Award Data

In this work, Freedom Photonics will team with University of California, Santa Barbara to develop a hybrid integration platform that integrates yielded, best-of-breed active optical components with low-cost, high functionality Silicon Photonics components in a manner that is compatible with foundry fabrication (such as AIM Photonics). This will be performed in a highly manufacturable manner, using ...

A series of RDT&E activities is proposed to create and demonstrate a reconfigurable, autonomous flight controller for the Aircraft for Distributed Electric Propulsion Throttle-based Flight Control (ADEPT-FC) which was designed and built in Phase I, a 33 lb remote controlled aircraft featuring eight overwing electric ducted fans (EDFs) distributed spanwise along the wing’s trailing edge. The prop ...

To support development at NASA’s Stennis Space Center (SSC) testing facilities and infrastructure for the monitoring of remote or inaccessible measurement locations, American GNC Corporation (AGNC) and Rensselaer Polytechnic Institute (RPI) have developed the Through Wall Wireless Intelligent Sensor and Health Monitoring (TWall-ISHM) System. This technology allows deploying flexible instrumentat ...

DISCUS is a generic Guidance, Navigation and Control (GNC) system for swarms of SmallSats. It integrates communications and relative localization with innovative Density Control Algorithms (DCA) enabling robust operation in a variety of uncertain environments. As such, it presents a key enabling technology for future Deep Space missions including space apertures at Lagrangian points, and orbiting ...

PCKA is partnering with researchers at Purdue University to develop an Autonomous Power Controller (APC) for mission-critical microgrids to supply electric power in a highly autonomous and secure manner to accomplish mission objectives. The APC consists of a centralized controller connected to an array of local component controllers. The centralized controller will be capable of optimal generation ...

.The growing interest in CubeSat swarm and constellation systems by NASA, the Department of Defense and commercial ventures has created a need for self-managed inter-satellite networks capable of handling large amount of data while simultaneously precisely synchronizing time and measuring the distances between the spacecraft. CrossTrac Engineering, Inc., in cooperation with our partners Professor ...

The QIF standard shows the promise of offering an environment where best-in-class metrology applications can be linked to yield solutions that are automated, optimized, adaptive, and traceable, maintaining the agility required to ensure U. S. global competitiveness. While the QIF standard has reached a substantial level of comprehensiveness and maturity, the embodiment of the standard in actual, c ...

Network measurement is a critical element in networks but it has largely been an afterthought and inadequately secured. With the emergence of Information-Centric Networking technologies, specifically the popular open source Named-Data Networking (NDN), there is the early stage opportunity to create a useful and flexible network measurement system that can accommodate a range of network probes. Thi ...

This Phase II SBIR project will continue the development of an optical sorter that will be used to estimate drop sizes in sprays. The optical sorter will determine the size of drops in the 0.1 to 10 microns range. Drops in this size range are prevalent in the automobile industry, where the fuel injection pressures have increased tremendously over the past two decades. These newer injectors provide ...

Our innovation is a low cost, sensitive, quantitative biosensor that can detect many biomarkers on the same chip. Our sensor consists of vertically aligned silicon nanowires. The silicon nanowires’ high surface area to volume ratio makes them sensitive to the environment around them and can thus lead to high sensitivity detection. Each of the nanowires can be functionalized to be sensitive to ei ...