You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. High specific power and cost effective solar array for spacecraft, lighter than air vehicles, and UAVs

    SBC: VectorSum Inc            Topic: AF13AT06

    ABSTRACT: Space solar power systems range in size from the International Space Station with 8 solar arrays producing 84,000 watts all the way down to body-mounted single wafers on individual cubesats. The current state-of-the-art relies on multi-junction gallium arsenide or inverted metamorphic cells affixed to rigid structural panels. The need for a low-mass, high energy output solar array for ...

    STTR Phase I 2014 Department of DefenseAir Force
  2. Development of light-weight, low-cost and high specific power organic solar modules with high radiation hardness

    SBC: SOLARMER ENERGY, INC.            Topic: AF13AT06

    ABSTRACT: Solar arrays play a key role in the operation of spacecrafts and unmanned aerial vehicles. Traditionally, inorganic semiconductor based solar arrays have been used for space applications because of their highest efficiencies. However, these solar arrays have several major limitations like extremely high cost, low specific power and large stowage volume. Organic photovoltaic (OPV) module ...

    STTR Phase I 2014 Department of DefenseAir Force
  3. Embedded Self-repairing Antenna Composite (ESAC)

    SBC: NEXTGEN AERONAUTICS, INC.            Topic: A13AT012

    The goal of the proposed research is to develop self-healing embedded communication antennas to be used in transparent armori.e., ground vehicle windows. Embedded antennas are known to delaminate from their host structures after impact; this allows an empty space to form around the antenna and as a result detunes the antenna. A sandwich structure will be designed, fabricated, and tested whereby th ...

    STTR Phase I 2014 Department of DefenseArmy
  4. Mesh Generation and Control for Moving Boundary Problems

    SBC: HYPERCOMP INC            Topic: A12aT012

    In this STTR project we aim to build software interfaces and enhancements to existing parallel mesh adaptation libraries for applications in high performance flow modeling. In Phase-I we demonstrated a preliminary implementation of such a system and identified technology needs. Phase-II development will include both open source, as well as commercially supported mesh adaptation software and interf ...

    STTR Phase II 2014 Department of DefenseArmy
  5. Joint Transport and Routing Optimization for Adaptive Satellite Networks

    SBC: UTOPIACOMPRESSION,CORPORATION            Topic: AF11BT12

    ABSTRACT: Due to increasing communications demand for tactical mission operations force the DoD to initiative to migrate the existing circuit-switched, bent-pipe satellite communication systems to the onboard packet switched satellite systems using Internet Protocols. The new approach offers significant flexibility and performance gain, but there are still tough challenges, e.g., high bit error r ...

    STTR Phase II 2014 Department of DefenseAir Force
  6. Advanced Wavelength Tuners for Chem-Bio Detection Lasers

    SBC: LFK Technology Corp.            Topic: A11aT024

    Several laser types are in development by the government for advanced proximal sensors, including the quantum cascade laser, the miniature solid state laser with optical parametric oscillator and the miniature CO2 gas laser. The enabling critical component for all these advanced transmitters is the compact, robust, rapid, precision wavelength selector. It is proposed to develop and deliver a sta ...

    STTR Phase II 2014 Department of DefenseArmy
  7. Real Time 3-D Modeling and Immersive Visualization for Enhanced Soldier Situation Awareness

    SBC: Carnegie Robotics LLC            Topic: A12aT003

    We propose a rapid mapping and 3-D visualization system especially suited for inside buildings, tunnels, urban canyons, and other environments where GPS may be poor or not available. The system--which was fully demonstrated in our Phase I effort-- includes mobile Sensor Nodes that wirelessly supply compressed 3D range data and color imagery to a central Fusion Node. The Fusion Node runs 3D recon ...

    STTR Phase II 2014 Department of DefenseArmy
  8. Scale up of EO polymers and their utilization in novel nano-imprinted sub-wavelength waveguide-based Modulators and Arrays

    SBC: TIPD LLC            Topic: AF11BT01

    ABSTRACT: The Phase II technical objectives follow directly from the Phase I effort, where all tasks necessary for RF photonic receiver fabrication were demonstrated. The Phase II effort will pursue two major objectives: 1) further development of SEO100 EO polymer based chips, packaged devices and arrays in collaboration with University of Dayton (antenna designs), taking advantage of multiphoto ...

    STTR Phase II 2014 Department of DefenseAir Force
  9. Transition to the Next Generation High Power Phased Array Transceivers

    SBC: G. A. Tyler Associates, Inc.            Topic: AF12BT13

    ABSTRACT: Given the results obtained in the Phase I effort, we are now in a position to advance to the next generation of High Power Phased Array Transceiver Systems. The new approach proposed here is to use enough elements in the phased array to ensure that significant wavefront compensation performance can be obtained with only piston commands. A system of this nature can be developed in two ...

    STTR Phase II 2014 Department of DefenseAir Force
  10. Low Loss, High Average Power PM WDMs for Raman Fiber Lasers

    SBC: POLARONYX INC            Topic: AF13AT03

    ABSTRACT: We propose a new fiber WDM fabrication method for single mode high power fiber laser. Our new approach will enable kW operation for both single mode fiber WDM and PCF WDM. At the end of Phase I, a proof of concept experiment will be demonstrated. In phase II, we will target at delivery of a reliable prototypes for both step index fiber WDM and PCF WDM. BENEFIT: The WDM is a key compon ...

    STTR Phase I 2014 Department of DefenseAir Force
US Flag An Official Website of the United States Government