You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Capacitive removal of PFOA and PFOS from Drinking Water

    SBC: MAINSTREAM ENGINEERING CORP            Topic: 17NCER1A

    Polyfluoroalkyl and perfluoroalkyl compounds (PFCs) have been used commercially since the 1940’s due to their high level of chemical stability, almost frictionless surface or waterproofing characteristics. Elevated levels of PFCs have been linked to cancer and other health problems including reproductive and developmental risks. PFOA and PFOS are amongst the most prevalent of the PFCs with low l ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Development of Innovative Broad-Spectrum Analysis Methods for PFAS

    SBC: SEACOAST SCIENCE, INC.            Topic: 17NCER3A

    This SBIR addresses EPA’s need for improved sampling and analysis technologies to detect Per- and Polyfluoroalkyl Substances (PFAS). PFAS are used in firefighting sprays, at airports, and for wild fires, and have been used in textile treatments (e.g., it is a component in Scotchgard). It is estimated that 65 million Americans are at risk of PFAS exposure in their drinking water. Seacoast propose ...

    SBIR Phase I 2018 Environmental Protection Agency
  3. Greener Plastics with High Heat Tolerance for Additive Manufacturing

    SBC: INTELLIGENT OPTICAL SYSTEMS, INC.            Topic: 17NCER5B

    Advances in materials and automation are rapidly reshaping the American manufacturing economy. These advances must be embraced to sustain a strong manufacturing sector in the United States. Additive manufacturing is possibly the fastest growing example of this trend, growing at an astonishing compound annual growth rate of 25.7%. The plastic materials market for additive manufacturing, valued at $ ...

    SBIR Phase I 2018 Environmental Protection Agency
  4. Indoor Formaldehyde Detection by a Low-Cost Chemical Sensor Based on Organic Nanofibers

    SBC: Vaporsens, Inc.            Topic: 16NCER1A

    Need: People are exposed to formaldehyde, a carcinogen found in building materials. Highly sensitive, real-time formaldehyde sensors would improve human safety by alerting users to harmful concentrations. _x000D_ _x000D_ Technical Feasibility: Vaporsens produces chemical sensors based on novel organic nanofiber technology. Phase 1 results demonstrated high selectivity, rapid-response time, and dem ...

    SBIR Phase II 2018 Environmental Protection Agency
  5. Inexpensive Formaldehyde Sensors for Indoor Air Quality (IAQ) Applications

    SBC: GINER INC            Topic: 16NCER1A

    Recognizing the need to monitor formaldehyde gas in residential and industrial buildings,_x000D_ Giner, Inc. (Giner) will continue the successful work started in Phase I and will develop,_x000D_ fabricate and demonstrate a formaldehyde gas monitor that is capable of continuously_x000D_ measuring formaldehyde in the range of 0-2000 parts per billion (ppb) with a resolution of 10 ppb. The wireless c ...

    SBIR Phase II 2018 Environmental Protection Agency
  6. A GREEN AND UNIQUE THERMOSETTING-THERMOPLASTIC POLYCARBONATE

    SBC: INSTRUMENTAL POLYMER TECHNOLOGIES, LLC            Topic: 16NCER2B

    Of the 300 million tons of plastic produced per year most will require 500 years to biodegrade. Currently only 9% is recycled, and 50 million tons of thermoset plastic produced annually that can't be recycled. _x000D_ _x000D_ This project will develop a sustainable and easily biodegradable polycarbonate plastic that is uniquely a recyclable thermoset resin. We call it a thermosetting thermoplastic ...

    SBIR Phase II 2018 Environmental Protection Agency
  7. Renewable Bioplastics Production

    SBC: ALTEX TECHNOLOGIES CORPORATION            Topic: 17NCER5A

    Altex’s Renewable Bioplastics Production (RBP) technology meets the Greener Plastic Manufacturing needs; to eliminate harmful-petrochemical feed sources, to accomplish toxic-free, low-energy, low cost bioplastics production, to reduce Green House Gas (GHG) emissions, and to have environment friendly-biodegradable bioplastics. Altex’s proposed RBP technology combines a novel feeding-sizing-pret ...

    SBIR Phase I 2018 Environmental Protection Agency
  8. ViA-ML: A Machine Learning backed Visualization Assistant

    SBC: SCIENTIFIC SYSTEMS CO INC            Topic: OSD13LD1

    With the proliferation of cheap sensors, reduction in storage costs and the ubiquity of communication networks, Cyber-Physical Systems are collecting and storing data at an unprecedented rate. Analysis of such large databases is necessary to find relevant information and improve the efficiency of the Cyber Physical System. The goal of an analysis tool, simply put is to find the most interesting in ...

    SBIR Phase I 2014 Department of DefenseOffice of the Secretary of Defense
  9. Advanced Heavy Fuel Injection System for UAS/UGS Applications

    SBC: MAINSTREAM ENGINEERING CORP            Topic: OSD13PR1

    Mainstream Engineering will use state-of-the-art technology and manufacturing processes to develop an innovative, high speed, lightweight fuel injection system capable of providing multiple injections per engine cycle at engine speeds up to 6000 RPM. To overcome the barriers associated with spark ignition of direct-injected heavy fuel (JP5, JP8, etc.), Mainstream will leverage previous internal re ...

    SBIR Phase I 2014 Department of DefenseOffice of the Secretary of Defense
  10. Improved Turbo/Superchargers for UAS/UGS Application

    SBC: Florida Turbine Technologies Inc.            Topic: OSD13PR5

    Florida Turbine Technologies proposes an oil-free bearing shaft support system for an Unmanned Aerial System (UAS) internal combustion (IC) engine turbocharger. During the course of Phase 1, FTT will design a light-weight high performance UAS turbocharger for IC engines in the 150 horsepower class. A conceptual design of the turbocharger system capable of providing sufficient boost pressure wil ...

    SBIR Phase I 2014 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government