List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

Displaying 1 - 10 of 6910 results
  1. Electrical Power from Thermal Energy Scavenging in High Temperature Environments

    SBC: Physical Sciences Inc.            Topic: T3

    Physical Sciences Inc. and Purdue University propose to develop a novel approach to scavenging heat from high intensity thermal environments encountered during space missions and converting this thermal power to electrical power at high efficiency.  Examples include extremely hot heat shields during vehicle entry into planetary atmospheres (Mars/Venus probes) and during high speed ascent thro ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  2. SBIR Phase II: An Automated Platform for Rapid Discovery in Cell Biology

    SBC: Kytopen Corp            Topic: BT

    The broader impact/commercial potential of this Small Business Innovation Research (SBIR) Phase II project is to develop a fast, efficient, and scalable cell engineering technology that is easily automated through integration with liquid handling robots. Currently, there is a bottleneck in the process of cell engineering, especially in the engineering of cells for discovery of new therapeutics. Th ...

    SBIR Phase II 2019 National Science Foundation
  3. DEVELOPMENT OF A NOVEL TRANSMISSION FOR HELICOPTER APPLICATIONS

    SBC: VISHWA ROBOTICS AND AUTOMATION LLC            Topic: A16018

    US Army utilizes a wide range of vehicles across ground and air platforms where mechanical transmissions are used to transmit power from the engine to the drive shaft. Gears are used to create a torque and speed conversion with mechanical contact between the gear teeth surfaces. Lubrication is necessary to create a protective film between rolling and sliding surfaces as well as provide sufficient ...

    SBIR Phase II 2019 Department of DefenseArmy
  4. Signal Processing at Radio Frequency (RF) for Position Navigation & Timing Co-Site Interference

    SBC: Metamagnetics Inc.            Topic: A17039

    Numerous operations in an increasingly congested electromagnetic spectrum, intensify demand for data at the tactical edge, and the diminishing extent of electromagnetic spectrum provisioned for the military has resulted in the need for advanced technologies to mitigate Global Positioning System (GPS) interference due to co-site interference and C4ISR. Metamagnetics proposes a powerful and adaptabl ...

    SBIR Phase II 2019 Department of DefenseArmy
  5. CMOS Compatible Deposition of Multi-Ferroic Films for Tunable Microwave Applications

    SBC: Winchester Technologies, LLC            Topic: A17019

    Built upon the progress in Phase I period, Winchester Technologies, LLC proposes to investigate practical magnetoelectric antennas during the Phase II period for different applications. State of the art antennas suffer from three major open challenges: (1) large antenna size, (2) antenna impedance mismatch; (3) ground plane effect. This is because state of the art antennas are based on oscillating ...

    SBIR Phase II 2019 Department of DefenseArmy
  6. FTL's FASCI, Forward Area Suspended Contaminant Identifier, Field Instrumentation to measure, quantify, and characterize fuel contaminants

    SBC: FTL Labs Corporation            Topic: A17116

    To avoid machine failure, diesel engine hardware manufacturers recommend limiting fuel contamination particles based on number and size distribution. Work performed by TARDEC has developed limits for particulate and free water contamination in fuel utilizing light obscuration particle counting; however, this approach is unable to differentiate between solid particulates, free water droplets, and a ...

    SBIR Phase II 2019 Department of DefenseArmy
  7. Shipboard Additive Manufacturing (AM)/3D Printing

    SBC: Triton Systems, Inc.            Topic: N161038

    Triton Systems is working to expand the materials available for additive manufacturing. We will address shipboard FST concerns by incorporating unique flame retardants into the feedstock of standard additive manufacturing tools. We propose to reformulate polymeric materials to meet the FST requirements, while ensuring that the resultant polymers meet the physical/mechanical requirements for applic ...

    SBIR Phase II 2018 Department of DefenseNavy
  8. Retrofitting Code into Embedded Binaries

    SBC: BlueRISC Inc            Topic: N161070

    BlueRISCs proposed solution provides a generic binary-level toolkit for inserting new functionality into embedded system executables/firmware. It performs this without making any assumptions as to the level of information (i.e. symbolic information) contained in the binary image. The solution will take the form of a toolkit with automated support for binary image disambiguation, code reverse engin ...

    SBIR Phase II 2018 Department of DefenseNavy
  9. SBIR Phase II: Climate Analytics Platform for Catastrophe Modeling and Risk Management

    SBC: Risq, Inc            Topic: IT

    The broader impact/commercial potential of this Small Business Innovation Research (SBIR) Phase II project extends to industry stakeholders holding financial interests that are impacted by climate change. Climate change has a scientifically evident impact on the intensity, duration, and frequency of extreme weather events. It has become imperative for organizations in all sectors to gain a clear u ...

    SBIR Phase II 2018 National Science Foundation
  10. Wireless Technology for Probes and Accessories for Nondestructive Inspection Testing Instruments

    SBC: Jentek Sensors, Inc.            Topic: AF121214

    Aircraft structure nondestructive testing (NDT) is performed in a field or depot setting depending primarily on the amount of disassembly required to gain access to the inspection area. In order to reach set field and depot inspection intervals, the minimum detectable flaw size (Andi) must be sufficiently small. Legacy NDT methods with Andi's that are too large require out of cycle inspections whi ...

    SBIR Phase II 2018 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government