You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. An Integrated Data System for Machine Learning based Prediction of Radio Frequency Integrated Circuits (RFIC)

    SBC: HelloMaxwell, Inc.            Topic: 90

    Radio frequency integrated circuits (RFICs) are key components for wireless communication system. RFIC’s hard-tomodel parasitic effects and poor simulation accuracy require multiple trial-and-error tape-outs (fabrications) to meet product specs. Tape-out is very slow (2 months) and very costly (as high as $2M). In the coming 5G era, this problem gets worse as mmWave frequency parasitic effects a ...

    SBIR Phase I 2020 Department of CommerceNational Institute of Standards and Technology
  2. Awayr Security: Validating the NIST Phish Scale Toward Artificial Intelligence Approaches Toward Human Cybersecurity

    SBC: Awayr, Inc            Topic: 90

    Remote operated social engineering (ROSE) attacks account for a surprising share of successful cyberattack. For example, The Verizon Data Breach Incident Response 2019 report found that approximately 94% of all malicious code was introduced into systems via email. Threat actors, illegally, benefit from knowledge gained from repeated massive remote operated social engineering operations. Defensive ...

    SBIR Phase I 2020 Department of CommerceNational Institute of Standards and Technology
  3. Direct Performance Evaluation of Additive Manufacturing Process Plans

    SBC: INTACT SOLUTIONS INC.            Topic: 90

    Additive manufacturing is steadily advancing towards fulfilling its promise of customized and on-demand production of functional parts. However, performance of as-manufactured parts can differ significantly from the as-designed parts because the as-manufactured geometry differs from the as-designed geometry and the as-manufactured material properties are unknown. Attempts to predict performance of ...

    SBIR Phase II 2020 Department of CommerceNational Institute of Standards and Technology
  4. Advanced Interference Mitigation Technologies for Wideband Tactical Radios

    SBC: Metamagnetics Inc.            Topic: SOCOM183002

    Metamagnetics proposes to demonstrate innovative methods of protecting receivers from large interference signals and associated intermodulation distortion (IMD) products. This solution will be applicable to a wide variety of fielded and next-generation tactical communications radios. First, we will conduct a systems study to evaluate the trade space of state-of-the-art (SOTA) hardware and software ...

    SBIR Phase I 2019 Department of DefenseSpecial Operations Command
  5. Daytime Marker

    SBC: Forward Photonics LLC            Topic: SOCOM173001

    There exists a challenge in observing laser designated targets in full daylight conditions for currently fielded near-infrared (NIR) laser designators. The visibility difficulty arises primarily from the significant background signal produced by the sun, which closely mimics the spectral signature of a blackbody . By extending the wavelength region in which laser designators/markers operate into t ...

    SBIR Phase II 2019 Department of DefenseSpecial Operations Command
  6. Developing Silicon Nanowire Sensors to Measuring Host-Cell Proteins at a Biomanufacturing Line

    SBC: Advanced Silicon Group            Topic: None

    Our biosensor is made of silicon nanowire arrays functionalized with antibodies to measure the concentration of specific proteins. In this grant we will take a sensor that has been demonstrated for use in measuring a set of generic host cell proteins and we will apply the sensor to measure a set of proteins for a specific cell line. In doing so, we will demonstrate the utility of our sensor to be ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  7. Direct Performance Evaluation of Additive Manufacturing Process Plans

    SBC: INTACT SOLUTIONS INC.            Topic: None

    Additive manufacturing is steadily advancing towards fulfilling its promise of customized and on-demand production of functional parts. However, performance of as-manufactured parts can differ significantly from the as-designed parts because the as-manufactured geometry differs from the as-designed geometry and the asmanufactured material properties are not known. Attempts to predict performance o ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  8. Developing a robust and scalable calibration approach to low-cost AQ sensing

    SBC: Aerodyne Research, Inc.            Topic: 813

    Poor air quality represents a major public health risk, contributing to an estimated one of every eight deaths worldwide. Low-cost air quality sensors have developed rapidly over the last few years and offer the opportunity to make air quality monitoring widespread at an affordable price. However, low-cost sensors are currently unable to deliver accurate, reliable data due to a lack of understandi ...

    SBIR Phase II 2019 Department of CommerceNational Oceanic and Atmospheric Administration
  9. Development of a Rapid Monitoring System for Detection of Pathogens in Marine Aquaculture

    SBC: InnovaPrep, LLC            Topic: 836

    pathogens in marine aquaculture waters. Phase II research will look to improve sample concentration, cell lysis, and DNA purification techniques that were developed in Phase I. More specifically, optimization of the prototype lysis/elution fluid will be further developed for cell lysis using BSL-1 organisms, Vibrio harveyi, a surrogate for pathogenic Vibrio ssp. Techniques will be developed to ove ...

    SBIR Phase II 2019 Department of CommerceNational Oceanic and Atmospheric Administration
  10. OpenORB Low-Cost Mooring Location Beacon for Costal Applications

    SBC: Triton Systems, Inc.            Topic: 825

    Triton Systems, Inc. proposes development of the Open-Source Oceanographic Asset Recovery Beacon (OpenORB) that will allow the deployment of coastal instrumentation moorings with affordable protection against loss. This open-source kit would significantly reduce the purchase price of a commercial location beacon by allowing the end-user to assemble a customized system with minimal time and effort. ...

    SBIR Phase II 2019 Department of CommerceNational Oceanic and Atmospheric Administration
US Flag An Official Website of the United States Government