You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Megapixel Uncooled Photomechanical LWIR Imager

    SBC: AGILTRON, INC.            Topic: SOCOM07005

    This Phase II technology pursuit is a follow-on research and development effort to USSOCOM’s Phase I SBIR Contract No. H92222-07-P-0051. As the result of this follow-on Phase II effort, Agiltron shall provide and demonstrate two (2) very high resolution, low power and low cost imagers that collect long wave infrared (LWIR) radiation and that produce imagery of a target object. BENEFITS: The Gove ...

    SBIR Phase II 2010 Department of DefenseSpecial Operations Command
  2. High Speed and High Sensitivity Quadrant Photo Detector

    SBC: Radiation Monitoring Devices, Inc.            Topic: N/A

    To further advance the characterization and utility of microcantilevers, next generation optical detectors with higher frequency response, improved displacement resolution and lower noise for weak signal detection are needed. Consequently, Radiation Monitoring Devices, Inc. (RMD) will develop a turnkey optical detector module for use in characterizing the displacement and resonant frequencies of m ...

    SBIR Phase I 2010 Department of CommerceNational Institute of Standards and Technology
  3. Registration of EO and LIDAR using an Interoperability Architecture for Net-Centric Environments (RELIANCE)

    SBC: Charles River Analytics, Inc.            Topic: SOCOM09003

    Currently deployed full motion video (FMV) sensors provide crucial real-time situational awareness, but suffer from limited field of view and lack of geographical context. Charles River proposes a system to augment current FMV displays with geographic information and real-time intelligence overlays to provide users with a better understanding of video content in the context of the battlefield. In ...

    SBIR Phase II 2010 Department of DefenseSpecial Operations Command
  4. 3-D Epoxy Printed Fabrics (Woven, Knits, Stretch Knits) for Integrated Sharp Object Protection for Dive Suit or Dive Skin Garment and Body Mapped Prot

    SBC: EY TECHNOLOGIES            Topic: SOCOM10001

    EY Technologies (EYT) proposes to accomplish three key objectives in this effort: 1) Generate 3-D Epoxy Printed Fabric Surfaces for Integrated Dive-Suit Sharp Object Protection. 2) Generate 3-D Epoxy Printed Knit Fabrics for Dive-Skin Garment for Sharp Object Protection 3) Body Mapped Sharp Object Protection Dive-Suit Design EYT has partnered with Polartec®, HDM, WhitesDiving to address the lack ...

    SBIR Phase I 2010 Department of DefenseSpecial Operations Command
  5. Development of a Novel Highly-Efficient Nanofiber-based CO2 Absorbing Material

    SBC: Nano Terra, Inc.            Topic: SOCOM10002

    Nano Terra proposes the design and development of nanofiber-based CO2 absorbing materials which will increase the sorbent capacity while decreasing breathing resistance and increasing the rate of CO2 absorption. Metal oxide nanofibers capable of absorbing CO2 will be fabricated using electrospinning, in a technique pioneered by Nano Terra’s scientists. The CO2 absorbing capacity of the fibers wi ...

    SBIR Phase I 2010 Department of DefenseSpecial Operations Command
  6. Compact, Covert Periscope with 360 Degree Simultaneous Day/Night Coverage

    SBC: REMOTEREALITY CORP.            Topic: SOCOM10003

    RemoteReality proposes to design and develop a very high resolution, omnidirectional compact 360 degree periscope based on RemoteReality''s unique optical designs and very high resolution imagers with embedded processing. Employing a combination of RemoteReality’s catadioptric cameras with a rotating mirror in a pressure housing with a wide spectral band zoom lenses and fixed LLLTV and SWIR came ...

    SBIR Phase I 2010 Department of DefenseSpecial Operations Command
  7. Sensor Systems for Complete Residential Energy Monitoring

    SBC: TIAX LLC            Topic: N/A

    In Phase 1, TIAX developed and demonstrated a residential energy monitoring system (R-EMS) with potential national energy savings of $20 billion annually. Based on user requirements and well-established systems engineering methodology, TIAX’s R-EMS solution is inexpensive, easy to install and operate, and is supportive of intuitive decision making about energy usage. In Phase 2, TIAX will extend ...

    SBIR Phase II 2010 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government