You are here

Home » Reports

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

Displaying 1 - 10 of 728 results
 
  • Record 1 TO 728

  1. RAMAN COVERTED MID-IR LASER

    SBC: ABIOMED, INC.            Topic: N/A

    N/A

    SBIR Phase I 1985 Department of DefenseArmy

  2. An Active Smart Material System for Buffet Load Alleviation

    SBC: Active Control eXperts, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1993 Department of DefenseAir Force

  3. ACCURATE PASSIVE RANGING TECHNIQUES

    SBC: ADCOM SYSTEMS TECHNOLOGY,INC.            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of DefenseNavy

  4. IMPROVEMENT OF TEST INSTRUMENTATION FOR FILAMENT WOUND STRUCTURES

    SBC: Advanced Composites Labs            Topic: N/A

    SEVERAL TECHNIQUES WHICH HAVE BEEN USED BY ACL TO MEASURE RESPONSE OF BOTH FILAMENT-WOUND AND BRAIDED GLASS, KEVLAR AND GRAPHITE EPOXY COMPOSITE TUBES WILL BE EMPLOYED IN THE INSTRUMENTATION OF A VARIETY OF FILAMENT-WOUND COMPOSITE STRUCTURES. THESE STRUCTURES WILL BE CHOSEN BY ACL AFTER TECHNICAL DISCUSSIONS WITH MICOM PERSONNEL, AND MAY INCLUDE GOVERNMENT FURNISHED STRUCTURES OF PARTICULAR INTER ...

    SBIR Phase I 1989 Department of DefenseArmy

  5. Edge-Defined Film Growth or Stepanov Processing of High-Temperature Fibers for Composites

    SBC: Advanced Crystal Products            Topic: N/A

    N/A

    SBIR Phase I 1993 National Aeronautics and Space Administration

  6. HIGH TEMPERATURE TRIBOMETER

    SBC: Advanced Mechanical Technology, Inc.            Topic: N/A

    A MACHINE TO EVALUATE THE FRICTION AND WEAR PROPERTIES OF MATERIALS AT TEMPERATURES UP TO 1000 DEG C IS PROPOSED. BOTH LUBRICATED AND UNLUBRICATED TESTING WITH LIQUIDS AND SOLIDS WILL BE POSSIBLE USING A PIN-ON-DISC GEOMETRY. COMPLETE CONTROL OVER THE TEST ATMOSPHERE AND MANUAL OR COMPUTER-CONTROL OF ALL VARIABLES WILL BE POSSIBLE DATA ACQUISITION AND STORAGE WILL BE PERFORMED BY COMPUTER. THE TRI ...

    SBIR Phase II 1989 Department of DefenseAir Force

  7. QUANTITATIVE LUBRICATING OIL DEBRIS MONITORING AND ANALYSIS

    SBC: Advanced Mechanical Technology, Inc.            Topic: N/A

    THE OBJECTIVE OF THE PROPOSED PROJECT IS TO EVALUATE THE FEASIBILITY OF AN ON-LINE MONITOR OF OIL CONDITION WHICH WOULD DETECT THE PRESENCE AND NATURE OF DEBRIS PARTICLES IN LUBRICATING OIL SYSTEMS. THIS WOULD PROVIDE A MORE TIMELY AND LESS LABOR INTENSIVE METHOD OF OIL CONDITION MONITORING THAN PRESENT METHODS THAT INVOLVE OFF-LINE ANALYSIS. THE PROPOSED APPROACH WOULD CONSIST OF MEASURING THE FO ...

    SBIR Phase I 1989 Department of DefenseNavy

  8. Diesel-Fired Self-Pumping Water Heater R&D

    SBC: Advanced Mechanical Technology, Inc.            Topic: N/A

    A self-pumping water heater is proposed wherein a small portion of the water to be pumped is evaporated in a boiler and used to pressurize and heat the main stream of water. Unlike early slow direct-acting steam pumps, the proposed approach operates at moderate frequencies and is extremely compact. In Phase I, an analytical model describing the dynamics of the process would be formulated, and a pr ...

    SBIR Phase I 1993 Department of DefenseArmy

  9. COMMUNICATIONS

    SBC: Aes Corp            Topic: N/A

    THE AES CORPORATION HAS DEVELOPED A NOISE PROCESSOR (NP). THE PROCESSOR HAD THE ABILITY TO DETECT A SIGNAL OF KNOWN PULSE WIDTH BURIED DEEP WITHIN THE R.F. NOISE FLOOR OR ELECTRONIC JAMMING. THE COMBINATION OF PROPRIETARY HARDWARE AND SOFTWARE ALLOWS THE NP TO SEARCH FOR A VERY EXACT SIGNAL. THE SIGNAL PARAMETERS ARE PROGRAMMED INTO THE SOFTWARE. THE TWO CONCURRENT PROCESSORS ARRIVE AT THE PROBABI ...

    SBIR Phase I 1985 Department of DefenseAir Force

  10. ELECTRONICALLY-CONTROLLABLE FILTER BASED ON POLYMER DISPERSED LIQUID CRYSTAL MATERIALS

    SBC: AST PRODUCTS, INC.            Topic: N/A

    ELECTRO-OPTIC MATERIALS CONSISTING OF RANDOM DISPERSION OF NEMATIC LIQUID-CRYSTAL MICRODROPLETS EMBEDDED IN AN ISOTROPIC TRANSPARENT POLYMERIC MEDIA (OR POLYMER DISPERSED LIQUID CRYSTALS (PDLC)) WERE DEVELOPED AT ADVANCED SURFACE TECHNOLOGY, INC. (AST) FOR USE IN OPTICAL AND ELECTRO-OPTICAL DEVICES. PDLC MATERIALS CAN BE APPLIED AS A TUNABLE OPTICAL FILTER WHICH CAN RESPOND TO AN ELECTRIC FIELD AN ...

    SBIR Phase II 1993 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government