You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. "CYCLE LIFE SENSOR FOR RECHARGEABLE LITHIUM BATTERIES"

    SBC: COVALENT ASSOC., INC.            Topic: N/A

    THIS PROPOSAL ADDRESSES THE PROBLEM OF CHARACTERIZING THE STATE OF A RECHARGEABLE LI BATTERY AS A FUNCTION OF CYCLE LIFE HISTORY. BECAUSE ALL LI BATTERIES ARE HERMETICALLY SEALED, WE HAVE CHOSEN TO EVALUATE THE AMOUNT AND DISTRIBUTION OF LI-ELECTROLYTE DEGRADATION PRODUCTS IN SITU BY THE APPLICATION OF ELECTROANALYTICAL TECHNIQUES AT MICROELECTRODES IMBEDDED IN THE CELL PACKAGE. TWO DIFFERENT ELEC ...

    SBIR Phase I 1988 National Science Foundation
  2. 100-500 keV Compact Electron and X-Ray Source

    SBC: Maine Research and Technology Co, Inc            Topic: N/A

    N/A

    SBIR Phase I 1995 National Science Foundation
  3. 2 kW, Compact, Ultra-Narrow-Bandwidth, High-Power Diode Laser Pumps for Diode-Pumped Alkali Lasers

    SBC: TeraDiode, Inc.            Topic: MDA10007

    The diode pumped alkali laser (DPAL) allows for a potentially scalable approach towards a MW-class high energy laser system. By using an alkali vapor gain medium, one overcomes the intrinsic thermo-optical limitations of more conventional diode-pumped solid state laser (DPSSL) media. High spectral brightness diode pump sources are proposed by TeraDiode as the enabling element for efficient, kW-c ...

    SBIR Phase II 2013 Department of DefenseMissile Defense Agency
  4. 3-D Epoxy Printed Fabrics (Woven, Knits, Stretch Knits) for Integrated Sharp Object Protection for Dive Suit or Dive Skin Garment and Body Mapped Prot

    SBC: EY TECHNOLOGIES            Topic: SOCOM10001

    EY Technologies (EYT) proposes to accomplish three key objectives in this effort: 1) Generate 3-D Epoxy Printed Fabric Surfaces for Integrated Dive-Suit Sharp Object Protection. 2) Generate 3-D Epoxy Printed Knit Fabrics for Dive-Skin Garment for Sharp Object Protection 3) Body Mapped Sharp Object Protection Dive-Suit Design EYT has partnered with Polartec®, HDM, WhitesDiving to address the lack ...

    SBIR Phase I 2010 Department of DefenseSpecial Operations Command
  5. 3D Printed Microscale Radiation Shield for Microelectronics

    SBC: Triton Systems, Inc.            Topic: MDA17012

    The purpose of this proposal is to develop an additive manufacturing process capable of printing radiation blocking material around a microelectronic component. The goal of the radiation shield is to mitigate single event effects from a linear energy transfer (LET) > 20 [MeV-cm2]/mg particle and reduce radiation dose rate by 25%. During Phase I, Triton Systems proposes to prove the feasibility of ...

    SBIR Phase I 2018 Department of DefenseMissile Defense Agency
  6. A 3-D / 4-5 COMPUTERIZED MODEL FOR HUMAN-MACHINE INTEGRATION IN APPAREL MANUFACTURING ENGINEERING

    SBC: Stylometrics Inc            Topic: N/A

    MAINTAINING A STRONG MANUFACTURING BASE IN AMERICA IS MOST IMPORTANT TO OUR GREATER PROPORTION OF CITIZENS THAT ARE AMERICA'S HUMAN RESOURCES. THE RETAIL-APPAREL-TEXTILE INDUSTRIES HAVE LITTLE REGARD FOR THEIR HUMAN RESOURCES, ANDARE FRAGMENTED TO THE POINTS THAT ATTEMPTS TO INTEGRATE USING TECHNOLOGY HAVE MET WITH LIMITED SUCCESS. PHASE I IS PROPOSING THREE INNOVATIVE TECHNOLOGIES THAT CAN SOLVE ...

    SBIR Phase I 1992 National Science Foundation
  7. A CALCIUM/ORGANIC CATHOLYTE CELL

    SBC: ECO ENERGY CONVERSION            Topic: N/A

    THE OBJECTIVE OF THE PROPOSED PROGRAM IS TO INITIALLY CHARACTERIZE THE PERFORMANCE OF A NEW CLASS OF CALCIUM CELLSWHICH USE AN ORGANIC CATHOLYTE. BASED ON INITIAL DATA, THISCLASS OF CELLS WILL HAVE THE ENERGY AND POWER DENSITIES OF BOBBIN-TYPE LI/SOC12 CELLS. THE MAJOR ADVANTAGES OF THIS NEW CLASS OF CELLS ARE ITS HIGH PERFORMANCE LEVEL, THE NON-CORROSIVE NATURE OF ITS CATHOLYTE, THE LOW COST OF I ...

    SBIR Phase I 1988 National Science Foundation
  8. A CARBON-13 ISOTOPE ANALYZER

    SBC: Aerodyne Research, Inc.            Topic: N/A

    ISOTOPIC CARBON ANALYSIS PROVIDES A VALUABLE TOOL FOR STUDIES OF METABOLIC PATHWAYS AND FOR TRACING CARBON TRANSFORMATIONS IN THE ENVIRONMENT. THIS PROPOSAL WOULD DEVELOP AN OPTICAL TECHNIQUE FOR THE CONVENIENT MEASUREMENT OF CARBON ISOTOPIC ((13)C/(12)C) RATIOS. THE INSTRUMENT WILL UTILIZE A LINEAR PHOTODIODE ARRAY TO IMAGE THE SPECTRA ARISING FROM PLASMA EMISSION OF THE CARBON-CONTAINING MOLECUL ...

    SBIR Phase II 1990 National Science Foundation
  9. A CARBON-13 ISOTOPE ANALYZER

    SBC: Aerodyne Research, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1989 National Science Foundation
  10. A CHLOROPHYLL FLUORESCENCE SENSOR FOR ECOLOGICAL STUDIES

    SBC: Aerodyne Research, Inc.            Topic: N/A

    WE PROPOSE TO MEASURE CHLOROPHYLL FLUORESCENCE IN THE OXYGENA BAND, WHERE ATMOSPHERIC OXYGEN SPECTRALLY EXCLUDES INCIDENT SUNLIGHT. A CELL CONTAINING LOW PRESSURE OXYGEN WILL BE USED AS A NARROW BAND FILTER TO ABSORB CHLOROPHYLL FLUORESCENCE PHOTONS AT THE A BAND LINE CENTERS, AND LATER RE-EMIT THEM FOR DETECTION.

    SBIR Phase I 1992 National Science Foundation
US Flag An Official Website of the United States Government