Award Data

The U.S. Army's Joint Air to Ground Missile (JAGM) and the Air Force Small Diameter Bomb (SDB) are two potential candidates for insertion of multi-mode seeker missiles technology. Surmet has recently demonstrated proof-of-principle multilayer missile domes for these seekers. But technical challenges remain in scaling the processes to manufacturing level. The amount of touch labor, reproducibility ...

The Joint Services is seeking a miniaturized, low cost sensor for detection and identification of CWAs and TICs. To meet this requirement Block MEMS has very successfully completed a Phase I effort to develop a widely tunable MEMS enhanced Quantum Cascade Laser (QCL) spectrometer called LaserChemTM. LaserChemTM will have sensitivity in the parts per trillion, be under 1800 cm3 in size, have very l ...

The current use of polymer matrix composite materials aboard U.S. Navy ships has been limited to mainly exterior parts such as DDX topside structures, sonar bow domes, towed array fairings, diving planes, control surfaces and the prototype submarine sail dome for VA class submarines. There has been increasing interest in the development of composite materials for applications inside ships and sub ...

To provide low-cost, light-weight, cost-effective insulation system that combines an improved acoustic performance in excess of 40-60 dB with the required thermal, smoke, toxicity and fire barrier performance using mature coating technologies. Our team of acoustic and thermal experts will demonstrate in Phase II that our coating system will exceed the standard acoustic properties of transmission ...

In Phase I, we are examining materials that can be used to make tandem cells, with formulations that can be used on the process development coating machine. The goal is to demonstrate the feasibility of tandem modules with 6% efficiency. Phase II will begin mid-May 2008 with the goal of reproducible, 7% efficiency, tandem-cell module prototypes made on our coater/printer machines. These prototypes ...

Busek Co. Inc. is developing a Multi-Mode Orbit Maneuvering System (MMOMS) that can be added to ESPA ring, transforming it into a free-flying spacecraft that can deliver payloads to multiple orbits. In Phase I, we proved the feasibility of the concept and defined the architecture. The MMOMS has three sub-assemblies: The ESPA ring; the ESPA Propulsion Module (EPM), and the Power and Avionics Modu ...

Science Research Laboratory (SRL) proposes to develop an optically pumped high-efficiency, good-beam-quality vertical-external-cavity surface-emitting laser (VECSEL) that is scalable to multi-kilowatt power levels. Unlike the more conventional edge-emitting diode lasers, VECSELs are characterized by (1) a small gain-medium thickness (~1 micron) along the laser-propagation direction; (2) the potent ...

The objective of this Phase-II effort is to build and deliver a high-speed laser system for performing particle-image velocimetry (PIV) and planar laser-induced fluorescence (PLIF) of OH at rates of 5 to 10 kHz in augmentor test facilities. This state-of-the-art laser system will allow velocity and 2-D flame radical measurements for understanding the complex spatio-temporal development of instab ...

The objective of the Phase II Program is the successful development and demonstration of an airborne Sensor that simultaneously generates passive millimeter wave images of the terrain in all four Stokes Parameters. The Imaging Sensor will be the Baseline Configuration designed in Phase I. The performance capabilities of the Imager will be demonstrated in an airborne helicopter test. The flight tes ...

The application of reliable, long life electrical machinery in the All Electric Navy is critical for the success of future naval warfare. Development of a Pulse Width Modulated (PWM) inverter fed Permanent Magnet (PM) motor for the DD(X) shipboard propulsion illustrates future trends for large 20 MW, 2000 V, PWM Machines of 310 Tons. Challenges remain with regard to the insulation systems for t ...