List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

Displaying 1 - 10 of 4508 results
  1. "BIOPOLYMER- BASED NONLINEAR OPTICAL MATERIALS"

    SBC: CAMBRIDGE SCIENTIFIC, INC.            Topic: N/A

    RECENT DEVELOPMENT OF MATERIALS WITH LARGE SECOND AND THIRD ORDER NONLINEAR EFFECTS HAS GENERATED INTEREST IN APPLICATIONS TO FUTURE TELECOMMUNICATIONS AND ELECTRONIC SYSTEMS. THE IDEAL NONLINEAR OPTICAL MATERIAL (NLOM) FOR MOST APPLICATIONS WOULD HAVE A VERY LARGE NONLINEAR RESPONSE, EXTREMELY LOW SWITCHING THRESHOLDS AND RAPID SWITCHING TIMES. POPULAR APPROACHES FOR THE GENERATION OF POLYMERS EX ...

    SBIR Phase I 1992 Department of DefenseAir Force
  2. "Flexible, Low VOC, Rapid-Cure, Topcoat-Compatible Aircraft Primer Coating"

    SBC: Infoscitex Corporation            Topic: AF07T010

    Current polysulfide based aircraft primers have excellent flexibility/elongation properties and do not fail around seams and fasteners. These primers, however, do not comply with the stringent emission regulations set forth by NESHAP due to excess VOC content. Additionally, these primers cure slowly under humid conditions and reduce the weatherability of topcoat/primer system due to migration of ...

    STTR Phase I 2007 Department of DefenseAir Force
  3. (A PEA IN A POD II) Adaptive Personalized Environment for Artificial Intelligence and Naturalistic Applications for PED Operational Domain

    SBC: APTIMA, INC.            Topic: AF161043

    Analysts within the Intelligence, Surveillance, and Reconnaissance (ISR) community have a challenging role, one that requires the ability to navigate and interpret mounds of data to produce responsive products during Phase 1 processing, exploitation, and dissemination (PED). New tools and information displays continue to increase the complexity of the analysts workspace without established human-m ...

    SBIR Phase II 2017 Department of DefenseAir Force
  4. 0.1 TO 1.0 PSI OVER FREQUENCY RANGE 10 HZ TO 5KHZ

    SBC: MASSA PRODUCTS CORPORATION            Topic: N/A

    A PORTABLE ELECTROACOUSTIC CALIBRATION TEST SET TO PERMIT THE CONVENIENT CALIBRATION OF DYNAMIC PRESSURE MEASUREMENT OVER THE PRESSURE RANGE 0.1 OS1 AND OVER THE FREQUENCY RANGE 10 HZ TO 5 KHZ WILL BE COMPLETELY DESIGNED DURING PHASE I. THE TEST CHAMBER WILL COMPRISE A RIGID WALLED ENCLOSURE OF MINIMUM VOLUME WITH A MAXIMUM LINEAR DIMENSION OF 5\8" TO PREVENT STANDING WAVES AT 5 KHZ. A REFERENCE S ...

    SBIR Phase I 1983 Department of DefenseAir Force
  5. 2 kW, Compact, Ultra-Narrow-Bandwidth, High-Power Diode Laser Pumps for Diode-Pumped Alkali Lasers

    SBC: TeraDiode, Inc.            Topic: MDA10007

    The diode pumped alkali laser (DPAL) allows for a potentially scalable approach towards a MW-class high energy laser system. By using an alkali vapor gain medium, one overcomes the intrinsic thermo-optical limitations of more conventional diode-pumped solid state laser (DPSSL) media. High spectral brightness diode pump sources are proposed by TeraDiode as the enabling element for efficient, kW-c ...

    SBIR Phase II 2013 Department of DefenseMissile Defense Agency
  6. 2.3 Micrometer Sensitive, High Speed, Extended InGaAs Avalanche Photodiodes

    SBC: Spire Corporation            Topic: N/A

    In Phase I, Spire will epitaxially grow, fabricate, and test two types of avalanche photodiodes (APDs) using 0.55 eV (2.3 mm cutoff wavelength) indium gallium arsenide In0.72Ga0.28As. This material will be "extended" past the common 0.74 eV lattice-matched In0.53Ga0.47As by use of an InxGa1-xAs grading layer. One APD type will have both absorption and multiplication/junction regions in the 0.55 ...

    SBIR Phase I 1996 Department of DefenseAir Force
  7. 20 Gigahertz (GHz) Radiation Hardened Solid State Power Amplifier (SSPA) for Satellite Communications (SATCOM) Downlinks

    SBC: Auriga Measurement Systems LLC            Topic: AF112150

    ABSTRACT: Auriga will produce an ultra-linear high-power, high-efficiency amplifier to be used in satellite communication systems. The innovative approaches are proposed and validated in Phase I. The enabling technology is Gallium Nitride (GaN) ,which is well-known for its power handling capability. State-of-the-art 0.15 m gate GaN HEMT technology will be used in the design. The concept will be v ...

    SBIR Phase I 2012 Department of DefenseAir Force
  8. 20 Gigahertz (GHz) Radiation Hardened Solid State Power Amplifier (SSPA) for Satellite Communications (SATCOM) Downlinks

    SBC: Auriga Measurement Systems LLC            Topic: AF112150

    ABSTRACT: Auriga will complete the development of an innovative linearized K-band High Power Amplifier (HPA) in 24 months with one additional month for the final report. This innovative approach is expected to bring revolutionary performance (close to 40% PAE under QPSK). Auriga"s HPA will have a linearizer integrated in the MMIC and packaged, requiring no other interface or digital chips to ...

    SBIR Phase II 2013 Department of DefenseAir Force
  9. 20% Efficiency Rad Hard Thin Film Multi-Junction Solar Cells

    SBC: Eikos, Inc.            Topic: AF083186

    Eikos Inc proposes to create 20% efficient radiation hard dual junction thin film photovoltaics. We will utilize our unique hole conducting transparent electrode made from carbon nanotubes as an interconnecting layer between the two junctions. These devices will demonstrate high efficiency, and the capability for deposition onto flexible substrates for a power density >1,000 W/m2 BENEFIT: Eikos a ...

    SBIR Phase I 2009 Department of DefenseAir Force
  10. 3-D Graphite-Copper Composite Heat Exchanger

    SBC: FOSTER-MILLER, INC.            Topic: N/A

    Foster-Miller proposes a 3-D graphite-copper (Gr/Cu) composite to meet the strength and transverse thermal conductivity criteria set forth in the solicitation. In conjunction with the NASP office of Rocketdyne, Phase I will develop this unique composite to replace the current NARloy Z heat exchanger for the NASP ramjet inlet. The 3-D Gr/Cu composite is comprised of a 2-D graphite fiber textile in ...

    SBIR Phase I 1994 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government