...

    SBIR Phase II 1988 Environmental Protection Agency
  8. INTERMETALLIC COMPOSITES

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    INTERMETALLIC COMPOUNDS ARE KNOWN FOR THEIR HIGH MELTING POINTS AND CORROSION AND OXIDATION RESISTANCE. MANY OF THESE COMPOUNDS HAVE LOW DENSITIES AND VERY HIGH STRENGTHS AND, THEREFORE, ARE OF INTEREST FOR HIGH TEMPERATURE AEROSPACE AND SPACE STRUCTURE APPLICATIONS. HOWEVER,CONVENTIONAL PROCESSING OF INTERMETALLIC COMPOUNDS SUFFERS SEVERE LIMITATIONS: REACTIONS WITH CONTAINERS, POROSITY, CONTAMIN ...

    SBIR Phase I 1988 Department of DefenseDefense Advanced Research Projects Agency
  9. MANUFACTURING METHOD FOR ALUMINUM COATED GLASS FIBERS

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    ALUMINUM COATED GLASS FIBERS HAVE FOUND BROAD BASED USE AS RADAR CHAFF, HOWEVER, EXISTING METHODS OF MANUFACTURE ARE GENERALLY HIGH COST AND DO NOT OPTIMIZE ADHESION BETWEEN METAL AND GLASS WHICH MAY LEAD TO PERFORMANCE LOSS DURING HANDLING OR PROCESSING. BY UTILIZING A HIGH SPEED, LOW CAPITAL COST PROCESS SUCH AS CHEMICAL VAPOR DEPOSITION (CVD) IN COMBINATION WITH NOVEL INTERLAYER TECHNOLOGY, A P ...

    SBIR Phase I 1988 Department of DefenseAir Force
  10. METALORGANIC MOLECULAR BEAM EPITAXY

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    N/A

    SBIR Phase I 1988 Department of DefenseMissile Defense Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government