You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Acoustic Internal Automated Concrete Tie Tester

    SBC: NDT CORPORATION            Topic: 23FR1

    NDT Corp. will take the currently developed ACTT system, which can accurately assess the internal condition of concrete crossties and increase its speed.FRA 23-FR1 requests a system that at high speeds can assess both the internal and external condition of concrete crossties.Currently there are systems that can perform the external assessment at the required speeds.However, there is no system that ...

    SBIR Phase I 2023 Department of Transportation
  2. Wearable Altering Tactile Cues for Hazard Response

    SBC: TRITON SYSTEMS, INC.            Topic: 23PH4

    First responders to hazardous material (HAZMAT) incidents face many safety risks daily, such as exposure to hazardous chemicals and toxic gases, which can be difficult to detect. Although there have been advancements in wearable sensors for hazardous gases, sensor technology for HAZMAT incident response lags behind sensor technology advancement in biomedical fields. There is a need to integrate se ...

    SBIR Phase I 2023 Department of Transportation
  3. A Data-Driven Multi-Perspective Solution for Improving Transit Bus Safety

    SBC: Tranalytics, LLC            Topic: 22FT1

    This research proposes a data-driven and multi-perspective solution to reduce injuries and fatalities due to bus collisions with other vehicles. It goes beyond reviewing historical bus crash reports by collecting field LiDAR data for better understanding a variety of factors that may contribute to bus collisions and injuries/fatalities. It also recognizes that collision avoidance technologies (whi ...

    SBIR Phase II 2023 Department of Transportation
  4. A Data-Driven Multi-Perspective Solution for Improving Transit Bus Safety

    SBC: Tranalytics, LLC            Topic: 22FT1

    This research proposes a data-driven and multi-perspective solution to reduce injuries and fatalities due to bus collisions with other vehicles. It goes beyond reviewing historical bus crash reports by collecting field LiDAR data for better understanding a variety of factors that may contribute to bus collisions and injuries/fatalities. It also recognizes that collision avoidance technologies (whi ...

    SBIR Phase I 2022 Department of Transportation
  5. Autonomous, In-Situ Fugitive Microplastic Detector and Datalogger

    SBC: OPTOWARES INC            Topic: 21FH1

    In-place resurfacing of asphalt-based wear layers is an increasingly common method of roadway rehabilitation. With the addition of waste microplastics to bitumen binders as performance improvers, the grinding of asphalt during in-place resurfacing potentially brings microplastic particulate pollution to every community in the US. In addition, the wear of roadway surfaces is a known major source of ...

    SBIR Phase II 2022 Department of Transportation
  6. High Throughput Experimental Discovery and Optimization for 3D Nanofabrication of Optical & Photonic Materials and Devices.

    SBC: IRRADIANT TECHNOLOGIES INC.            Topic: 2

    The fields of optics and photonics have long sought methods by which to do 3D nanofabrication; however, all methods to date have been lacking in material choices, speed, and possible geometries. Implosion Fabrication (ImpFab) is newly developed method for the 3D nanofabrication that is uniquely suited to address these needs and can therefore act as a platform for the future manufacturing of optica ...

    SBIR Phase II 2022 Department of CommerceNational Institute of Standards and Technology
  7. Contact-free optical metrology for energy-efficient manufacturing of mechanical metamaterials (Phase II)

    SBC: MULTISCALE SYSTEMS, INC.            Topic: 2

    Mechanical metamaterials are a class of advanced materials that use repeated three-dimensional geometric patterns to endow common materials with new, enhanced, and superior material properties. The “meta” in “metamaterials” refers to the geometric pattern, while the “material” can be a metal, polymer, ceramic, etc. Our expertise focuses on the design and production of mechanical metama ...

    SBIR Phase II 2022 Department of CommerceNational Institute of Standards and Technology
  8. Peracetic Acid Based Disinfectants for PPEs

    SBC: VURONYX TECHNOLOGIES LLC            Topic: 2

    In this Phase 1 SBIR proposal, Vuronyx Technologies proposes to develop acetylperoxyborate (APB) powders for disinfection of Personal Protective Equipments (PPEs) so that they can be reused. APB powders are stable, active-oxygen containing compounds that release peracetic acid upon dissolution in water. As explained in this proposal, the use of a APB powder disinfectant has the following advantage ...

    SBIR Phase I 2022 Department of CommerceNational Institute of Standards and Technology
  9. Autonomous, In-Situ Fugitive Microplastic Detector and Datalogger

    SBC: OPTOWARES INC            Topic: 21FH1

    In-place resurfacing of asphalt-based wear layers is an increasingly common method of roadway rehabilitation. With the addition of waste microplastics to bitumen binders as performance improvers, the grinding of asphalt during in-place resurfacing potentially brings microplastic particulate pollution to every community in the US. In addition, the wear of roadway surfaces is a known major source of ...

    SBIR Phase I 2021 Department of Transportation
  10. Active Termination of Lithium-Ion Battery Fires and Thermal Runaway

    SBC: MARINE FIRE SYSTEMS LLC            Topic: 21PH1

    "Li-ion batteries have a major downside which is their potential to initiate fires, escalate to thermal runaway increasing the violence, and to possibly explode.Traditional fire extinguishing agents either perform poorly or are impractical on these high-energy fires.Two innovations, in combination, are proposed for research and development.Pyrotechnic aerosol extinguishing agents will be proven hi ...

    SBIR Phase I 2021 Department of Transportation
US Flag An Official Website of the United States Government