You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Field-deployable Measurement of Fluorocarbons in Water

    SBC: MAINSTREAM ENGINEERING CORP            Topic: 18NCER1B

    Perfluoroalkyl substances (PFASs) have been identified as a serious health contaminant in water at levels between 12 and 516 parts per trillion by the Agency for Toxic Substances & Disease Registry. In 2016, the EPA set a lifetime health advisory of 70 parts per trillion for two PFASs, perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS). These compounds come from a variety of so ...

    SBIR Phase I 2019 Environmental Protection Agency
  2. Rapid Field Trace Detection of Perfluoroalkyl Substance in Water

    SBC: 2W ITech LLC            Topic: 18NCER1B

    Due to increasing concerns over long-term effects of PFOS and PFAS on human body, health based values were set by regulatory authoritative bodies for drinking water standard. Currenty lab-based PFOA and PFOS water tests cost $200-$300 per sample with a turnaround time of 2-3 weeks. In this program, 2W iTech LLC proposes to develop a low-cost fieldable sensing technology for detecting trace amounts ...

    SBIR Phase I 2019 Environmental Protection Agency
  3. Block Copolymer Membranes for Total Removal of Ionic and Nonionic PFAS from Industrial Wastewaters Optionally Co-Contaminated by Alcohols

    SBC: ANFIRO, INC.            Topic: 18NCER1C

    The EPA aims to reduce the total concentration of PFAS in industrial wastewater to

    SBIR Phase I 2019 Environmental Protection Agency
  4. Aqueous Electrostatic Concentrator to Remove Per- and Poly-fluoroalkyl Substances from Water

    SBC: BioLargo, Inc.            Topic: 18NCER1C

    This proposal addresses the need for a pre-treatment technology to remove per- and poly- fluoroalkyl substances (PFAS) from industrial wastewaters. Phase I involves the design, build and testing of a novel technology to remove PFAS from water, termed the Aqueous Electrostatic Concentrator (AEC). This technology will be tested as an electrical bench-scale device that concentrates PFAS through selec ...

    SBIR Phase I 2019 Environmental Protection Agency
  5. Ultralow Power Sensor Package for Ground Level Air Pollution Levels from Wildland Fires

    SBC: KWJ ENGINEERING INC            Topic: 18NCER2A

    Wild fires produce significant air pollution, posing health risks to first responders, residents in nearby areas, and downwind communities. Wildfires are increasing in size and intensity, and the fire season is growing longer. Technologies for measuring air pollutants, including particulates, carbon monoxide, nitrogen dioxide, and carbon dioxide, over the wide range of levels expected in areas dow ...

    SBIR Phase I 2019 Environmental Protection Agency
  6. Black Carbon and UV Particulate Matter, Multi-gas, Multi-pollutant Sensor Platform

    SBC: MICROAETH CORPORATION            Topic: 18NCER2A

    As forest fires are increasing in prevalence and intensity there is a need for miniaturized, lower cost, and easily portable air sensors that provide information to first responders, public health managers and communities so informed, timely decisions can be made. PM2.5 is an accepted standard for particulate matter (PM) measurements, but PM2.5 mass measurements cannot identify sources without ana ...

    SBIR Phase I 2019 Environmental Protection Agency
  7. Remote Air Quality Reporting (RAQR) Device

    SBC: INTELLISENSE SYSTEMS INC            Topic: 18NCER2A

    The Environmental Protection Agency (EPA) is seeking a ground-level air-quality monitoring device to measure wildland fire pollutants including carbon monoxide, carbon dioxide, nitrogen dioxide, and particulates, in a small, easy-to-use unit capable of data storage and data viewing. As more frequent wildfires are expected to occur near populated areas, air-quality monitoring will be more persisten ...

    SBIR Phase I 2019 Environmental Protection Agency
  8. The NODE biosensor: real-time contaminant detection in stormwater

    SBC: Microbiome Engineering, LLC.            Topic: 18NCER4A

    Stormwater management is a growing challenge across the country. Water quality standards are becoming increasingly strict as new regulations are developed at the state level. Meanwhile, changing land use and greater urbanization make meeting these standards even more difficult. Currently, stormwater samples are collected in the field and analyzed in the lab, a process which is time-consuming, cost ...

    SBIR Phase I 2019 Environmental Protection Agency
  9. CDD-SORT: A Next-Generation System to Detect Hazardous & Recyclable Materials in Discarded C&D Debris

    SBC: PTP Strategy LLC            Topic: 18NCER6A

    The Construction and Demolition Debris Support Vector Machine Optical Recycling Technology (CDDSORT) is our proposed system that detects hazardous, problematic, and recyclable components in the 150+ million tons of construction and demolition (C&D) debris discarded annually at US landfills and recycling facilities. Our system and technology leverages a combination of emerging computer vision techn ...

    SBIR Phase I 2019 Environmental Protection Agency
  10. Greener Plastics with High Heat Tolerance for Additive Manufacturing

    SBC: INTELLIGENT OPTICAL SYSTEMS, INC.            Topic: 18NCERP2

    Advances in materials and automation are rapidly reshaping the American manufacturing economy, and must be embraced to sustain a strong manufacturing sector in the United States. Additive manufacturing is possibly the fastest growing example of this trend, growing at an astonishing compound annual growth rate of 25.7%. The plastic materials market for additive manufacturing, valued at $700M in 202 ...

    SBIR Phase II 2019 Environmental Protection Agency
US Flag An Official Website of the United States Government