You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. SUPPORTED MOLTEN SALT CATALYSIS OF ENDOTHERMIC REACTION OF HIGH ENERGY-DENSITY AVIATION FUELS

    SBC: Accel Catalysis Inc.            Topic: N/A

    THE PROPOSED WORK INVOLVES APPLICATION OF SUPPORTED MOLTEN SALT CATALYSIS TO THE CATALYTIC ENDOTHERMIC DEHYDROGENATION OF HIGH ENERGY-DENSITY AVIATION FUELS. THE CATALYSTS OF INTEREST ARE HETEROGENEOUSLY DISPERSED PLATINUM AND NICKEL, TO BE USED ALONE OR IN BIMETALLIC CLUSTERS. THE MOLTEN SALTS TO BE USED INCLUDE BINARY AND TERNARY EUTECTICS INVOLVING ALKALI METAL CHLORIDES AND HYDROXIDES. THE SUP ...

    SBIR Phase I 1988 Department of DefenseAir Force
  2. SUPPORTED MOLTEN SALT DEHYDROGENTATION OF METHANOL

    SBC: Accel Catalysis Inc.            Topic: N/A

    N/A

    SBIR Phase I 1988 Department of DefenseAir Force
  3. Phased Array Ultrasonic Inspection of Fastener Holes in Two-Layer Structures

    SBC: ACOUSTIC IDEAS, INC.            Topic: N/A

    "Nondestructive inspection is a key component of programs aimed at extending the service life of aging aircraft. One important capability is the detection of cracking and corrosion around fastener holes. In thick, multiple layer structures, there is oftenno solution but removal of the fasteners for inspection, a costly and potentially damaging process. Phased array ultrasonics offer a novel and ...

    SBIR Phase II 2002 Department of DefenseAir Force
  4. Optimized Phased Array Hard Alpha Inclusion Detection in Castings

    SBC: ACOUSTIC IDEAS, INC.            Topic: N/A

    "Current manufacturing technology for cast titanium components cannot guarantee theabsence of hard alpha inclusions.Under the effect of fatigue, such inclusions become likely sites for structuralfailure. By performing nondestructive inspections on the manufactured parts usingphased array ultrasound, one can eliminate parts with the largest inclusions.Despite such quality control, undetected inclus ...

    SBIR Phase I 2002 Department of DefenseAir Force
  5. Electronically Shunted Smart Material Damper Packages for Extreme Environments

    SBC: Active Control eXperts, Inc.            Topic: N/A

    ACX proposes an alternate approach to damping for extreme environments, which uses an electrically shunted, surface mounted, smart material. This shunting approach has been most widely used in less extreme environments in conjunction with piezoceramic materials. The smart material is bonded to the surface of the target structure, in this case a part inside an aircraft engine. Stress on the part ...

    SBIR Phase I 1998 Department of DefenseAir Force
  6. Hybrid Vibration Control Actuator Systems

    SBC: Active Control eXperts, Inc.            Topic: N/A

    Active Control eXperts, (ACX) Inc. proposes to design, fabricate, and demonstrate a novel hybrid vibration ccntrol actuator system capable of very precise, controllable motion. This system will combine the advantages of a capacitive actuator with feedback control capability. This system will possess the force and stroke characteristics of a small hydraulic device and the bandwidth of electric moto ...

    SBIR Phase I 1998 Department of DefenseMissile Defense Agency
  7. Smart, Adaptive Packages for Vibration Suppression

    SBC: Active Control eXperts, Inc.            Topic: N/A

    In many structures with vibration problems, the nature of the problem is uncertain, or varies over time. Thus it is not possible 'a priori to design a linear, time-invariant, (LTI) feedback control law which is guaranteed to meet performance, or possibly even stability requirements over the entire operating range. These applications require an intelligent control system which can adapt to the ch ...

    SBIR Phase I 1998 Department of DefenseAir Force
  8. Seat/Bolster/Other

    SBC: ACTIVE SHOCK, INC.            Topic: N/A

    "A shock mitigating suspended seat which places the Special Forces Operator in an optimal ergonomic position will be developed for use in small Maritime Combatant Craft. It will feature an actively controlled shock absorber to optimize the suspension for abroad range of operator weights and sea states. In Phase I, a conceptual design of all the major components as well as the architecture for bo ...

    SBIR Phase I 2002 Department of DefenseSpecial Operations Command
  9. Non-Destructive Real-Time In-Situ Analysis of Vacuum Grown and Processed Infrared Material and Senso

    SBC: ADAM INSTRUMENT CO., INC.            Topic: N/A

    The objective of the proposed project is to develop innovative new analytical instrumentation and methodology capable of performing fully automated, non-destructive analysis of semiconductor sensor elements and arrays locate on three inch diameter wafers. The instrumentation would be capable of analyzing II-VI compounds and alloys, particularly HgCdTe. The methodology would employ state-of-the-a ...

    SBIR Phase II 1998 Department of DefenseArmy
  10. ONE-WAY DOPPLER MEASUREMENT

    SBC: ADCOM SYSTEMS TECHNOLOGY,INC.            Topic: N/A

    INNOVATIVE APPROACHES ARE DESCRIBED IN THIS PROPOSAL FOR SUPPRESSING FREQUENCY MODULATION ON A SINUSOIDAL CARRIER. PARTICULAR EMPHASIS IS DIRECTED TO THE SUPPRESSION OF IDENTIFIABLE COMPONENTS OF A COMPOSITE MODULATION PROCESS FOR THE PURPOSE OF RETAINING, FOR SEPARATE MEASUREMENT, ANY FORM OF RANGE-RATE DOPPLER SHIFT/MODULATION PRESENT. THE PROPOSED EFFORT WILL CONSIST OF AN ANALYTICAL STUDY FOR ...

    SBIR Phase I 1988 Department of DefenseArmy
US Flag An Official Website of the United States Government