You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. SUPPORTED MOLTEN SALT CATALYSIS OF ENDOTHERMIC REACTION OF HIGH ENERGY-DENSITY AVIATION FUELS

    SBC: Accel Catalysis Inc.            Topic: N/A

    THE PROPOSED WORK INVOLVES APPLICATION OF SUPPORTED MOLTEN SALT CATALYSIS TO THE CATALYTIC ENDOTHERMIC DEHYDROGENATION OF HIGH ENERGY-DENSITY AVIATION FUELS. THE CATALYSTS OF INTEREST ARE HETEROGENEOUSLY DISPERSED PLATINUM AND NICKEL, TO BE USED ALONE OR IN BIMETALLIC CLUSTERS. THE MOLTEN SALTS TO BE USED INCLUDE BINARY AND TERNARY EUTECTICS INVOLVING ALKALI METAL CHLORIDES AND HYDROXIDES. THE SUP ...

    SBIR Phase I 1988 Department of DefenseAir Force
  2. SUPPORTED MOLTEN SALT DEHYDROGENTATION OF METHANOL

    SBC: Accel Catalysis Inc.            Topic: N/A

    N/A

    SBIR Phase I 1988 Department of DefenseAir Force
  3. Phased Array Ultrasonic Inspection of Fastener Holes in Two-Layer Structures

    SBC: ACOUSTIC IDEAS, INC.            Topic: N/A

    "Nondestructive inspection is a key component of programs aimed at extending the service life of aging aircraft. One important capability is the detection of cracking and corrosion around fastener holes. In thick, multiple layer structures, there is oftenno solution but removal of the fasteners for inspection, a costly and potentially damaging process. Phased array ultrasonics offer a novel and ...

    SBIR Phase II 2002 Department of DefenseAir Force
  4. Optimized Phased Array Hard Alpha Inclusion Detection in Castings

    SBC: ACOUSTIC IDEAS, INC.            Topic: N/A

    "Current manufacturing technology for cast titanium components cannot guarantee theabsence of hard alpha inclusions.Under the effect of fatigue, such inclusions become likely sites for structuralfailure. By performing nondestructive inspections on the manufactured parts usingphased array ultrasound, one can eliminate parts with the largest inclusions.Despite such quality control, undetected inclus ...

    SBIR Phase I 2002 Department of DefenseAir Force
  5. Seat/Bolster/Other

    SBC: ACTIVE SHOCK, INC.            Topic: N/A

    "A shock mitigating suspended seat which places the Special Forces Operator in an optimal ergonomic position will be developed for use in small Maritime Combatant Craft. It will feature an actively controlled shock absorber to optimize the suspension for abroad range of operator weights and sea states. In Phase I, a conceptual design of all the major components as well as the architecture for bo ...

    SBIR Phase I 2002 Department of DefenseSpecial Operations Command
  6. ONE-WAY DOPPLER MEASUREMENT

    SBC: ADCOM SYSTEMS TECHNOLOGY,INC.            Topic: N/A

    INNOVATIVE APPROACHES ARE DESCRIBED IN THIS PROPOSAL FOR SUPPRESSING FREQUENCY MODULATION ON A SINUSOIDAL CARRIER. PARTICULAR EMPHASIS IS DIRECTED TO THE SUPPRESSION OF IDENTIFIABLE COMPONENTS OF A COMPOSITE MODULATION PROCESS FOR THE PURPOSE OF RETAINING, FOR SEPARATE MEASUREMENT, ANY FORM OF RANGE-RATE DOPPLER SHIFT/MODULATION PRESENT. THE PROPOSED EFFORT WILL CONSIST OF AN ANALYTICAL STUDY FOR ...

    SBIR Phase I 1988 Department of DefenseArmy
  7. Strain Rate Effects in Ballistic Analyses of Bonded & Co-Cured Composite Structures

    SBC: ADTECH SYSTEMS RESEARCH INC            Topic: N/A

    "The aim of our Phase II activity is to incorporate the Cohesive Volumetric Plate and Shell (Finite) Elements into LS-DYNA3D, thus enhancing its capabilities in modeling HRAM loading and damage in composite structures. In Phase I, we reported oninterlaminar failure criteria and modes, based on fracture mechanics. A damage-dependent bilinear cohesive element is used to capture the crack initiatio ...

    SBIR Phase II 2002 Department of DefenseAir Force
  8. Computer-Aided Design Tools for Three-Dimensional Circuit Integration

    SBC: R3LOGIC, INC.            Topic: N/A

    "R3 Logic, Incorporated proposes to perform a comprehensive study to develop a fullsuite of computer-aided design tools for three-dimensional circuit integration. Thecompany will build on its existing tool set that enables 3-D physical layout andverification and will develop recommendations for extending these tools to permitanalyses of 3-D circuit performance, including thermal and electromagneti ...

    SBIR Phase I 2002 Department of DefenseDefense Advanced Research Projects Agency
  9. A High Resolution, Ultra High Frame Rate Visible Light Imager for High Speed Digital Photography

    SBC: R3LOGIC, INC.            Topic: N/A

    "3D-IC proposes to develop design specifications for a 12 megapixel 1000 frame / second digital output imager. The proposed design will be based on using a monolithic substrate for the photosensor array that is engineered to achieve high quantum efficiencyand good spectral response in visible light. The company proposes to investigate adaptation of its proprietary pixel-parallel processor core arc ...

    SBIR Phase I 2002 Department of DefenseArmy
  10. A High Resolution, Ultra High Frame Rate Visible Light Imager for High Speed Digital Photography

    SBC: R3LOGIC, INC.            Topic: N/A

    "R3 Logic, Incorporated proposes to develop a high-resolution, 12M-pixel 1000 frame / s imager to meet the Army's digital imaging needs for weapons test and evaluation. Through this program, R3 Logic will not only build and demonstrate a high-resolutionimager, but will formulate a new methodology for commercially viable fabrication of large-format focal plane arrays. Large focal plane digital imag ...

    SBIR Phase II 2002 Department of DefenseArmy
US Flag An Official Website of the United States Government