List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. A Novel Polymeric Trileaflet Heart Valve Prosthesis

    SBC: ABIOMED, INC.            Topic: N/A

    DESCRIPTION (provided by applicant): The goal of this proposal is to produce a fully characterized polyurethane heart valve prosthesis that will be ready for clinical evaluation. Existing replacement valves suffer from several shortcomings. Specifically, biological tissue fixation and methods used to mount the tissue to the supporting stent of bioprostheses cause time dependent structural changes ...

    SBIR Phase II 2007 Department of Health and Human Services
  2. BIOACTIVE POLYMER FOR VENTRICULAR ASSIST DEVICES- SBIR TOPIC #37

    SBC: ABIOMED, INC.            Topic: N/A

    N/A

    SBIR Phase I 2007 Department of Health and Human Services
  3. Phased Array Ultrasonic NDE of Plasma Facing Components

    SBC: ACOUSTIC IDEAS, INC.            Topic: 34

    Realizing the promise of nuclear fusion depends in part on effective plasma facing components (PFCs) that can withstand the intense heat loads, forces, and neutron bombardment of long-pulse high-power reactor operation. A single reactor such as ITER will require thousands of PFCs. Because imperfections in the joints of just one PFC could have disastrous consequences for reactor operation, joint ...

    SBIR Phase II 2007 Department of Energy
  4. Marine Portable Power Unit

    SBC: Atrex Energy, Inc.            Topic: N06105

    Many military missions involve the use of equipment that requires small batteries for power where AC grid power is unavailable. Also, there is a need for a high quality power output device that conditions a power input to make it suitable to power sensitive communications equipment. The weight of this equipment is also a factor which affects Its usefullness in quick moving military situations. M ...

    SBIR Phase I 2007 Department of DefenseNavy
  5. Hybrid Ceramic/Metallic Recuperator for SOFC Generators

    SBC: Atrex Energy, Inc.            Topic: 15

    Solid oxide fuel cells (SOFCs) are one of the most efficient and cleanest power generating systems being developed. A key component is the cathode air heat exchanger, or recuperator, which ensures that the cathode air, and thereby the cells, are at sufficient temperature to permit ion mobility ¿ and thereby improve overall SOFC system efficiency. At present, commercially available metallic recu ...

    SBIR Phase II 2007 Department of Energy
  6. Physics-Based Identification, Modeling and Management Infrastructure of Aeroelastic Limit-Cycle Oscillations

    SBC: Advanced Dynamics, Inc.            Topic: AF07T006

    The proposed research program aims to develop a physics-based identification, modeling and management infrastructure for aeroelastic limit-cycle oscillations. This infrastructure will be built upon high fidelity state-of-the-art theoretical/computational methods as validated and verified by available experimental data bases, and will include (1) rapid flutter boundary determination for a wide ran ...

    STTR Phase I 2007 Department of DefenseAir Force
  7. High Efficiency Regenerative Helium Compressor

    SBC: Advanced Mechanical Technology, Inc.            Topic: X901

    Helium plays several critical rolls in spacecraft propulsion. High pressure helium is commonly used to pressurize propellant fuel tanks. Helium cryocoolers can be used to sub-cool and thereby densify cryogenic propellants such as liquid hydrogen (LH2) and liquid oxygen (LO2). The use of densified cryogenic propellants can reduce the gross payload weight of a launch vehicle by up to 20%, or incr ...

    SBIR Phase I 2007 National Aeronautics and Space Administration
  8. SBIR Phase II: Low Cost Pressure Infiltration Casting Process to Support High Volume Manufacture of Graphite-Metal Thermal Management Components

    SBC: ADVANCED THERMAL TECHNOLOGIES            Topic: MI

    The Small Business Innovation Research (SBIR) Phase II project seeks to develop the use of a gas pressure infiltration casting process to manufacture graphite-metal billet materials that would be used to produce components for high power electronic device packaging. The heat dissipation rate of electronic devices has increased dramatically as a result of advances in semiconductor materials, faste ...

    SBIR Phase II 2007 National Science Foundation
  9. SBIR Phase I: Low-Cost Hot Press Die Casting of Graphite-Metal Materials

    SBC: ADVANCED THERMAL TECHNOLOGIES            Topic: MI

    The Small Business Innovation Research (SBIR) Phase I project will develop a hot press die casting technology to be used in the production of graphite-metal materials. In the proposed work, graphite preform and metal will be placed in a multi-chamber graphite die set and loaded into a hot press. Following evacuation of the die set and heating to the desired melt temperature, the die set mold wit ...

    SBIR Phase I 2007 National Science Foundation
  10. Improved system for producing adenoviral vectors

    SBC: ADVANTAGENE, INC            Topic: N/A

    First generation non-replicative adenoviral vectors show promise as anti-cancer agents and as prophylactic vaccines. Current methods for manufacturing these vectors use either the 293 cell line or the PER.C6 cell line. These producer cells provide complementary E1a and E1b viral function in the cell for disabled adenoviral vectors. The 293 cell line has been very useful and widely used for mak ...

    SBIR Phase I 2007 Department of Health and Human Services

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government