You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Deep ultraviolet laser for Raman spectroscopy

    SBC: TIPD, LLC            Topic: A11aT005

    The Phase II program proposes to commercialize frequency quadrupling technology developed in the College of Optical Sciences at the University of Arizona to build a 244 nm UV frequency quadrupled optically pumped semiconductor laser (FQ-OPSL). The laser will provide a self-contained small footprint (

    STTR Phase II 2012 Department of DefenseArmy
  2. Electroless Plating of Indium Bumps for High Operating Temperatures (HOT) Mid-Wave (MW) Sensors

    SBC: EnerGaia            Topic: A12039

    Advanced hybrid packaging for MWIR FPA devices has considerable challenges in terms of increasing pixel density. These processes are based on Indium bumping; however, the current approach to deposition has scaling and cost issues. EnerGaia has a technology based on acoustic electroless deposition which can meet these requirements. Ultrasonic energy coupled to a plating solution has been proven ...

    SBIR Phase I 2012 Department of DefenseArmy
  3. Low Cost Cockpit head tracking and gestural recognition

    SBC: KUTTA TECHNOLOGIES, INC.            Topic: A12078

    This proposal offers a solution for the development of a revolutionary new, low-cost, human machine interface for aviators. In this endeavor, Kutta and its partners design and develop an innovative concept that leverages commercial off the shelf (COTS) hardware and software. The well-structured applied research Work Plan overcomes some of the known issues with the Kinect and other COTS gaming tech ...

    SBIR Phase I 2012 Department of DefenseArmy
  4. Residual Property Prediction for Damage Composite Structures

    SBC: GLOBAL ENGINEERING RESEARCH AND TECHNOLOGIES, LLC            Topic: A12083

    During a components service life, damage due to high or low energy impact may be introduced, which may lead to premature failure of these structures. Component level structural testing and analysis of advanced composites is prohibitively expensive and time consuming. Instead, using robust and accurate computational tools complemented by experiments at key stages is a viable and cost-effective opti ...

    SBIR Phase I 2012 Department of DefenseArmy
  5. Laser Vibrometry Detection of SBIEDs

    SBC: Photonics Applications, LLC            Topic: A10120

    The objective of this effort is to design and build and test a prototype laser interferometric sensor system for the detection of suicide bombers, burried IEDs and buried land mines.

    SBIR Phase II 2012 Department of DefenseArmy
  6. Comprehensive Latency Mitigation in EOIR Sensor Controls

    SBC: KUTTA TECHNOLOGIES, INC.            Topic: A11072

    Kutta proposes multiple solutions for the development of different Latency Improvement Algorithms and Latency Estimation Algorithms for the control of Electro Optical and Infrared (EO/IR) payloads onboard Unmanned Aerial Vehicles (UAVs). Numerous innovative concepts to improve EO/IR payload control when latency in the control systems reaches as high as five seconds are recommended. The Work Plan c ...

    SBIR Phase I 2012 Department of DefenseArmy
  7. Ground Guidance: Load-Based Mission Planning

    SBC: Primordial, Inc.            Topic: A11129

    Army small unit leaders face complex tradeoffs when selecting equipment and routes for a mission. Mnemonics such METT-TC and OAKOC summarize many of the factors that soldiers consider, but quickly and comprehensively analyzing these elements is challenging. That is where Primordial"s flagship product, Ground Guidance, comes in. Ground Guidance is patented, fielded software developed under contr ...

    SBIR Phase I 2012 Department of DefenseArmy
  8. Aviator Mission Tasker of Distributed Unmanned Assets

    SBC: KUTTA TECHNOLOGIES, INC.            Topic: A11131

    Kutta Technologies proposes development of an Aviator Mission Tasker Toolkit (AMTT) which affords users the ability to drag and drop logical agent-based features to create a Manned/Unmanned Teaming (MUM-T) application that will interface with modern avionics systems and provide for multi-vehicle unmanned systems control with low cognitive workload. To engineer the system, Kutta teams with world-re ...

    SBIR Phase I 2012 Department of DefenseArmy
  9. Comprehensive Latency Mitigation in EOIR Sensor Controls

    SBC: KUTTA TECHNOLOGIES, INC.            Topic: A11072

    In Phase I, Kutta hypothesized multiple Latency Improvement Algorithms (LIAs) for the control of Electro-Optical and Infrared payloads onboard Unmanned Aerial Vehicles. Through an extensive human factors study within a representative simulated environment, Kuttas researchers proved their hypotheses and, in many cases, saw a 50% or more improvement in effectiveness among the participants. In Phase ...

    SBIR Phase II 2012 Department of DefenseArmy
  10. Volume and Weight Reduction Method for Intermediate Moisture Ration Components and Snacks

    SBC: Creative Resonance Inc.            Topic: A11046

    The need to develop an alternative technology to those that dominate the snack food industry has become apparent over the last decade. Quality, nutrition, functionality, health considerations articulated by the consumers coupled to efficiency, low energy requirements, low asset base, small process footprint, etc. highly desired by manufacturers have constantly reinforced this need stimulating few ...

    SBIR Phase II 2012 Department of DefenseArmy
US Flag An Official Website of the United States Government