You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. High-Power Vertical-Junction Field-Effect Transistors Fabricated on Low-Dislocation-Density GaN by Epitaxial Lift-Off [Phase IIS]

    SBC: MICROLINK DEVICES INC            Topic: 1

    In this program, we will develop a breakthrough technology that will enable wafer-scale epitaxial lift-off (ELO) of GaN power device heterostructures from low-dislocation-density bulk GaN substrates. This technology will be used to provide a low-cost vertical junction field effect transistors (VJFETs) with high breakdown voltage (greater than 1,200 V) and high current capability (greater than 100 ...

    SBIR Phase II 2014 Department of EnergyARPA-E
  2. Portable SPR Imaging Biosensor for Pathogen Detection

    SBC: RESODYN CORPORATION            Topic: DHP13005

    Many of the currently available options for food safety testing are expensive, slow, or limited in the range of threats that can be detected. Sending samples back to testing facilities in the United States is too slow and cumbersome to effectively respond to immediate food safety issues. SPR technology has been well-developed as a tool for molecular analysis, so it is relatively mature in terms ...

    SBIR Phase I 2014 Department of DefenseDefense Health Agency
  3. A Universal Device for Performing Cricothyrotomies

    SBC: WOLF TECHNICAL SERVICES INC            Topic: DHP13015

    The purpose of this multi-phase program is to develop an innovative all-in-one surgical instrument for performing cricothyrotomies and managing airway trauma on the battlefield, with improvements aimed at ultimately reducing mortality rates associated with these procedures. The Wolf QuickCric is designed to be a substantial improvement over the cricothyrotomy kits that are currently used by medic ...

    SBIR Phase I 2014 Department of DefenseDefense Health Agency
  4. An Object oriented parallel programming system with adaptive runtime

    SBC: CHARMWORKS, INC.            Topic: 02c

    High Performance Computing technology has advanced significantly, and advanced parallel computers are being built, with DOE leadership. Yet, the American engineering and manufacturing industry has not started leveraging parallel computing at a significant level, partly because of the challenging nature of modern simulation software. US competitiveness in manufacturing may suffer due to its ineffe ...

    SBIR Phase I 2014 Department of Energy
  5. Diamond membrane-based X-ray optics: Fresnel zone plates, beam stops, and grids

    SBC: Advanced Diamond TechNologies, Inc.            Topic: 04a

    The continuous push towards higher photon energies and higher imaging resolution has brought current state- of-theart X-ray focusing zone plates to a limit of 20 nm resolution at & lt;10 keV photon energies. Zone plates for focusing with same or better resolution at energies up to 25 keV are necessary for imaging and elemental analyses of multi-element samples, such as nano-composites, biological ...

    SBIR Phase I 2014 Department of Energy
  6. Selective Catalysis for One-Step LigNocellulose Delignification and Lignin Valorization to High Value MethoxypheNols

    SBC: Spero Energy, Inc.            Topic: 12a

    The U.S.s global leadership position in the manufacture of high value chemicals (HVCs) relies on its ability to produce and utilize simple and useful organic (SUO) building block chemicals, a $400 billion a year enterprise based on nonrenewable petroleum feedstock. To maintain U.S.s leadership position in the 21st century, we must seek alternate renewable and economically competitive sources for m ...

    SBIR Phase I 2014 Department of Energy
  7. Lidar-based high resolution 3D imager and remote gas sensor: a new paradigm for terrestrial environmental monitoring

    SBC: Bridger Photonics, Inc.            Topic: 18e

    Predictive modeling and understanding of the response and resilience of the terrestrial environment to both climate change and human intervention is critical for sustainable management of natural resources. However, measurement and modeling of terrestrial environments is challenging due to the complexity and multitude of interactions occurring among plants, microbes, minerals, migrating fluids, a ...

    SBIR Phase I 2014 Department of Energy
  8. Real-time, continuous and quantitative detection of bioavailable radionuclides and heavy metals in contaminated water at DOE sites

    SBC: ANDALYZE, INC.            Topic: 20b

    Quantitative, real-time detection of hazardous metal ions on-site is an important goal and remains a significant challenge while monitoring sources such as potable, ground, surface and industrial waters. Quantitative analysis of trace elements is predominantly done by sending the samples to a laboratory for testing by sophisticated analytical techniques, such as Inductively Coupled Plasma Spectrom ...

    SBIR Phase I 2014 Department of Energy
  9. Development of Large-Aperture Periodically Poled Magnesium Oxide-doped Lithium Niobate

    SBC: ADVR, INC.            Topic: 32g

    Optical parametric chirped pulse amplification (OPCPA) with periodically-poled nonlinear crystals is a key technology in the development of accelerator laser systems because such systems enable broadband amplification of high-energy laser pulses over a wide range of different pulse wavelengths. To avoid optical damage and the occurrence of unwanted nonlinear optical processes in the nonlinear crys ...

    SBIR Phase I 2014 Department of Energy
  10. Design and fabrication of a 30T superconducting soleNoid using hyperbaric processed Bi2212 round wire

    SBC: MUONS INC            Topic: 33b

    High field magnets are needed for frontier accelerator facilities and have many applications beyond high-energy physics. Of particular interest are 30-40T class (LTS/HTS hybrid) solenoids required for the final beam cooling stages of a muon collider facility. The successful design of such magnets using Bi2212 conductor depends critically on the conductor processing, stress management in the coil, ...

    SBIR Phase I 2014 Department of Energy
US Flag An Official Website of the United States Government