List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Direct Performance Evaluation of Additive Manufacturing Process Plans

    SBC: INTACT SOLUTIONS INC.            Topic: None

    Additive manufacturing is steadily advancing towards fulfilling its promise of customized and on-demand production of functional parts. However, performance of as-manufactured parts can differ significantly from the as-designed parts because the as-manufactured geometry differs from the as-designed geometry and the asmanufactured material properties are not known. Attempts to predict performance o ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  2. Developing Silicon Nanowire Sensors to Measuring Host-Cell Proteins at a Biomanufacturing Line

    SBC: Advanced Silicon Group            Topic: None

    Our biosensor is made of silicon nanowire arrays functionalized with antibodies to measure the concentration of specific proteins. In this grant we will take a sensor that has been demonstrated for use in measuring a set of generic host cell proteins and we will apply the sensor to measure a set of proteins for a specific cell line. In doing so, we will demonstrate the utility of our sensor to be ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  3. Measuring the Concentration of Host-cell Proteins in Biomanufacturing Using Silicon Nanowire Array Sensors

    SBC: Advanced Silicon Group            Topic: NA

    Our innovation is a low cost, sensitive, quantitative biosensor that can detect many biomarkers on the same chip. Our sensor consists of vertically aligned silicon nanowires. The silicon nanowires’ high surface area to volume ratio makes them sensitive to the environment around them and can thus lead to high sensitivity detection. Each of the nanowires can be functionalized to be sensitive to ei ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  4. GEOFF: Geo-location from Edges, Objects, Foundational data, and a Filter

    SBC: Scientific Systems Company Inc.            Topic: NGA181007

    Ground vehicles with navigation capability (e.g., GPS) can index into foundation data (e.g., Google Maps) to gain situational awareness abouttheir surroundings. When GPS and RF navigation sources are degraded, maintaining situational awareness requires an alternative navigationsource. One alternative source is the foundation data itself. The data contain objects at known 3D locations, which projec ...

    SBIR Phase I 2018 Department of DefenseNational Geospatial-Intelligence Agency
  5. Generalized Change Detection to Cue Regions of Interest

    SBC: FeatureX, Inc.            Topic: NGA181006

    Generalized change detection is a critical capability to mitigate the need for massive human inspection of the rapidly expanding volume ofglobal overhead satellite imagery. Current optical change detection approaches focus on fully specified systems to detect a predefined set ofchanges, and effective approaches for generalized change detection have not yet been demonstrated. We propose to build a ...

    SBIR Phase I 2018 Department of DefenseNational Geospatial-Intelligence Agency
  6. Absolute Distance Interferometer for Manufacturing Metrology Applications

    SBC: Bridger Photonics, Inc.            Topic: NA

    Bridger Photonics, Inc. proposes to develop an absolute length metrology sensor that will simultaneously provide >1,000 measurements per second, 0.5 m maximum measurement distance. Bridger’s solution is will fill a gap in precision measurement technology for applications that require rapid monitoring of macroscopic distances such as positioning and calibration of surface metrology systems (CMM, ...

    SBIR Phase II 2017 Department of CommerceNational Institute of Standards and Technology
  7. High-Throughput Single-Nanoparticle Magnetic Analysis Platform Using Diamond Magnetic Imaging

    SBC: Quantum Diamond Technologies Inc            Topic: NA

    Magnetic nanoparticles are widely-used tools over a range of industries, but have particularly powerful biomedical applications for clinical and research diagnostics, clinical therapy, and basic life science research. Many of these applications require consistent sources for magnetic nanoparticles with narrow distributions of magnetic properties, but no technology is now commercially available for ...

    SBIR Phase II 2017 Department of CommerceNational Institute of Standards and Technology
  8. Absolute Distance Interferometer for Manufacturing Metrology Applications

    SBC: Bridger Photonics, Inc.            Topic: 90101

    Bridger Photonics, Inc. will develop an absolute length metrology sensor that will simultaneously provide >1,000 measurements per second, 0.5 m maximum measurement distance. Bridger’s solution is will fill a gap in precision measurement technology for applications that require rapid monitoring of macroscopic distances such as positioning and calibration of surface metrology systems (CMM, AFM, SE ...

    SBIR Phase I 2016 Department of CommerceNational Institute of Standards and Technology
  9. High-Throughput Single-Nanoparticle Magnetic Analysis Platform Using Diamond Magnetic Imaging

    SBC: Quantum Diamond Technologies Inc            Topic: 90109

    Magnetic nanoparticles are powerful tools over a wide range of industries, but have particularly powerful biomedical applications for clinical and research diagnostics, clinical therapy, and basic life science research. These applications require consistent sources for magnetic nanoparticles with narrow distributions of magnetic properties, but no technology is now commercially available for manuf ...

    SBIR Phase I 2016 Department of CommerceNational Institute of Standards and Technology
  10. A Category-theoretic Tool for Manufacturing Information Integration

    SBC: CATEGORICAL INFORMATICS, INC.            Topic: 90101

    Category theory has recently been successfully applied to translate information from one computer system to another. Researchers at MIT have developed a prototype software tool based on category theory for solving information-integration programs. The tool has successfully solved small-scale information-integration problems including a problem identified by NIST about enriching the manufacturing s ...

    SBIR Phase II 2016 Department of CommerceNational Institute of Standards and Technology

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government