You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
3D Tomographic Scanning Microwave Microscopy with Nanometer Resolution
SBC: Alcatera Inc. Topic: A17AT008Scanning probe microscopy (SPM) is a technique used to detect near-field interaction when a sample is rater-scanned by a probe. Example include atomic force microscope (AFM) and scanning tunneling microscope (STM). It offers nanometric and atomic image resolution. In this field, an emerging technique, Near-Field Scanning Microwave Microscopy (SMM), utilizes microwave evanescent waves to attain the ...
STTR Phase II 2018 Department of DefenseArmy -
Low-Loss Commercial Deposition Technology for Thick Ferrites and Ferrite/Insulator Films on Printed Circuit Boards
SBC: WINCHESTER TECHNOLOGIES LLC Topic: A16020Integration of RF ferrites on printed circuit boards (PCBs) is highly desired for realizing compact, lightweight and low-cost systems with different RF ferrite components, including inductors, antennas and antenna arrays, etc. However, it has been challenging to integrate ferrites on PCBs. Spin spray deposition can produce fully dense, high crystalline quality, and low-loss RF ferrites at a low te ...
STTR Phase II 2018 Department of DefenseArmy -
Multiple Hit Performance of Small Arms Protective Armor
SBC: TRANSPARENT ARMOR SOLUTIONS INC. Topic: A14AT017Our nation’s warfighters require advanced armor to give them the best protection while allowing mobility to perform their missions. This proposal will develop two powerful tools to aid future body armor advancements. First, this research program will develop a statistical analysis software that will predict likelihood of impacts based on defined attack scenarios (i.e. rifle, distance and firing ...
STTR Phase II 2018 Department of DefenseArmy -
Biologically-Derived Targeted Antimicrobials for Textile Applications
SBC: GINER INC Topic: A14AT012Antimicrobial treatment of military textile systems is intended to provide enhanced protection to the Warfighter in the field by preventing colonization of harmful bacteria that cause various skin and soft tissue infections (SSTI) such as impetigo, boils, abscesses, cellulitis and life-threatening necrotizing fasciitis. Current treatments can impart antimicrobial functionality to textiles; however ...
STTR Phase II 2018 Department of DefenseArmy -
TW Mid-Infrared Laser
SBC: POLARONYX INC Topic: A17042Based on our success in developing several the world’s first commercial high energy femtosecond fiber laser system and OPA systems, PolarOnyx propose, for the first time, a compact fiber laser pumped high energy mid-wave infrared laser to meet with the requirement of the Army solicitation A17-042. The laser is a hybrid fiber/solid state laser based MOPA incorporating our proprietary technology o ...
SBIR Phase II 2018 Department of DefenseArmy -
Atomic Layer Deposition of Highly Conductive Metals
SBC: RADIATION MONITORING DEVICES, INC. Topic: A17AT001Novel photonic structures, such as periodic metal-dielectric photonic bandgap structures (MDPBG) have the potential to revolutionize the field of optical windows. The large mismatch in the permittivities of the metal and dielectric creates resonant tunneling, which allows for high transmission in regions where metals are typically opaque. This property makes MDPBGs very attractive for screening or ...
STTR Phase II 2018 Department of DefenseArmy -
Novel Detection Sensor for Small Arms Projectile Motion
SBC: SA PHOTONICS, LLC Topic: A17128Testing of light and medium caliber weapons requires accurate measurement of position at the intersection of projectile trajectory and a designated vertical target plane.The distance from the weapon test site to the target plane extends out to 2500 m for some munitions.As range increases the area over which projectile position can be measured must also increase.The modular Projectile Impact Measur ...
SBIR Phase I 2018 Department of DefenseArmy -
Next Generation Aviation Helmet Mounted Display
SBC: SA PHOTONICS, LLC Topic: A18089Army helicopter pilots have a very challenging job that requires a high level of situational awareness.Although many fighter jet HMDs (F-35 JSF, JHMCS) use off the visor optics, helicopter HMDs almost always use an optical system that puts some part of the optics in front of the pilots eyes, like in the Apache IHADSS HMD.For this system, much of the downlook on the right side of the helicopter is ...
SBIR Phase I 2018 Department of DefenseArmy -
High Dynamic Range Heterodyne Terahertz Imager
SBC: LONGWAVE PHOTONICS LLC Topic: A17AT007The Tunable Active HEterodyne Terahertz Imager (TAHETI) system will use Terahertz Quantum-Cascade Lasers (QCL) combined with a Schottky diode detector for ultra-high dynamic range heterodyne imaging. Distributed feedback (DFB) QCLs with milliwatt power levels are engineered to emit at slightly offset frequencies, and are used as local oscillator and illumination for imaging. The QCLs will be down ...
STTR Phase II 2018 Department of DefenseArmy -
Reconfigurable All-Solid-State Lidar System
SBC: Physical Optics Corporation Topic: A17113To address the U.S. Army need for a compact, low cost, solid-state Lidar system, Physical Optics Corporation (POC) proposes to develop a new Reconfigurable All-Solid-State Lidar (RASS) system. The system is based on innovative use of electro-optical crystals for high-speed nonmechanical beam steering combined with a 1550 nm laser which is invisible to night vision googles, thus providing real-time ...
SBIR Phase I 2018 Department of DefenseArmy