You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. VASCULAR STAPLER

    SBC: ABIOMED, INC.            Topic: N/A

    THE OBJECTIVE OF THIS PROGRAM IS TO DESIGN AND BUILD A STAPLER FOR PERFORMING END-TO-END AND END-TO-SIDE ANASTOMOSES ON MEDIUM TO LARGE VESSELS, AND FOR REPAIRING BLOOD VESSELS AND VASCULAR ANEURYSMS, AND TO DEVELOP A SURGICAL PROTOCOL FOR ITS USE. THE METHOD PROPOSED USES A SPECIAL STAPLER AND CONFIGURATION OF STAPLES WHICH MINIMIZESBLOOD CONTACT WITH THE STAPLES, DOES NOT RESTRICT THE FLOW OF BL ...

    SBIR Phase I 1988 Department of Health and Human Services
  2. Miniature Elctrohydraulic Total Artificial Heart

    SBC: ABIOMED, INC.            Topic: N/A

    The limited availability of donor hearts for people with end stage heart failure has driven the condevelopment of mechanical circulatory support systems (MCSSs). MCSSs can be broadly classified intocontinuous flow systems. Pulsatile systems drive blood indirectly through blood pumps, resulting inThis disadvantage of these systems, however, is their relatively large size. Continuous flow systemssim ...

    SBIR Phase II 1998 Department of Health and Human Services
  3. ANTITHROMBOTIC TISSUE SOLDER FOR MICROVASCULAR REPAIRS

    SBC: ABIOMED, INC.            Topic: N/A

    N/A

    SBIR Phase II 1998 Department of Health and Human Services
  4. ULTRAMINIATURE IMPLANTABLE ELECTRICAL CONNECTOR

    SBC: ABIOMED, INC.            Topic: N/A

    N/A

    SBIR Phase I 1988 Department of Health and Human Services
  5. SUPPORTED MOLTEN SALT CATALYSIS OF ENDOTHERMIC REACTION OF HIGH ENERGY-DENSITY AVIATION FUELS

    SBC: Accel Catalysis Inc.            Topic: N/A

    THE PROPOSED WORK INVOLVES APPLICATION OF SUPPORTED MOLTEN SALT CATALYSIS TO THE CATALYTIC ENDOTHERMIC DEHYDROGENATION OF HIGH ENERGY-DENSITY AVIATION FUELS. THE CATALYSTS OF INTEREST ARE HETEROGENEOUSLY DISPERSED PLATINUM AND NICKEL, TO BE USED ALONE OR IN BIMETALLIC CLUSTERS. THE MOLTEN SALTS TO BE USED INCLUDE BINARY AND TERNARY EUTECTICS INVOLVING ALKALI METAL CHLORIDES AND HYDROXIDES. THE SUP ...

    SBIR Phase I 1988 Department of DefenseAir Force
  6. SUPPORTED MOLTEN SALT DEHYDROGENTATION OF METHANOL

    SBC: Accel Catalysis Inc.            Topic: N/A

    N/A

    SBIR Phase I 1988 Department of DefenseAir Force
  7. Manufacturing Methods for Sulfur Concrete Sewer Pipe

    SBC: Brimstone Pipe Company            Topic: N/A

    This Phase I research is intended to evaluate the feasibility of manufacturing low-cost, acid-resistant sanitary sewer pipe from sulfur concrete. Sulfur is an abundant mineral recovered from coking, natural gas processing, and petroleum refining. Secondary recovery of sulfur, resulting from environmental regulation, produces more material than is needed by U.S. industry. The U.S. Bureau of Mines ...

    SBIR Phase II 1998 Environmental Protection Agency
  8. Electronically Shunted Smart Material Damper Packages for Extreme Environments

    SBC: Active Control eXperts, Inc.            Topic: N/A

    ACX proposes an alternate approach to damping for extreme environments, which uses an electrically shunted, surface mounted, smart material. This shunting approach has been most widely used in less extreme environments in conjunction with piezoceramic materials. The smart material is bonded to the surface of the target structure, in this case a part inside an aircraft engine. Stress on the part ...

    SBIR Phase I 1998 Department of DefenseAir Force
  9. Hybrid Vibration Control Actuator Systems

    SBC: Active Control eXperts, Inc.            Topic: N/A

    Active Control eXperts, (ACX) Inc. proposes to design, fabricate, and demonstrate a novel hybrid vibration ccntrol actuator system capable of very precise, controllable motion. This system will combine the advantages of a capacitive actuator with feedback control capability. This system will possess the force and stroke characteristics of a small hydraulic device and the bandwidth of electric moto ...

    SBIR Phase I 1998 Department of DefenseMissile Defense Agency
  10. Smart, Adaptive Packages for Vibration Suppression

    SBC: Active Control eXperts, Inc.            Topic: N/A

    In many structures with vibration problems, the nature of the problem is uncertain, or varies over time. Thus it is not possible 'a priori to design a linear, time-invariant, (LTI) feedback control law which is guaranteed to meet performance, or possibly even stability requirements over the entire operating range. These applications require an intelligent control system which can adapt to the ch ...

    SBIR Phase I 1998 Department of DefenseAir Force
US Flag An Official Website of the United States Government