Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. A Portable Electronic Composite Track Loading Fixture

    SBC: Advanced Technologies Group, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1998 Department of Transportation
  2. Highway Capacity Software in Portable Graphical User Interface (GUI) Format

    SBC: Catalina Engineering, Inc.            Topic: N/A

    The Highway Capacity Software (HCS) has, for the past 10 years, been the principal tool for applying the analysis methods of the Highway Capacity Manual (HCM). The HCS has been DOS-based with a very limited user interface. With a number of new research materials being produced, and an approved plan in place which leads to publication of an HCM 2000 and accompanying software, there is a strong op ...

    SBIR Phase II 1998 Department of Transportation
  3. Response-Based Parameter Estimation for Determining Unknown Bridge Foundations

    SBC: Infrasense, Inc.            Topic: N/A

    Evaluation of bridges for vulnerability to scour or other potential sources of damage requires knowledge of foundation conditions beneath piers and abutments that are often unknown. INFRASENSE proposed to develop and demonstrate a response-based parameter estimation method (RPEM) which will address the need for a simple, low-cost system for unknown foundation evaluation. The RPEM system is based ...

    SBIR Phase II 1998 Department of Transportation
  4. Automated Production of Composite Energy Absorbing Utility Poles

    SBC: KaZaK Composites Incorporated            Topic: N/A

    KaZaK Composites, Kaman Sciences and Dr. Malcolm Ray of the University of Iowa propose to investigate the design of energy absorbing utility poles made from composite materials. This team has considerable experience in the multiple technologies needed to successfully complete the proposed program, including design of high performance composite products for automated production and design, analysi ...

    SBIR Phase II 1998 Department of Transportation
  5. Automatic Vehicle Body Classification Using High-Resolution Laser RADAR

    SBC: Schwartz Electro-Optics, Inc            Topic: N/A

    N/A

    SBIR Phase I 1998 Department of Transportation
  6. Development of a measurement technique for Carbon Monoxide in exhaled breath as a Non-Invasive screening test for Asthma

    SBC: 2B TECHNOLOGIES, INC.            Topic: N/A

    Asthma is a major health problem facing the US, and the rest of the world's population. What is needed, both for the military as well as the civilian population, are rapid screening tests that would reduce the demand for intensive examinations. Exhaled breath monitoring is thus a new tool in the non-invasive assessment of airway inflammation which may be present before the onset of airway obstruct ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
  7. Electronically Shunted Smart Material Damper Packages for Extreme Environments

    SBC: Active Control eXperts, Inc.            Topic: N/A

    ACX proposes an alternate approach to damping for extreme environments, which uses an electrically shunted, surface mounted, smart material. This shunting approach has been most widely used in less extreme environments in conjunction with piezoceramic materials. The smart material is bonded to the surface of the target structure, in this case a part inside an aircraft engine. Stress on the part ...

    SBIR Phase I 1998 Department of DefenseAir Force
  8. Hybrid Vibration Control Actuator Systems

    SBC: Active Control eXperts, Inc.            Topic: N/A

    Active Control eXperts, (ACX) Inc. proposes to design, fabricate, and demonstrate a novel hybrid vibration ccntrol actuator system capable of very precise, controllable motion. This system will combine the advantages of a capacitive actuator with feedback control capability. This system will possess the force and stroke characteristics of a small hydraulic device and the bandwidth of electric moto ...

    SBIR Phase I 1998 Department of DefenseMissile Defense Agency
  9. Smart, Adaptive Packages for Vibration Suppression

    SBC: Active Control eXperts, Inc.            Topic: N/A

    In many structures with vibration problems, the nature of the problem is uncertain, or varies over time. Thus it is not possible 'a priori to design a linear, time-invariant, (LTI) feedback control law which is guaranteed to meet performance, or possibly even stability requirements over the entire operating range. These applications require an intelligent control system which can adapt to the ch ...

    SBIR Phase I 1998 Department of DefenseAir Force
  10. Prototype a Real-Time Distributed Gaming System Using HLA and SEDRIS

    SBC: ACUSOFT, INC.            Topic: N/A

    AcuSoft proposes to research and develop a Synthetic Environment RTI (SE-RTI). The SEDRIS initiative has established a new programming paradigm that provides lossless transmission of synthetic environment objects. The HLA has been designed to support interoperability and reuse of DoD simulations, and SEDRIS is a major component of HLA. Currently, the SEDRIS data model, APIs and format are prima ...

    SBIR Phase II 1998 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government