You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Megapixel Uncooled Photomechanical LWIR Imager

    SBC: AGILTRON, INC.            Topic: SOCOM07005

    This Phase II technology pursuit is a follow-on research and development effort to USSOCOM’s Phase I SBIR Contract No. H92222-07-P-0051. As the result of this follow-on Phase II effort, Agiltron shall provide and demonstrate two (2) very high resolution, low power and low cost imagers that collect long wave infrared (LWIR) radiation and that produce imagery of a target object. BENEFITS: The Gove ...

    SBIR Phase II 2010 Department of DefenseSpecial Operations Command
  2. Registration of EO and LIDAR using an Interoperability Architecture for Net-Centric Environments (RELIANCE)

    SBC: Charles River Analytics, Inc.            Topic: SOCOM09003

    Currently deployed full motion video (FMV) sensors provide crucial real-time situational awareness, but suffer from limited field of view and lack of geographical context. Charles River proposes a system to augment current FMV displays with geographic information and real-time intelligence overlays to provide users with a better understanding of video content in the context of the battlefield. In ...

    SBIR Phase II 2010 Department of DefenseSpecial Operations Command
  3. 3-D Epoxy Printed Fabrics (Woven, Knits, Stretch Knits) for Integrated Sharp Object Protection for Dive Suit or Dive Skin Garment and Body Mapped Prot

    SBC: EY TECHNOLOGIES            Topic: SOCOM10001

    EY Technologies (EYT) proposes to accomplish three key objectives in this effort: 1) Generate 3-D Epoxy Printed Fabric Surfaces for Integrated Dive-Suit Sharp Object Protection. 2) Generate 3-D Epoxy Printed Knit Fabrics for Dive-Skin Garment for Sharp Object Protection 3) Body Mapped Sharp Object Protection Dive-Suit Design EYT has partnered with Polartec®, HDM, WhitesDiving to address the lack ...

    SBIR Phase I 2010 Department of DefenseSpecial Operations Command
  4. Development of a Novel Highly-Efficient Nanofiber-based CO2 Absorbing Material

    SBC: Nano Terra, Inc.            Topic: SOCOM10002

    Nano Terra proposes the design and development of nanofiber-based CO2 absorbing materials which will increase the sorbent capacity while decreasing breathing resistance and increasing the rate of CO2 absorption. Metal oxide nanofibers capable of absorbing CO2 will be fabricated using electrospinning, in a technique pioneered by Nano Terra’s scientists. The CO2 absorbing capacity of the fibers wi ...

    SBIR Phase I 2010 Department of DefenseSpecial Operations Command
  5. Compact, Covert Periscope with 360 Degree Simultaneous Day/Night Coverage

    SBC: REMOTEREALITY CORP.            Topic: SOCOM10003

    RemoteReality proposes to design and develop a very high resolution, omnidirectional compact 360 degree periscope based on RemoteReality''s unique optical designs and very high resolution imagers with embedded processing. Employing a combination of RemoteReality’s catadioptric cameras with a rotating mirror in a pressure housing with a wide spectral band zoom lenses and fixed LLLTV and SWIR came ...

    SBIR Phase I 2010 Department of DefenseSpecial Operations Command
  6. Intelligent Flexible Fixturing System

    SBC: ACT Research Corporation            Topic: N/A

    Two approaches are proposed to attack the problems of fixturing process. First, a novel hardware holding system, Dexterous Vise, is proposed. Functionally, a single Dexterous Vise is capable of revealing four faces of the clamped workpiece to the cutting tool without re-fixturing, which actually increases one degree of freedom to the machine tool. A pair of Dexterous Vises, the "Dual-Vise", ena ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  7. Demonstration of Capacitors, Inductors, and Switches for Cryogenic Power Converters

    SBC: Cryo Energy Systems, Inc.            Topic: N/A

    In order to realize the full potential of cryogenic power converters, it is vital to develop the technology for cryogenic capacitors and inductors, in order to be combined with the switching semiconductors. Capacitors with high dielectric constant and high voltage withstand at cryogenic temperatures with low weight and volume lie on the critical path. The proposed work focuses on innovative tech ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  8. Hydrogen Supply System for Small PEM Fuel Cell Stacks

    SBC: ANALYTIC POWER LLC            Topic: N/A

    To Operate effectively, PEM small fuel cells stacks need a chemical hydride hydrogen generator. The chemical hydride digital reactor suggested in the proposed program will provide about 2.5 kWH of energy in a5 pound package.--almost three times the energy density of a BA5590 battery. Studies and experiments will be conducted with spe ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  9. High Efficiency Cryogenic Power Conversion

    SBC: AMERICAN SUPERCONDUCTOR CORPORATION            Topic: N/A

    Proposed is the technical development and design of the electronics and cooling systems for a 1 megawatt cryogenically cooled inverter suitable for use in a wide range of applications, including Uninterruptable Power Suplies (UPS) and motors in the +1000 HP range. The proposed work will provide a logical progression to the development that has already been done by American Superconductor Corp. I ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  10. A Five Volt Lithium Battery

    SBC: COVALENT ASSOC., INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government