You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Conformal Multilayered Passivation for Type-II indium arsenide/gallium antimonide Superlattice Mesas
SBC: RADIATION MONITORING DEVICES, INC. Topic: MDA14021The unique electronic properties of periodically-arranged indium arsenide/gallium antimonide (InAs/GaSb) mesas in the type-II strained layer superlattices (SLS) make them a superior alternative to the conventional HgCdTe sensors for longwave infrared focal plane array (LWIR FPA) detectors. However, despite the highly promising quantum structures of SLS, its performance is currently limited by high ...
SBIR Phase II 2017 Department of DefenseMissile Defense Agency -
Lightweight Hybrid Ablator/Aerogel Insulator for SM-3 TSRM, Phase II
SBC: ULTRAMET Topic: MDA14002Advanced lightweight ablative materials are needed to provide additional performance gains for next-generation ballistic missile defense system (BMDS) interceptors. The interceptor third stage, in particular, will benefit substantially from a reduction in inert weight, which enables increased missile stack velocity. Operational targets for the interceptor third-stage rocket motor (TSRM), and for o ...
SBIR Phase II 2017 Department of DefenseMissile Defense Agency -
Filament Wound Resin Transfer Molded Composite Pressure Vessel
SBC: SAN DIEGO COMPOSITES, INC. Topic: MDA05024San Diego Composites (SDC) is developing a toroidal composite overwrap pressure vessel (COPV) for use on next generation propulsion systems. A development effort sought to optimize the electron beam welding process parameters to reduce weld integrity sensitivity to poor fit up conditions when butt-welding the thin titanium liners integral to these composite overwrapped tanks. Results from this dev ...
SBIR Phase II 2017 Department of DefenseMissile Defense Agency -
Metrology of thin films on sapphire substrate
SBC: OPTOWARES INC Topic: DMEA16B001There is a lack of non-destructive metrology tool to measure the thickness of thin films on sapphire substrate due to the transparency of the
STTR Phase I 2017 Department of DefenseDefense Microelectronics Activity -
High-brilliance 11keV X-ray Source
SBC: SIGRAY, INC. Topic: DMEA162001This Small Business Innovation Proposal aims to establish the feasibility of developing a high flux x-ray source using a patent-pending microstructured anode comprised of Platinum microstructures embedded in a diamond substrate. The resulting source will provide a breakthrough in achievable throughput for the application of rapid integrated circuit (IC) inspection, due to two major innovative adva ...
SBIR Phase I 2017 Department of DefenseDefense Microelectronics Activity -
Ferroelectric X-Ray Generator (FLEX)
SBC: Luminit LLC Topic: DMEA162001To address the DMEA need for rapid x-ray inspection of large volumes of integrated circuits (ICs), Luminit, LLC, proposes to develop a new compact, high-brilliance x-ray source: the Ferroelectric X-Ray Generator (FLEX). This proposed device is based on an innovative combination of a ferroelectric, photogalvanic crystal combined with an undulator. The innovation in the physical principles of compac ...
SBIR Phase I 2017 Department of DefenseDefense Microelectronics Activity -
Decision Algorithm for PIA
SBC: OPTO-KNOWLEDGE SYSTEMS INC Topic: MDA16001The MDA system receives information from multiple sensors in the system architecture that may observe an intercept event. The proposal addresses the type of information that sensors should provide and a decision scheme that combines potentially conflicting information, arriving asynchronously, with different level of confidence. The system has a short time to decide whether reengage the target f ...
SBIR Phase I 2017 Department of DefenseMissile Defense Agency -
System-level Post Intercept Assessment
SBC: TOYON RESEARCH CORPORATION Topic: MDA16001When targeting an enemy threat, it is very important to know how effective the intercept was so as to make decisions on how to proceed. Pre-intercept information may be subject to uncertainty or accuracy considerations, meaning that a pre-intercept effectiveness assessment should be refined by post-intercept sensor data. Toyon Research Corporation and Modern Technology Solutions, Inc. (MTSI) propo ...
SBIR Phase I 2017 Department of DefenseMissile Defense Agency -
Standardized Atmosphere Generator (SAG) for Inline Environment Generation
SBC: SPECTRAL SCIENCES INC Topic: MDA16003We intend to dramatically improve the performance of the Standardized Atmosphere Generator (SAG), an environmental background model used to characterize the atmospheric state. SAG combines multiple empirical models, including NRL-MSISE-00, URAP, NRL climatology, AFGL atmospheric profiles, SNOE databases, the International Reference Ionosphere, and photochemical and empirical models developed by S ...
SBIR Phase I 2017 Department of DefenseMissile Defense Agency -
Synthetic Inline Generation of Modeled Atmosphere
SBC: Physical Optics Corporation Topic: MDA16003To address the MDAs need for an innovative, low-cost process to perform inline environment generation for real-time hardware-in-the-loop testing and constructive digital simulations, Physical Optics Corporation (POC) proposes to develop a new Synthetic Inline Generation of Modeled Atmosphere (SIGMA) system based on deep modeling and GPU acceleration. The innovation in using multi-layer stacked dee ...
SBIR Phase I 2017 Department of DefenseMissile Defense Agency