You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Low-Cost Integrated Valve/Injectors for Bipropellant Thrusters

    SBC: BLAINE WRIGHT, INC.            Topic: MDA05067

    The most significant hardware costs on a missile interceptor propulsion system are associated with the thrusters, for which there are typically four divert thrusters and four, six, or eight attitude control thrusters per interceptor. The largest contributor to the thruster cost is the integrated valve/injector. Integration of the valve and injector into a single body provides the benefits of low d ...

    SBIR Phase II 2011 Department of DefenseMissile Defense Agency
  2. Data Driven Prognostics (Hybrid Nano-scale/Microscale Composites for Deep Thermal Cycle Damage Resistance)

    SBC: Firehole Technologies, Inc.            Topic: N/A

    Programs such as Airborne Laser and Space-Based Laser require highly mass efficient structures. Because of their high specific strength and stiffness this naturally leads to graphite fiber reinforced polymer (GFRP) materials for many system components. In fluid storage tank applications GFRP laminates often develop microcracking when subject to cryogenic temperatures and/or stresses due to press ...

    STTR Phase I 2004 Department of DefenseMissile Defense Agency
  3. Data Driven Prognostics (Hybrid Nano-scale/Microscale Composites for Deep Thermal Cycle Damage Resistance)

    SBC: Firehole Technologies, Inc.            Topic: MDA03T001

    Programs such as Airborne Laser and Space-Based Laser require highly mass efficient structures. Because of their high specific strength and stiffness this naturally leads to graphite fiber reinforced polymer (GFRP) materials for many system components. In fluid storage tank applications GFRP laminates often develop microcracking when subject to cryogenic temperatures and/or stresses due to press ...

    STTR Phase II 2004 Department of DefenseMissile Defense Agency
  4. Multi-band Range and Doppler Processing Using S2-CHIP Technology

    SBC: SCIENTIFIC MATERIALS CORP.            Topic: MDA04040

    The scope of this proposed effort is to design and demonstrate a multi-band (S and X), wide instantaneous bandwidth (>1 GHz S-band and >2 GHz at X-band) range processor utilizing S2-CHIP technology. S2-CHIP, termed for spatial spectral coherent holographic integrating processor, is an analog optical signal processor that has the ability to process coherent multi-band, ultra-wide-bandwidth radar r ...

    SBIR Phase I 2004 Department of DefenseMissile Defense Agency
  5. Active frequency stabilized laser systems for high performance defense applications

    SBC: SCIENTIFIC MATERIALS CORP.            Topic: MDA04020

    This proposed Phase I project is aimed at developing a turn-key highly-coherent laser system for commercial and high-performance military applications. The core technology of the proposed system is based on regenerative spectral hole burning (RSHB) materials. RSHB materials currently provide the narrowest optical resonance recorded in a solid state material. The ultra-narrow resonant structure ...

    SBIR Phase I 2004 Department of DefenseMissile Defense Agency
  6. Liquid Melt Focused Beam Spray Process

    SBC: RESODYN CORPORATION            Topic: N/A

    The innovation presented in this proposal involves the use of a liquid melt thermal spray process for cost effective rapid prototyping of near-net shape tooling for the lay up of advanced composite materials. The process uses a focused beam of charged liquid droplets to form tooling directly from three-dimensional computer generated drawings eliminating traditional steps associated with fabricatio ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government