Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Development of Innovative Broad-Spectrum Analysis Methods for PFAS

    SBC: SEACOAST SCIENCE, INC.            Topic: 17NCER3A

    This SBIR addresses EPA’s need for improved sampling and analysis technologies to detect Per- and Polyfluoroalkyl Substances (PFAS). PFAS are used in firefighting sprays, at airports, and for wild fires, and have been used in textile treatments (e.g., it is a component in Scotchgard). It is estimated that 65 million Americans are at risk of PFAS exposure in their drinking water. Seacoast propose ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Renewable Bioplastics Production

    SBC: Altex Technologies Corporation            Topic: 17NCER5A

    Altex’s Renewable Bioplastics Production (RBP) technology meets the Greener Plastic Manufacturing needs; to eliminate harmful-petrochemical feed sources, to accomplish toxic-free, low-energy, low cost bioplastics production, to reduce Green House Gas (GHG) emissions, and to have environment friendly-biodegradable bioplastics. Altex’s proposed RBP technology combines a novel feeding-sizing-pret ...

    SBIR Phase I 2018 Environmental Protection Agency
  3. Greener Plastics with High Heat Tolerance for Additive Manufacturing

    SBC: Intelligent Optical Systems, Inc.            Topic: 17NCER5B

    Advances in materials and automation are rapidly reshaping the American manufacturing economy. These advances must be embraced to sustain a strong manufacturing sector in the United States. Additive manufacturing is possibly the fastest growing example of this trend, growing at an astonishing compound annual growth rate of 25.7%. The plastic materials market for additive manufacturing, valued at $ ...

    SBIR Phase I 2018 Environmental Protection Agency
  4. Indoor Formaldehyde Detection by a Low-Cost Chemical Sensor Based on Organic Nanofibers

    SBC: Vaporsens, Inc.            Topic: 16NCER1A

    Need: People are exposed to formaldehyde, a carcinogen found in building materials. Highly sensitive, real-time formaldehyde sensors would improve human safety by alerting users to harmful concentrations. _x000D_ _x000D_ Technical Feasibility: Vaporsens produces chemical sensors based on novel organic nanofiber technology. Phase 1 results demonstrated high selectivity, rapid-response time, and dem ...

    SBIR Phase II 2018 Environmental Protection Agency
  5. Inexpensive Formaldehyde Sensors for Indoor Air Quality (IAQ) Applications

    SBC: Giner, Inc.            Topic: 16NCER1A

    Recognizing the need to monitor formaldehyde gas in residential and industrial buildings,_x000D_ Giner, Inc. (Giner) will continue the successful work started in Phase I and will develop,_x000D_ fabricate and demonstrate a formaldehyde gas monitor that is capable of continuously_x000D_ measuring formaldehyde in the range of 0-2000 parts per billion (ppb) with a resolution of 10 ppb. The wireless c ...

    SBIR Phase II 2018 Environmental Protection Agency
  6. A GREEN AND UNIQUE THERMOSETTING-THERMOPLASTIC POLYCARBONATE

    SBC: INSTRUMENTAL POLYMER TECHNOLOGIES, LLC            Topic: 16NCER2B

    Of the 300 million tons of plastic produced per year most will require 500 years to biodegrade. Currently only 9% is recycled, and 50 million tons of thermoset plastic produced annually that can't be recycled. _x000D_ _x000D_ This project will develop a sustainable and easily biodegradable polycarbonate plastic that is uniquely a recyclable thermoset resin. We call it a thermosetting thermoplastic ...

    SBIR Phase II 2018 Environmental Protection Agency
  7. Reverse Engineering- Light, Dome: NIIN 015639517

    SBC: Breault Research Organization, Inc.            Topic: DLA171002

    The trend over the last several years is fewer businesses supplying manufactured products. Thus, by supply and demand, the cost of military hardware has increased with less competition. Furthermore, amortized cost of the qualifying a new product becomes cost prohibited resulting in non-competitive bids compared to historical averages. DLAs Replenishment Parts Purchase or Borrow program supports re ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  8. Reverse Engineering Technical Data Packages for Development of Alternate Sources of Supply for DLA NSNs

    SBC: SAN DIEGO COMPOSITES, INC.            Topic: DLA171002

    San Diego Composites, Inc. (SDC) will provide the Defense Logistics Agency (DLA) qualified environmentally stable composite (ESC) replacement parts as an alternative source of supply for the parts on the DLA published Land and Maritime Replenishment Parts Purchase or Borrow and Limited Source Candidate Parts lists. SDCs ESC parts can be produced up to 75% faster, require up to 98% less preventativ ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  9. Develop Alternate Source of Supply for NSN 6130-015487556 Battery Charger

    SBC: Spectral Labs Incorporated            Topic: DLA171002

    During Phase I, Spectral labs proposes using our multi-disciplined engineering, quality assurance, and production staff to reverse engineer an NSN 6130-015487556 Battery Charger, P/N RF-5853-CH106 in order to become an approved source. We will prepare a Source Approval Request (SAR) which includes a complete Technical Data Package and Test Plans. Following established ISO 9001 certified processes, ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  10. Increase Competition through Small Business Source Approval Aircraft Launch and Recovery Equipment (ALRE) Critical Safety/Critical Application Items (CSI/CAI)

    SBC: Nextgen Aeronautics, Inc.            Topic: DLA172001

    NextGen Aeronautics (NextGen) is proposing to develop and submit Source Approval Requests (SARs) to increase competition for the manufacture and delivery of Aircraft Launch and Recovery Equipment (ALRE). The DLA has identified critical ALRA NSNs that are sourced by fewer than two manufacturers, limiting availability and competition. NextGen is a proven designer/manufacturer of high-complexity part ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government