You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Innovative Hardware Technologies for Electromagnetic Attack Rejection in Ballistic Missile Defense System (BMDS) Radars

    SBC: NESS ENGINEERING, INC.            Topic: MDA10T001

    Radio Frequency Directed Energy Weapons (RFDEW) are maturing sufficiently to become a threat to sensitive circuits onboard military platforms. With a large number of active elements, Ballistic Missile Defense System (BMDS) phased array radar units are particularly susceptible and require improvement over the current state-of-the-art in limiter technology. This is particularly needed in the develop ...

    STTR Phase I 2011 Department of DefenseMissile Defense Agency
  2. Modeling of Lithium-Ion Cell Performance

    SBC: GLOBAL TECHNOLOGY CONNECTION, INC.            Topic: MDA10T004

    Global Technology Connection, Inc., in collaboration with academic partners, Georgia Tech"s Center for Innovative Battery and Fuel Cell Technologies, Penn State University, and industrial partner Eagle Picher propose to create a physics-based modeling for predicting the life performance of Low and Middle Earth Orbit (LEO/MEO) Lithium-ion cells. The relationships between solid-electrolyte interpha ...

    STTR Phase I 2011 Department of DefenseMissile Defense Agency
  3. Modeling of Lithium-Ion Cell Performance

    SBC: Quallion LLC            Topic: MDA10T004

    Quallion LLC is pleased to submit this proposal in response to the solicitation for"Modeling of Lithium-ion Cell Performance."This proposal focuses on the area of interest relating to"accelerated life testing for LEO because the processes that occur at the anode and cathode at high DoD"s (60+%) are poorly understood as to how they relate to low DoD"s (30% and lower)."Quallion has developed a refer ...

    STTR Phase I 2011 Department of DefenseMissile Defense Agency
  4. Modeling and Verification of Li-Ion Cells Under Accelerated Life Testing

    SBC: GLOBAL AEROSPACE CORPORATION            Topic: MDA10T004

    Rechargeable Lithium-Ion (Li-Ion) cell technology is attractive for MDA space satellites. But, because this technology is relatively new and is still evolving, its performance and behavior must be characterized by laboratory life testing that is very time consuming and expensive. A requirement for a 10-year real-time cell life test could delay the incorporation of Li-Ion cell technology into MDA s ...

    STTR Phase I 2011 Department of DefenseMissile Defense Agency
  5. Turbulent Combustion Interaction Models for LES Simulations of High Speed Flow

    SBC: CASCADE TECHNOLOGIES INC            Topic: OSD10T001

    At present, the predictive capability of simulation codes and models used in the conceptual planning and design of high-speed propulsion systems is limited by the ability to describe the complex flow fields inside the combustor, mixing models, detailed chemistry and turbulence-chemistry interactions, and subgrid-closure models. The objective of the proposed work is to develop and validate a high-f ...

    STTR Phase I 2011 Department of DefenseAir Force
  6. Nano-Sintered High Thermal Conductivity Composites

    SBC: CREATIVE ELECTRON INC            Topic: AF10BT01

    ABSTRACT: This Phase I STTR project will develop carbon fiber reinforced polymer (CFRP) material systems incorporating metallic nanoparticles with low-temperature sintering properties to render structures with very high transverse thermal conductivity. CFRPs are already used in a myriad of applications requiring high strength-to-weight ratio, but their poor transverse thermal conductivity limits ...

    STTR Phase I 2011 Department of DefenseAir Force
  7. Foldable/Rollable High Efficiency Solar Cell Modules

    SBC: OPTICOMP NETWORKS, INC.            Topic: AF10BT05

    ABSTRACT: A new method for manufacturing thin, flexible, portable high efficiency III-V PV modules that can be folded and rolled. In particular, IMM3J cells are lifted-off their growth substrate and transferred to a polyimide blanket sheet holding up to a few hundred cells. They are fully encapsulated. The interconnects are made with novel use of electrically conductive adhesives and polymers. Th ...

    STTR Phase I 2011 Department of DefenseAir Force
  8. RF Microplasma for Ozone Generation

    SBC: PHYSICAL SCIENCES INC.            Topic: AF10BT08

    ABSTRACT: Ozone generation for decontamination systems has been around for many decades but systems, such as dielectric barrier discharge (DBD), are not suited to field use and the high voltages employed present serious safety problems. RF-driven microplasma devices are a unique technology for low-cost and low-power-voltage plasmas in vacuum and in air up to atmospheric pressure with a number of ...

    STTR Phase I 2011 Department of DefenseAir Force
  9. Photoactivatable Protean Glass/Ceramic Materials for Imbedded Miniature Devices

    SBC: Chemat Technology, Inc.            Topic: AF10BT11

    ABSTRACT: Photosensitive protean materials form essentially a new class of materials which are manufactured in one state but its select material properties can be physically and locally altered through patterning and lithography. In this proposed research, we will demonstrate the feasibility of creation of conductive copper lines imbued in the glass by using novel glasses with laser direct writin ...

    STTR Phase I 2011 Department of DefenseAir Force
  10. Photostructural Glass Ceramics and Optimized Processing for Laser Initiated 3D Conductors (PhotoCon)

    SBC: OBALON, LLC            Topic: AF10BT11

    ABSTRACT: In this STTR effort a small business company Obalon LLC is teaming up with industry leader Aerospace Corporation in order to develop novel photostructural glass ceramic composition PhotoCon with capability of laser induced 3D conductor patterning inside the bulk material. Following the photolytic process of laser exposure and the development of latent image the team will implement the s ...

    STTR Phase I 2011 Department of DefenseAir Force
US Flag An Official Website of the United States Government