You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Critical Components/Enabling Technologies for High-gradient Particle Accelerators

    SBC: Alameda Applied Sciences Corporation            Topic: DTRA092008

    In this SBIR solicitation, critical technology is sought that will enable construction of accelerator systems that are operable from moving military platforms or that will significantly reduce the overall footprint of currently available technology. Alameda Applied Sciences Corporation (AASC) offers to develop one key enabling technology of a Laser Wakefield Accelerator (LWFA), that holds promise ...

    SBIR Phase I 2010 Department of DefenseDefense Threat Reduction Agency
  2. A Novel Cost Effective Method for Growing High Performance Radiation Sensors

    SBC: Radiation Monitoring Devices, Inc.            Topic: DTRA082007

    Certain lanthanide halides have significantly higher light output than NaI:Tl, the comparison standard for scintillators, plus other important properties, including fast decay times and excellent proportionality. Unfortunately, lanthanide halides grown by traditional melt processes have high production costs and limited availability. Crystals are usually limited to about 5 cm x 5 cm, right cylinde ...

    SBIR Phase II 2010 Department of DefenseDefense Threat Reduction Agency
  3. Electromagnetically-Stirred THM Process for Growth of CZT

    SBC: CAPESYM, INC            Topic: DTRA092007

    It is proposed to develop a novel process for growth of high quality CZT crystals for nuclear detection applications. Currently the THM process is the technology of choice for production of high quality CZT crystals. This process, however, suffers from extremely low growth rates. The development effort proposed here will seek to increase the crystal growth rate by 5-10 times the current levels ...

    SBIR Phase I 2010 Department of DefenseDefense Threat Reduction Agency
  4. Digital Data Recorder for Gauges in High Speed Weapons During Survivability Testing

    SBC: Diversified Technical Systems, Inc.            Topic: DTRA092014

    The ability to collect data for conventional munitions in conditions of increasing acceleration and duration for hard target penetration is needed. Survivability and functionality of an electronic data recorder exposed to these acceleration levels (up 120,000 g) and shock loads is necessary as a result of higher velocity weapons and the use of precursor shape charge warheads to soften the target ...

    SBIR Phase I 2010 Department of DefenseDefense Threat Reduction Agency
  5. Cost-Effective Gas Flow Data Sensors

    SBC: Exquadrum, Inc.            Topic: DTRA08007

    Current high energy, multi-room test facilities operated in support of Defense Threat Reduction Agency (DTRA) efforts suffer from a lack of robust sensors that can provide a cost-effective approach to obtaining dynamic pressure induced gas flows during internal detonations events. Exquadrum, Inc proposes a new sensor package that utilizes existing piezoelectric sensor technologies, but incorporat ...

    SBIR Phase II 2010 Department of DefenseDefense Threat Reduction Agency
  6. SYSEME/HSI™: Software and Systems Engineering Methodology for Human System Integration

    SBC: INTELLIGENT SYSTEMS TECHNOLOGY, INC.            Topic: DTRA101001

    While current Software and Systems Engineering (SSE) methodologies provide a viable means for technically trained professionals to address HSI concerns throughout the system lifecycle, they tend to be inadequate for non-technical users. To overcome this limitation, the proposed effort is concerned with developing and integrating a set of HSI templates with an existing SSE tool and thereby refining ...

    SBIR Phase I 2010 Department of DefenseDefense Threat Reduction Agency
  7. High-gradient transportable laser accelerator for high duty cycle applications

    SBC: Radiabeam Technologies, LLC            Topic: DTRA092008

    The Inverse Free Electron Laser (IFEL) is a leading contender to demonstrate high gradient, high repetition rate laser acceleration for the next generation of small footprint, high energy (>200 MeV) accelerators for military applications. In the IFEL energy is transferred from a high power laser to an electron beam as they co-propagate through a magnetic undulator. The rapid development of laser t ...

    SBIR Phase I 2010 Department of DefenseDefense Threat Reduction Agency
  8. The Characterization and Mitigation of Radiation Effects on Nano-technology Microelectronics

    SBC: ROBUST CHIP INC.            Topic: DTRA082001

    Robust Chip Inc. (RCI) and Stanford University (Stanford – subcontractor) propose a project with two main parts: 1. Development of a unique new layout and circuit design methodology for complete protections against both single and multiple single event errors with a minimal circuit and layout overhead. 2. Development, and integration with fundamental design flow technology (physical design and v ...

    SBIR Phase II 2010 Department of DefenseDefense Threat Reduction Agency
  9. Next Generation in Detection Materials Processing

    SBC: Neotron Inc            Topic: DTRA092007

    Three nuclides are especially useful in detecting thermalized neutrons: helium-3, lithium-6 , and boron-10. Since current demand will deplete reserves of helium-3 in roughly two years, there is a large desire to develop detectors that have the capacity to replace helium-3 tubes. In this proposal we spell out our plan to adapt Neotron''s already developed fission neutron detector into a high effic ...

    SBIR Phase I 2010 Department of DefenseDefense Threat Reduction Agency
  10. Predicting Ultra High-Performance Concrete (UHPC) Residual Strength after Multiple Penetrations and Blasts

    SBC: Karagozian & Case, Inc.            Topic: DTRA092013

    The problems addressed by this proposal are related to the need for fast running models (FRMs) that predict damage imparted to structural components composed of UHPC materials, particularly slabs, by munitions related to their penetration and detonation. These FRMs are also to provide the resulting residual capacity of the component and account for the effects of multiple strikes. The FRMs need ...

    SBIR Phase I 2010 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government