Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Modeling of Lithium-Ion Cell Performance

    SBC: GLOBAL TECHNOLOGY CONNECTION, INC.            Topic: MDA10T004

    Global Technology Connection, Inc., in collaboration with academic partners, Georgia Tech"s Center for Innovative Battery and Fuel Cell Technologies, Penn State University, and industrial partner Eagle Picher propose to create a physics-based modeling for predicting the life performance of Low and Middle Earth Orbit (LEO/MEO) Lithium-ion cells. The relationships between solid-electrolyte interpha ...

    STTR Phase I 2011 Department of DefenseMissile Defense Agency
  2. High-Speed Three-Channel Photonic Time Delay Unit

    SBC: AGILTRON, INC.            Topic: MDA08T012

    An innovative, super-miniature, fast-switching array-based photonic time delay device is being developed for the active electronically scanned-array (AESA) MDA and Navy radars. The design is based on the fast electro-optic effect, the super miniature fiber-lens collimation array, and the existing WDM photonic true time delay technologies. In Phase I Agiltron has successfully demonstrated the core ...

    STTR Phase II 2011 Department of DefenseMissile Defense Agency
  3. Very Large Area Microchannel Plate Neutron Detectors

    SBC: NOVA SCIENTIFIC INCORPORATED            Topic: 18a

    NOVA Scientific, Inc., teamed with the Electronics Group of Oak Ridge National Laboratory, proposes to construct very large area Microchannel Plate neutron detectors. The applications of these much larger format detectors will serve an exceptionally broad range of government agencies from neutron scattering detectors for DOE to nuclear material panel detectors for NNSA, and ultimately to nuclear m ...

    STTR Phase I 2011 Department of Energy
  4. Thin Robust Electrical Insulator for High Field HTS Magnets

    SBC: Engi-Mat Co.            Topic: 62d

    This Small Business Technology Transfer Phase I project is proposed to address high temperature superconductor insulation to help improve stability and quench protection. Most importantly stability will be increased so that the power level at which quench occurs is greatly increased. Quench is the rapid, unintended transition from superconducting to normal conducting. It is a consequence of a faul ...

    STTR Phase II 2011 Department of Energy
  5. Development of High Current 2G High Temperature Superconductor Cabling Technology

    SBC: Supercon, Inc.            Topic: 66c

    Future magnets for Fusion Energy Systems require superconducting cables with improved high critical current carrying capacity at high magnetic fields, 20 Kelvin operation, low AC losses and lower cost. A new method of fabricating a high current cable with 2G HTS tapes has been developed that will improve the engineering current density achievable. Commercial Applications and Other Benefits: Fut ...

    STTR Phase II 2011 Department of Energy
  6. High Power, Modulation Doped AlGaN/GaN FETs

    SBC: CERMET, INC.            Topic: N/A

    Two major opportunities are outlined in the proposed Phase II work. The first opportunity is the demonstration of doped ZnO bulk crystal growth with specific electrical properties. The second opportunity is the growth of nitride heterostructures on thesesubstrates. High quality, doped ZnO bulk substrates of 50mm diameter will be made possible with Cermet's proven crystal growth technology. The gro ...

    STTR Phase I 2003 Department of DefenseMissile Defense Agency
  7. High Power, Modulation Doped AlGaN/GaN FETs

    SBC: CERMET, INC.            Topic: N/A

    Two major opportunities are outlined in the proposed Phase II work. The first opportunity is the demonstration of doped ZnO bulk crystal growth with specific electrical properties. The second opportunity is the growth of nitride heterostructures on thesesubstrates. High quality, doped ZnO bulk substrates of 50mm diameter will be made possible with Cermet's proven crystal growth technology. The gro ...

    STTR Phase II 2003 Department of DefenseMissile Defense Agency
  8. Data Driven Prognostics

    SBC: Firehole Technologies, Inc.            Topic: N/A

    Programs such as Airborne Laser and Space-Based Laser are in need of highly mass efficient structural materials to achieve system performance targets. This naturally leads to graphite fiber reinforced polymers for many system components. For someapplications, such as cryogen storage vessels, these materials are subject to micro cracking under little or no structural loading. New materials with ...

    STTR Phase I 2003 Department of DefenseMissile Defense Agency
  9. Data Driven Prognostics

    SBC: Golden Helix, Inc.            Topic: N/A

    We propose to develop a prototype suite of recursive partitioning (RP) methodologies to provide advanced warning of failure, malfunction and/or performance degradation for Airborne Laser Program subsystems in service. Through better monitoring and analysisof the status of its systems, prediction of equipment life remaining can be made and corrective action taken to enhance the availability of the ...

    STTR Phase I 2003 Department of DefenseMissile Defense Agency
  10. Development of HgCdTe Material Models for Next Generation Infrared Focal Plane Architectures

    SBC: Magnolia Optical Technologies, Inc.            Topic: N/A

    Developments of multi-color FPA's are important for use in missile defense systems (such as GMD and THAAD) applications. Key to meeting these system requirements is development of multi-color HgCdTe focal plane arrays with high pixel uniformity, reducedreadout noise, improved resolution, and higher temperature of operation, to reduce cost and volume of these sensors and seekers.Magnolia Optical Te ...

    STTR Phase I 2003 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government