List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. RAMAN COVERTED MID-IR LASER

    SBC: ABIOMED, INC.            Topic: N/A

    N/A

    SBIR Phase I 1985 Department of DefenseArmy
  2. Electronically Shunted Smart Material Damper Packages for Extreme Environments

    SBC: Active Control eXperts, Inc.            Topic: N/A

    ACX proposes an alternate approach to damping for extreme environments, which uses an electrically shunted, surface mounted, smart material. This shunting approach has been most widely used in less extreme environments in conjunction with piezoceramic materials. The smart material is bonded to the surface of the target structure, in this case a part inside an aircraft engine. Stress on the part ...

    SBIR Phase I 1998 Department of DefenseAir Force
  3. Hybrid Vibration Control Actuator Systems

    SBC: Active Control eXperts, Inc.            Topic: N/A

    Active Control eXperts, (ACX) Inc. proposes to design, fabricate, and demonstrate a novel hybrid vibration ccntrol actuator system capable of very precise, controllable motion. This system will combine the advantages of a capacitive actuator with feedback control capability. This system will possess the force and stroke characteristics of a small hydraulic device and the bandwidth of electric moto ...

    SBIR Phase I 1998 Department of DefenseMissile Defense Agency
  4. Smart, Adaptive Packages for Vibration Suppression

    SBC: Active Control eXperts, Inc.            Topic: N/A

    In many structures with vibration problems, the nature of the problem is uncertain, or varies over time. Thus it is not possible 'a priori to design a linear, time-invariant, (LTI) feedback control law which is guaranteed to meet performance, or possibly even stability requirements over the entire operating range. These applications require an intelligent control system which can adapt to the ch ...

    SBIR Phase I 1998 Department of DefenseAir Force
  5. Jam Resistant GPS Reception

    SBC: ADCOM SYSTEMS TECHNOLOGY,INC.            Topic: N/A

    A unique approach is proposed for the effective rejection of cochannel, but otherwise arbitrary, jamming and other interference in GPS reception. The approach is based on a method of processing a multiplicity of signals sharing the same time-frequency and polarization space, in such a way as to favor a bona fide GPS signal over the others present (jamming, spoofing, multipath, atmospherics or oth ...

    SBIR Phase I 1998 Department of DefenseAir Force
  6. ACCURATE PASSIVE RANGING TECHNIQUES

    SBC: ADCOM SYSTEMS TECHNOLOGY,INC.            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of DefenseNavy
  7. IMPROVEMENT OF TEST INSTRUMENTATION FOR FILAMENT WOUND STRUCTURES

    SBC: Advanced Composites Labs            Topic: N/A

    SEVERAL TECHNIQUES WHICH HAVE BEEN USED BY ACL TO MEASURE RESPONSE OF BOTH FILAMENT-WOUND AND BRAIDED GLASS, KEVLAR AND GRAPHITE EPOXY COMPOSITE TUBES WILL BE EMPLOYED IN THE INSTRUMENTATION OF A VARIETY OF FILAMENT-WOUND COMPOSITE STRUCTURES. THESE STRUCTURES WILL BE CHOSEN BY ACL AFTER TECHNICAL DISCUSSIONS WITH MICOM PERSONNEL, AND MAY INCLUDE GOVERNMENT FURNISHED STRUCTURES OF PARTICULAR INTER ...

    SBIR Phase I 1989 Department of DefenseArmy
  8. HIGH TEMPERATURE TRIBOMETER

    SBC: Advanced Mechanical Technology, Inc.            Topic: N/A

    A MACHINE TO EVALUATE THE FRICTION AND WEAR PROPERTIES OF MATERIALS AT TEMPERATURES UP TO 1000 DEG C IS PROPOSED. BOTH LUBRICATED AND UNLUBRICATED TESTING WITH LIQUIDS AND SOLIDS WILL BE POSSIBLE USING A PIN-ON-DISC GEOMETRY. COMPLETE CONTROL OVER THE TEST ATMOSPHERE AND MANUAL OR COMPUTER-CONTROL OF ALL VARIABLES WILL BE POSSIBLE DATA ACQUISITION AND STORAGE WILL BE PERFORMED BY COMPUTER. THE TRI ...

    SBIR Phase II 1989 Department of DefenseAir Force
  9. QUANTITATIVE LUBRICATING OIL DEBRIS MONITORING AND ANALYSIS

    SBC: Advanced Mechanical Technology, Inc.            Topic: N/A

    THE OBJECTIVE OF THE PROPOSED PROJECT IS TO EVALUATE THE FEASIBILITY OF AN ON-LINE MONITOR OF OIL CONDITION WHICH WOULD DETECT THE PRESENCE AND NATURE OF DEBRIS PARTICLES IN LUBRICATING OIL SYSTEMS. THIS WOULD PROVIDE A MORE TIMELY AND LESS LABOR INTENSIVE METHOD OF OIL CONDITION MONITORING THAN PRESENT METHODS THAT INVOLVE OFF-LINE ANALYSIS. THE PROPOSED APPROACH WOULD CONSIST OF MEASURING THE FO ...

    SBIR Phase I 1989 Department of DefenseNavy
  10. COMMUNICATIONS

    SBC: Aes Corp            Topic: N/A

    THE AES CORPORATION HAS DEVELOPED A NOISE PROCESSOR (NP). THE PROCESSOR HAD THE ABILITY TO DETECT A SIGNAL OF KNOWN PULSE WIDTH BURIED DEEP WITHIN THE R.F. NOISE FLOOR OR ELECTRONIC JAMMING. THE COMBINATION OF PROPRIETARY HARDWARE AND SOFTWARE ALLOWS THE NP TO SEARCH FOR A VERY EXACT SIGNAL. THE SIGNAL PARAMETERS ARE PROGRAMMED INTO THE SOFTWARE. THE TWO CONCURRENT PROCESSORS ARRIVE AT THE PROBABI ...

    SBIR Phase I 1985 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government