Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. A Portable Electronic Composite Track Loading Fixture

    SBC: Advanced Technologies Group, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1998 Department of Transportation
  2. Highway Capacity Software in Portable Graphical User Interface (GUI) Format

    SBC: Catalina Engineering, Inc.            Topic: N/A

    The Highway Capacity Software (HCS) has, for the past 10 years, been the principal tool for applying the analysis methods of the Highway Capacity Manual (HCM). The HCS has been DOS-based with a very limited user interface. With a number of new research materials being produced, and an approved plan in place which leads to publication of an HCM 2000 and accompanying software, there is a strong op ...

    SBIR Phase II 1998 Department of Transportation
  3. Response-Based Parameter Estimation for Determining Unknown Bridge Foundations

    SBC: Infrasense, Inc.            Topic: N/A

    Evaluation of bridges for vulnerability to scour or other potential sources of damage requires knowledge of foundation conditions beneath piers and abutments that are often unknown. INFRASENSE proposed to develop and demonstrate a response-based parameter estimation method (RPEM) which will address the need for a simple, low-cost system for unknown foundation evaluation. The RPEM system is based ...

    SBIR Phase II 1998 Department of Transportation
  4. Automated Production of Composite Energy Absorbing Utility Poles

    SBC: KaZaK Composites Incorporated            Topic: N/A

    KaZaK Composites, Kaman Sciences and Dr. Malcolm Ray of the University of Iowa propose to investigate the design of energy absorbing utility poles made from composite materials. This team has considerable experience in the multiple technologies needed to successfully complete the proposed program, including design of high performance composite products for automated production and design, analysi ...

    SBIR Phase II 1998 Department of Transportation
  5. Automatic Vehicle Body Classification Using High-Resolution Laser RADAR

    SBC: Schwartz Electro-Optics, Inc            Topic: N/A

    N/A

    SBIR Phase I 1998 Department of Transportation
  6. A Temporally Resolved Thermal Imager

    SBC: A2Z TECHNOLOGIES CORP.            Topic: N/A

    There is a need for a robust, non-invasive system for the measurement and recording of single-event (non-repetitive) time-dependent high temperatures. Measurement periods for these applications can range from microseconds to several hundred milliseconds. Individual measurements must be made on the order of every microsecond or more frequent. A2Z Technologies Corporation proposes to design and de ...

    SBIR Phase I 1998 Department of DefenseNavy
  7. Augmenting CORBA with High Assurance Data Integrity Mechanisms

    SBC: ADVANCED SYSTEMS & TECHNOLOGIES INC            Topic: N/A

    The ultimate goal of the proposed R&D is to design, develop and validate innovative CORBA-based software security services and compatible hardware architectures which provide high assurance for multi-level secure (MLS) network applications. The proposed approach is innovative in that it is based on the emerging OMG Security Services Specification (SSS) plus a proprietary technique for maintaining ...

    SBIR Phase I 1998 Department of DefenseNavy
  8. Design for Six Sigma Through Statistical Simulation Methods

    SBC: AET, Inc.            Topic: N/A

    The United States Navy has identified the need to develop innovative technologies that reduce the costs of manufacturing weapon systems and components. This requires a commitment to using statistics and design of experiments (DoE) methodologies to fully understand and characterize manufacturing processes. The vast amount of data required for full process characterization combined with complex ...

    SBIR Phase I 1998 Department of DefenseNavy
  9. Multiple Beam Antennas with Semi-Constrained Beamformers

    SBC: AJK TECHNOLOGY            Topic: N/A

    A mobile satellite communications link operating from vehicles on-the-move would provide significant benefits to the Marine Corps in the battlefield environment. The antenna should be capable of simultaneous and rapid tracking of two satellites while the vehicle is in motion over rough terrain, as well as providing ultra-wide bandwidth (C-band through Ku-band), medium to high gain, low profile, ru ...

    SBIR Phase I 1998 Department of DefenseNavy
  10. ALUMINIZED TORPEDO PROPELLANTS

    SBC: ARGONIDE CORP.            Topic: N/A

    Alex (nanosize aluminum) powder is being considered by several U. S. Navy groups as a propellant additive because it markedly increases combustion rate. Extrapolating equations for single particle combustion of aluminum shows the particle life of a 100 nanometer particle to be about 40 nanoseconds. Its small particle produces oxide that would minimize being accumulated on engine parts. Alex's r ...

    SBIR Phase I 1998 Department of DefenseNavy
US Flag An Official Website of the United States Government