List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Bearingless Disposable Centrifugal Blood Pump

    SBC: ABIOMED, INC.            Topic: N/A

    A bearingless disposable centrifugal blood pump will be developed in this project, together with ainexpensive driver and controller. The rotor of the pump will be suspended by a combination of magnethat it is washed on all surfaces by moving blood. The elimination of bearings and shaft seals removheating and blood stagnation, making such a pump safer and more reliable for short to medium term usp ...

    SBIR Phase II 1997 Department of Health and Human Services
  2. Laparoscopic Enterocystoplasty with Laser Welding

    SBC: ABIOMED, INC.            Topic: N/A

    Our objective is to develop a laser welding technique for applications in urologic anastomotic repalaparoscopic procedures in which conventional suturing techniques are difficult. The project is desistrength of welds in a bladder augmentation procedure (enterocystoplasty) under feedback controlledmode to achieve desired preset surface temperature of the tissue favorable to reproducible weld intewi ...

    SBIR Phase II 1997 Department of Health and Human Services
  3. CONTROL SYSTEM FOR ROTARY BIVENTRICULAR ASSIST IMPLANT

    SBC: ABIOMED, INC.            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of Health and Human Services
  4. ANTITHROMBOTIC TISSUE SOLDER FOR MICROVASCULAR REPAIRS

    SBC: ABIOMED, INC.            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of Health and Human Services
  5. SBIR Phase I: AIDE: The Data Analyst's Assistant

    SBC: Acsiom Labs Inc.            Topic: N/A

    N/A

    SBIR Phase I 1997 National Science Foundation
  6. SBIR Phase I: Three Dimensional Volumetric Image Display = A New Computer Display for Information Visualization

    SBC: ACT Research Corporation            Topic: N/A

    N/A

    SBIR Phase I 1997 National Science Foundation
  7. Manufacturing Methods for Sulfur Concrete Sewer Pipe

    SBC: Brimstone Pipe Company            Topic: N/A

    This Phase I research is intended to evaluate the feasibility of manufacturing low-cost, acid-resistant sanitary sewer pipe from sulfur concrete. Sulfur is an abundant mineral recovered from coking, natural gas processing, and petroleum refining. Secondary recovery of sulfur, resulting from environmental regulation, produces more material than is needed by U.S. industry. The U.S. Bureau of Mines ...

    SBIR Phase I 1997 Environmental Protection Agency
  8. Buffet Control of the F-22 Using an Enhanced Distributed Actuation System

    SBC: Active Control eXperts, Inc.            Topic: N/A

    Unsteady buffet forces excite the vertical tails of aircraft flying at high angles of attack and cause excessive stress and vibration in the tail structure. This results in increased fatigue which ultimately reduces aircraft life. It has been shown by ACX that distributed piezoceramics can significantly reduce the buffet loads on the tail structure of an F/A-18. ACX proposes to develop a simila ...

    SBIR Phase I 1997 Department of DefenseAir Force
  9. Damage Detection in Thick Walled Composites Using Surface Mounted Piezoelectric Elements

    SBC: Active Control eXperts, Inc.            Topic: N/A

    Herein ACX proposes a damage detection system based on ACX's QuickPack+ technology to combine piezoelectric actuators and sensors in a robust, easily mounted transducer package. The QuickPack encapsulates a piezoceramic with insulating flex circuit material and a simple connector. The transducer package will be bonded via a low-melting-point thermoplastic adhesive to ensure removability. The t ...

    SBIR Phase II 1997 Department of DefenseArmy
  10. High Performance Piezoceramic Coatings for Ultrasound Applications

    SBC: Active Control eXperts, Inc.            Topic: N/A

    ACX proposes an innovative new process for the manufacture of smart structures using a High Velocity Oxy-Fuel (HVOF) thermal spray process. This simple, multi-step process will be capable of depositing electroded piezoceramic coatings. The coatings will be poled while still hot, reducing poling times and voltages while increasing poling efficiency. Process times will be extremely short. The pr ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government