List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Absolute Distance Interferometer for Manufacturing Metrology Applications

    SBC: Bridger Photonics, Inc.            Topic: NA

    Bridger Photonics, Inc. proposes to develop an absolute length metrology sensor that will simultaneously provide >1,000 measurements per second, 0.5 m maximum measurement distance. Bridger’s solution is will fill a gap in precision measurement technology for applications that require rapid monitoring of macroscopic distances such as positioning and calibration of surface metrology systems (CMM, ...

    SBIR Phase II 2017 Department of CommerceNational Institute of Standards and Technology
  2. Absolute Distance Interferometer for Manufacturing Metrology Applications

    SBC: Bridger Photonics, Inc.            Topic: 90101

    Bridger Photonics, Inc. will develop an absolute length metrology sensor that will simultaneously provide >1,000 measurements per second, 0.5 m maximum measurement distance. Bridger’s solution is will fill a gap in precision measurement technology for applications that require rapid monitoring of macroscopic distances such as positioning and calibration of surface metrology systems (CMM, AFM, SE ...

    SBIR Phase I 2016 Department of CommerceNational Institute of Standards and Technology
  3. Atmospheric Characterization for Directed Energy Applications

    SBC: Anasphere, Inc            Topic: MDA12017

    Atmospheric refractive index fluctuations directly impact the propagation of laser beams through the atmosphere. A key parameter of interest to be directly acquired or derived from atmospheric measurements is the refractive index structure parameter CN2. Atmospheric refractive index, and therefore CN2, can theoretically be derived as a function of temperature, humidity, and pressure measurements ...

    SBIR Phase I 2013 Department of DefenseMissile Defense Agency
  4. Low-Cost Integrated Valve/Injectors for Bipropellant Thrusters

    SBC: BLAINE WRIGHT, INC.            Topic: MDA05067

    The most significant hardware costs on a missile interceptor propulsion system are associated with the thrusters, for which there are typically four divert thrusters and four, six, or eight attitude control thrusters per interceptor. The largest contributor to the thruster cost is the integrated valve/injector. Integration of the valve and injector into a single body provides the benefits of low d ...

    SBIR Phase II 2011 Department of DefenseMissile Defense Agency
  5. Innovative Photonic Time Delay Units for Radar Applications

    SBC: S2 CORPORATION            Topic: MDA08T012

    We aim to build and demonstrate an innovative photonic true time delay solution which alleviates the fundamental problem of cascaded optical switches, and additionally offers several significant benefits. The device uses wideband spatial-spectral (S2) holographic optical memory materials to store and access several broadband time delay gratings. Broadband optical chirps are used to create these ti ...

    STTR Phase II 2010 Department of DefenseMissile Defense Agency
  6. Fabrication of Advanced Waveguide Structures for Efficient Violet and Near-UV Generation

    SBC: ADVR, Inc            Topic: N/A

    This SBIR Phase I effort will establish the feasibility of fabricating advanced waveguide structures in potassium titanyl phosphate (KTP) capable of efficiently generating 25 to 40 mW of frequency converted light in the 395 to 480 nm. The key innovation in this effort is to utilize KTP waveguides in a single-pass frequency doubling device to efficiently produce the desired laser wavelengths and po ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  7. High Efficiency Up conversion Single-Photon-Detector for 1550 nm Signal

    SBC: ADVR, Inc            Topic: N/A

    This NIST Phase II SBIR effort will two low noise single photon detectors using MgO doped LiNbO3 (LN) periodically poled waveguides and a 980nm (or similar appropriate wavelength) pump to up convert 1550nm photons to 600nm to allow for detection by photomultiplier tube (PMT). The key innovation is using low noise periodically poled waveguides with a long wavelength (1800nm) pump leading to higher ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  8. Innovative Photonic Time Delay Units for Radar Applications

    SBC: S2 CORPORATION            Topic: MDA08T012

    We aim to design and demonstrate an innovative photonic true time delay solution which alleviates the fundamental problem of cascaded optical switches, and additionally offers several significant benefits. The device uses wideband spatial-spectral (S2) holographic optical memory materials to store and access several broadband time delay gratings. Broadband optical chirps are used to create these ...

    STTR Phase I 2009 Department of DefenseMissile Defense Agency
  9. High Efficiency Single Photon Up-Conversion in Waveguides and Pump Wavelength Longer than the Signal Wavelength

    SBC: ADVR, Inc            Topic: N/A

    This NIST Phase 1 SBIR effort will demonstrate the feasibility of low noise single photon up conversion using KTiOPO4 (KTP) or LiNbO3 (LN) or Stoichiometric LiTaO3 (SLT) periodically poled waveguides and an 1800nm pump for a high efficiency single photon detector. The key innovation is using low noise periodically poled waveguides with a long wavelength (1800nm) pump leading to higher efficiency s ...

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  10. Low-Cost Integrated Valve/Injectors for Bipropellant Thrusters

    SBC: BLAINE WRIGHT, INC.            Topic: MDA05067

    The most significant hardware costs on a missile interceptor propulsion system are associated with the thrusters, for which there are typically four divert thrusters and four, six, or eight attitude control thrusters per interceptor. The largest contributor to the thruster cost is the integrated valve/injector. Integration of the valve and injector into a single body provides the benefits of low d ...

    SBIR Phase II 2007 Department of DefenseMissile Defense Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government