You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Optical Instrumentation for MEMS Oscillatory Parallel-Plate Rheometer

    SBC: AGILTRON, INC.            Topic: 9060563R

    Leveraging Agiltron’s industrial leading developments for optical measurement of motion in MEMS devices, we propose to use electro-optical sensors for measuring the displacement and gap in the NIST micro-rheometer. No electrical connections are required to the moving parts. All electronics and optics are removed from the chip so that it is inexpensive and disposable. A fixed, simple micro-fluidi ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  2. High Speed and High Sensitivity Quadrant Photodetector

    SBC: RADIATION MONITORING DEVICES, INC.            Topic: 912085R

    To further advance the characterization and utility of microcantilevers, next generation optical detectors with higher frequency response, improved displacement resolution and lower noise for weak signal detection are needed. Consequently, Radiation Monitoring Devices, Inc. (RMD) will develop a turnkey optical detector module for use in characterizing the displacement and resonant frequencies of m ...

    SBIR Phase II 2011 Department of CommerceNational Institute of Standards and Technology
  3. A Single Aperature Dual-Wavelength Dual Polarized Antenna for AWRAP

    SBC: REMOTE SENSING SOLUTIONS, INC.            Topic: 834D

    Severe weather impacts our daily lives, society and nation’s economy. From an average of $10B (2005 dollars) annual loss due to tropical cyclones since 1900 to $200B in the commercial shipping industry that is threatened by severe ocean storms to the hundreds of lives and assets being lost in the $20B recreational boating industry. In these cases and many more, accurate now-casting and forecasti ...

    SBIR Phase I 2011 Department of CommerceNational Oceanic and Atmospheric Administration
  4. Biomass to Olefins by Catalytic Fast Pyrolysis

    SBC: AERODYNE RESEARCH INC            Topic: 02d

    Aerodyne Research Inc. (ARI) and the Massachusetts Institute of Technology (MIT) plan to develop an efficient catalytic system to convert biomass into olefins for the production of hydrocarbons in the gasoline, diesel, and/or jet fuel range by way of catalytic fast pyrolysis. Conversion of lignocellulosic feedstocks from resources as varied as corn stover, grasses, wood, and sugar cane bagasse is ...

    SBIR Phase I 2011 Department of Energy
  5. Ultra-High Strength Nanostructured Magnesium Alloy-Composite

    SBC: Aspen Systems, Inc.            Topic: 04e

    Current efforts of DOE to create future lightweight systems in order to attain significant energy saving, cost reduction and improved efficiency requires development of advanced nanostructured lightweight composite materials with improved ductility and high tensile strength. Magnesium (Mg) with a density of approximately two-thirds of aluminum is the lightest structural material. Despite this adva ...

    SBIR Phase I 2011 Department of Energy
  6. Spiral Welded Wind Turbine Towers

    SBC: Keystone Tower Systems, Inc.            Topic: 07a

    Large-scale wind turbine designs are significantly constrained by transportation limits. As utility scale wind turbines have developed, they have steadily increased in size and have seen a steady decrease in cost of energy. However, further increases in on-shore turbine size beyond 3MW are prohibited by hard limits in the size of components that can be economically transported to the wind farm sit ...

    SBIR Phase I 2011 Department of Energy
  7. High Permeance Hybrid Membranes for CO2 Separation

    SBC: ASPEN PRODUCTS GROUP INC            Topic: 09a

    The capability to efficiently remove carbon dioxide from industrial gas streams is desirable for a wide variety of applications. Carbon dioxide (CO2) is a byproduct of many industrial processes associated with the transformation of fossil fuels into usable products such as heat, electricity, and chemicals. In addition to being a greenhouse gas pollutant, the presence of carbon dioxide in chemical ...

    SBIR Phase I 2011 Department of Energy
  8. Optimization of CO2- Coal Slurry

    SBC: TIAX LLC            Topic: 24a

    Consumption of coal and other fossil fuels is a major contributor to emission of carbon dioxide and criteria pollutants. Coal gasification technologies equipped with carbon capture and sequestration (CC & amp;S) technology can help address both these problems. However, current coal gasification concepts suffer from a combination of low efficiency and high capital cost. TIAX proposes to investigate ...

    SBIR Phase I 2011 Department of Energy
  9. Engineering High Resolution Scintillator for Next-Generation High Frame Rate Detectors

    SBC: RADIATION MONITORING DEVICES, INC.            Topic: 12a

    Recent developments in synchrotron radiation sources have generated an urgent need for high performance X-ray detectors. While new imaging devices have been developed that employ high performance CCD sensors, what is currently lacking in these detectors is an adequate X-ray-to-light converter that will provide high performance in terms of spatial resolution, high efficiency and, perhaps most impor ...

    SBIR Phase I 2011 Department of Energy
  10. High Efficiency High Resolution Sensor for Hard X-Ray Microtomography

    SBC: RADIATION MONITORING DEVICES, INC.            Topic: 12e

    X-ray microtomography (XMT) is a powerful tool for researchers in a wide range of fields, allowing 3D imaging at the micron scale. Many of the DOE synchrotron tomography facilities are involved in research that requires hard X-rays (high energy, up to 100 keV) in order to get better penetration into metal samples. At these higher energies the scintillator quickly becomes the limiting factor result ...

    SBIR Phase I 2011 Department of Energy
US Flag An Official Website of the United States Government