Award Data

Ozone is arguably the most important trace gas in the atmosphere, and improved monitoring of ozone throughout the atmosphere is essential. This Phase 2 project continues the development of a complete, automated system for measuring ozone from on board commercial aircraft. There is already one program within NOAA, CAAMP (Commercial Aircraft Atmospheric Measurement Program), for measuring a variety ...

In our Phase 1 work we were able to replicate and build on recent results at NIST with superconducting transition (SCT) thermometers, which suggested that dramatic improvements may be achieved in detectivity and range of application, of cryogenic electrical substitution radiometers. Cryo-ESR's are widely used as the most accurate absolute standards of radiative flux and irradiance. In Phase 2, we ...

Lidar systems offer considerable promise for the acquisition of a variety of atmospheric variables with very high spatial and temporal resolution from airborne platforms. Ground-based lidar systems have been demonstrated that measure aerosols, water vapor, and ozone, and airborne windsensing lidar have been flown on several military aircraft. The growing number of commercial airliners, however, of ...

N/A

The objective of this research project is the development of an Autonomous Microbial Sampler (AMS) that will obtain uncontaminated and exogenous DNA-free microbial samples from deep-sea hydrothermal vents and other aquatic ecosystems. Sampling with the AMS may be conducted using manned submersibles, Remotely Operated Vehicles (ROV), Autonomous Underwater Vehicles (AUV) or during hydrocast operatio ...

N/A

N/A

N/A

In most critical software systems, a state that is partially visible through values passed across interfaces contains information that could determine the health of the software system, and whether a failure is likely in the future. Some of this information behaves in a continuous fashion, e.g., the available memory or disk space is easily interpreted to monitor system health. Other values are nom ...

Leveraging Agiltron’s industrial leading developments for optical measurement of motion in MEMS devices, we propose to use electro-optical sensors for measuring the displacement and gap in the NIST micro-rheometer. No electrical connections are required to the moving parts. All electronics and optics are removed from the chip so that it is inexpensive and disposable. A fixed, simple micro-fluidi ...