You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. High Efficiency Single Photon Up-Conversion in Waveguides and Pump Wavelength Longer than the Signal Wavelength

    SBC: ADVR, Inc            Topic: N/A

    This NIST Phase 1 SBIR effort will demonstrate the feasibility of low noise single photon up conversion using KTiOPO4 (KTP) or LiNbO3 (LN) or Stoichiometric LiTaO3 (SLT) periodically poled waveguides and an 1800nm pump for a high efficiency single photon detector. The key innovation is using low noise periodically poled waveguides with a long wavelength (1800nm) pump leading to higher efficiency s ...

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  2. CVD Diamond Neutron Detectors with Pulse Shape Discrimination

    SBC: Radiation Monitoring Devices, Inc.            Topic: N/A

    Proliferation of nuclear weapons is a serious threat in the world today. One way to determine the presence of nuclear weapons is to detect neutrons emitted by special nuclear material(SNM) such as highly enriched uranium and weapons grade plutonium. The purpose of this project is to develop improved solid state neutron detectors from CVD diamond for homeland security applications. Phase I work wil ...

    SBIR Phase I 2008 Department of Homeland Security
  3. Improved Solid-State Neutron Detector

    SBC: Radiation Monitoring Devices, Inc.            Topic: HSB071009

    The use and applications of radiological sources, for power, medical, and defense applications, continuously increases with time. Illicit nuclear materials represent a threat for the safety of the American citizens and the detection and interdiction of a nuclear weapon is a national problem that has not been yet solved. This represents an enormous challenge to current detection methods and monitor ...

    SBIR Phase II 2008 Department of Homeland Security
  4. CHEMICAL SENSING ELECTRODES

    SBC: ANATRACE, INC.            Topic: N/A

    THE STUDY OF OCEAN PROCESSES SUCH AS MINERAL DISSOLUTION, ION SPECIATION AND REDOX EQUILIBRIA AS WELL AS EFFLUENT AND POLLUTION MONITORING REQUIRE ACCURATE AND PRECISE MEASUREMENTS OF BOTH MAJOR AND MINOR CHEMICAL CONSTITUENTS. ALTHOUGH SPECTROPHOTOMETRY AND FLAME PHOTOMETRY HAVE BEEN USED FOR SEA WATER ANALYSIS, POTENTIONMETRY WITH ION-SELECTIVE ELECTRODES IS THE MOST COMMON-METHODOLOGY, PARTICUL ...

    SBIR Phase II 1988 Department of Commerce
  5. Miniature MEMS-based Chemical & Explosives Detector

    SBC: BOSTON MICROSYSTEMS INC            Topic: N/A

    Boston MicroSystems (BMS) proposes to develop a cell-phone sized instrument for detecting hazardous chemical and explosive threats. The instrument is based on BMS' PicoSensor® chemical and explosives detection platform, which has been developed in part under DHS support and is capable of sensing explosives and toxic chemicals at ppb and even ppt (trillion) levels. The Picoensor® consists of a ME ...

    SBIR Phase I 2008 Department of Homeland Security
  6. High-Accuracy, AC Resistance-Ratio Bridge

    SBC: Circuit Equipment Corporation            Topic: N/A

    This SBIR deals with developing a commercial AC Resistance-Ratio Bridge based on research work done by R. D. Cutkosky at NIST during the 1980's. His initial work will be extended by this Phase 1 project to allow for a new state-of-the-art product design and development. The product, the Model 8686 Precision Resistance-Ratio Bridge, will have an operating current range from 0.1mA to 10mA user selec ...

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  7. Non-Contact Trace Explosives Sampling and Preconcentration for Vehicle Borne Improvised Explosive Device Detection

    SBC: EXCELLIMS CORPORATION            Topic: N/A

    Ion mobility spectrometer based explosives trace detectors (ETD) have been widely used in airport check points, ports of entry, government buildings, and other high security facilities. Most of these systems require manual collection of trace particles from vehicles via direct swabbing of surface areas of interest. Sample collection efficiency and inconsistency pose significant challenges to the e ...

    SBIR Phase I 2008 Department of Homeland Security
  8. A Miniatruized Carbon Dioxide Detector

    SBC: Giner, Inc.            Topic: 819S

    NOAA supports over 25,000 underwater dive programs per year. To increase the duration and depth of these dives, the use of closed circuit mixed gas rebreathers (CCRs) is being considered. As there currently are no sensors to detect CO2 levels in the breathing gas, Giner, Inc. proposes to develop an electrochemical CO2 sensor for CCR use. The technical innovation will be to develop a reversible ...

    SBIR Phase I 2008 Department of Commerce
  9. Smart Sensing and Tracking with Video and Mote Sensor Collaboration

    SBC: INTUVISION            Topic: N/A

    Automatic extraction of actionable intelligence from collaborative sensors in a framework that supports seamless exchange of extracted information across sensor layers while leveraging the human in the loop is the focus our proposal. Depending upon the specific end-user, data extracted from the battlefield areas represent two major categories: information requiring and subject to further analyses, ...

    SBIR Phase I 2008 Department of Homeland Security
  10. Optimized Soft Magnetic Electrodes for Ultra-Sensitive Magnetic Tunnel Junction Field Sensors

    SBC: Micro Magnetics, Inc.            Topic: N/A

    This SBIR project aims to develop a new class of low-field magnetic sensors based on magnetic tunnel junctions with magnesium oxide (MgO) tunnel barriers. The phase 1 effort aims to maximize the high-frequency sensitivity of the MgO-MTJ sensor devices by optimizing the magnetic characteristics of the free electrode. By using new and novel combinations of magnetic materials, in conjunction with pro ...

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government