You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Megapixel Uncooled Photomechanical LWIR Imager

    SBC: AGILTRON, INC.            Topic: SOCOM07005

    This Phase II technology pursuit is a follow-on research and development effort to USSOCOM’s Phase I SBIR Contract No. H92222-07-P-0051. As the result of this follow-on Phase II effort, Agiltron shall provide and demonstrate two (2) very high resolution, low power and low cost imagers that collect long wave infrared (LWIR) radiation and that produce imagery of a target object. BENEFITS: The Gove ...

    SBIR Phase II 2010 Department of DefenseSpecial Operations Command
  2. CZT Substrates for Improved MCT Detector Performance

    SBC: CAPESYM, INC            Topic: MDA09022

    The work proposed here seeks to produce CZT substrates with superior qualities aimed at improving the performance of MCT detectors used in infrared detectors. The proposed work promises to overcome one of the major causes of dislocation formation in MCT structures.

    SBIR Phase I 2010 Department of DefenseMissile Defense Agency
  3. Growth of Large Area CZT Crystals

    SBC: CAPESYM, INC            Topic: MDA08013

    The goal of this program is to produce large area Cadmium Zinc Telluride (CZT) substrates for growth of Mercury Cadmium Telluride (MCT) films for application in IR Focal Plane Arrays. Two growth processes will be pursued in this program. The grown CZT crystals will be processed into substrates. MCT films will be grown on these substrates and their properties will be characterized.

    SBIR Phase II 2010 Department of DefenseMissile Defense Agency
  4. Simulation Optimization Engine (SIMON II) for Missile Defense

    SBC: Charles River Analytics, Inc.            Topic: MDA08036

    Missile defense remains a crucial component for protecting the United States and her allies from potential long-range threats. Modeling and simulation (M&S) is recognized by the Missile Defense Agency as a key enabling technology supporting Warfighters and analysts in ballistic missile defense system (BMDS) design, testing, performance assessment, training, wargaming, and system acquisition. The u ...

    SBIR Phase II 2010 Department of DefenseMissile Defense Agency
  5. Registration of EO and LIDAR using an Interoperability Architecture for Net-Centric Environments (RELIANCE)

    SBC: Charles River Analytics, Inc.            Topic: SOCOM09003

    Currently deployed full motion video (FMV) sensors provide crucial real-time situational awareness, but suffer from limited field of view and lack of geographical context. Charles River proposes a system to augment current FMV displays with geographic information and real-time intelligence overlays to provide users with a better understanding of video content in the context of the battlefield. In ...

    SBIR Phase II 2010 Department of DefenseSpecial Operations Command
  6. 3-D Epoxy Printed Fabrics (Woven, Knits, Stretch Knits) for Integrated Sharp Object Protection for Dive Suit or Dive Skin Garment and Body Mapped Prot

    SBC: EY TECHNOLOGIES            Topic: SOCOM10001

    EY Technologies (EYT) proposes to accomplish three key objectives in this effort: 1) Generate 3-D Epoxy Printed Fabric Surfaces for Integrated Dive-Suit Sharp Object Protection. 2) Generate 3-D Epoxy Printed Knit Fabrics for Dive-Skin Garment for Sharp Object Protection 3) Body Mapped Sharp Object Protection Dive-Suit Design EYT has partnered with Polartec®, HDM, WhitesDiving to address the lack ...

    SBIR Phase I 2010 Department of DefenseSpecial Operations Command
  7. Development of a Novel Highly-Efficient Nanofiber-based CO2 Absorbing Material

    SBC: Nano Terra, Inc.            Topic: SOCOM10002

    Nano Terra proposes the design and development of nanofiber-based CO2 absorbing materials which will increase the sorbent capacity while decreasing breathing resistance and increasing the rate of CO2 absorption. Metal oxide nanofibers capable of absorbing CO2 will be fabricated using electrospinning, in a technique pioneered by Nano Terra’s scientists. The CO2 absorbing capacity of the fibers wi ...

    SBIR Phase I 2010 Department of DefenseSpecial Operations Command
  8. Compact Dual-mode Laser for LADAR

    SBC: JGM ASSOCIATES, INC.            Topic: MDA09002

    A compact "dual-mode" 1-micron laser source will be developed that can be switched "on the fly" between a high-pulse-rate, lower-energy emission mode and a lower-pulse-rate, high-energy emission mode. Pulse duration will be less than 10 ns and beam quality will be near-diffraction-limited.

    SBIR Phase I 2010 Department of DefenseMissile Defense Agency
  9. Development of High Performance AlInN-Based HEMTs

    SBC: Kopin Corporation            Topic: MDA08024

    The AlInN alloy lattice matched to GaN is predicted to improve the performance and reliability of GaN-based high electron mobility transistors (HEMTs) and monolithic microwave integrated circuits for military and commercial applications. High power and high frequency operation, along with high reliability, radiation and ESD resistance, are expected in discrete devices and integrated systems emplo ...

    SBIR Phase II 2010 Department of DefenseMissile Defense Agency
  10. SATT (Smart Anti-Tamper Technologies)

    SBC: Mide Technology Corporation            Topic: MDA08043

    The protection of CPI from unwanted transfer is necessary to ensure a tactical advantage over our adversaries. Various powered sensor response techniques have been developed for AT systems. These systems require a means to be constantly powered for long periods of time. A downed or stored weapon system may need protection for many years removed from a primary power source. Energy storage technol ...

    SBIR Phase II 2010 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government