List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Helicopter Remote Manipulation of External Slingloads (HERMES)

    SBC: Advanced Optical Systems, Inc            Topic: A05057

    Helicopter operations in low visibility conditions and sling load operations continue to add risk to aviation operations. If slingloads could be picked up without the need for a ground crew, lives could be saved. In addition, a sensor that can detect the location of a load would help in low visibility conditions. We propose to develop such a system. It will include the mechanical structures ne ...

    SBIR Phase II 2006 Department of DefenseArmy
  2. Development of an Ultra-Fast Optical Beam Scanner for Tactical Laser Radar (LADAR) Seeker

    SBC: AEGIS TECHNOLOGIES GROUP, INC., THE            Topic: A05142

    Optical scanners are used to control the position of a light beam in one or more orthogonal spatial dimensions. There is a strong need to develop seeker with increased ability to track and engage multiple fleeting targets at increased range. Optomechanical scanners and scanners based on liquid crystals (LC) can effectively scan laser beams but they have limited scanning speeds. voltage, optical ...

    SBIR Phase I 2006 Department of DefenseArmy
  3. Reducing Complex Physico-Chemical Model System

    SBC: Aerodyne Research, Inc.            Topic: A05T018

    High-Dimensional Model Representation (HDMR) is a technique for efficiently representing the input/output behavior of a complex system. HDMR is a useful tool for scientists and engineers in two common circumstances. The first is when a computationally-exp

    STTR Phase II 2006 Department of DefenseArmy
  4. Miniature Generator Power for Advanced Prostheses

    SBC: Aerodyne Research, Inc.            Topic: A06T031

    The capabilities of current prostheses are substantially limited by the lack of suitable high energy density portable power. Specifically, current myoelectric prostheses utilize rechargeable batteries, which provide typically less than 10% of the daily energy required for typical activities of daily living. Such limitations in the energy source significantly limit the utility of these prostheses ...

    STTR Phase I 2006 Department of DefenseArmy
  5. Alternative Power Source for Small Unmanned Ground Vehicles

    SBC: Aerodyne Research, Inc.            Topic: A06218

    Current small robotic platforms, or small unmanned ground vehicles (SUGV's), are facing increased mission requirements. The power supply capability of these SUGV's is frequently the limiting factor in the ability to meet the increased demands of additional electronics and sensors, and longer missions. A higher volumetric energy density alternative power source (APS) is needed to provide addition ...

    SBIR Phase I 2006 Department of DefenseArmy
  6. High Performance and Low Cost Sniper Riflescope Detection Lidar

    SBC: AGILTRON, INC.            Topic: A05006

    Based on our recent progress in a proprietary Dual Source Enemy Identification and Negation Lidar (DSEINL) technology and successful Phase I feasibility demonstration, Agiltron Inc. proposes to develop a revolutionary approach to DSEINL for providing wide field of view and high detection rate to find and identify enemy combatants and sniper rifles by receiving the back or retro-reflected light fr ...

    SBIR Phase II 2006 Department of DefenseArmy
  7. Visible Wavelength Negative Index Materials

    SBC: AGILTRON, INC.            Topic: A05T015

    Recent development in negative index materials has triggered great interest in imaging through a flat lens, and perhaps even ¡ superlensing¡": exceeding the classical diffraction limit by capturing both evanescent and propagating wave components. Though d

    STTR Phase II 2006 Department of DefenseArmy
  8. Nano-Enabled Sampling for SERS-Based Trace Explosive Detection

    SBC: AGILTRON, INC.            Topic: A05092

    In Phase I, Agiltron has successfully demonstrated the feasibility of the proposed Surface-enhanced Raman Scattering sampling chip and cell design utilizing a permeable/porous polymer matrix embedded with multi-layered gold nano-particles. The approach leverages the leading-edge micro-optical component development and manufacturing technology of Agiltron and extensive experience in nano-material e ...

    SBIR Phase II 2006 Department of DefenseArmy
  9. A Novel low-noise, fast-tuning, wideband Tuner based on Tunable Opto-Electronic Oscillator

    SBC: AGILTRON, INC.            Topic: A06103

    Leveraging Agiltron’s recent breakthrough in manufacturing low cost fiber optic digital delay lines and variable optical attenuators as well as the drastic improvement in cost and performance of commercial optical components, and the leadership of M/A-COM in the ELINT tuner, we propose to develop a low-noise, fast-tuning, wideband tuner based on opto-electronic oscillator and photonic tunable hi ...

    SBIR Phase I 2006 Department of DefenseArmy
  10. Control of Dislocations for Improved IR Sensors

    SBC: AGILTRON, INC.            Topic: A06T021

    ???

    STTR Phase I 2006 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government