Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Deployable Micro Weather Sensor

    SBC: Anasphere, Inc            Topic: N04145

    Real-time meteorological data is becoming ever more critical to military operations. Such data should be available from as many locations around a theater of operation as possible. To that end, there is a need for compact weather sensors that can be quickly deployed by a wide variety of methods, ranging from high-performance aircraft to infantry soldiers. The resulting local weather data will b ...

    SBIR Phase I 2004 Department of DefenseNavy
  2. High-Temperature Amorphous Coating for CMCs for Protection against Hot Corrosion

    SBC: APPLIED THIN FILMS, INC.            Topic: N04250

    Ceramic matrix composites (CMCs) are being targeted for many military and commercial applications due to their light weight and high temperature stability. Their deployment is hampered by limited environmental durability. The Navy, under the JSF program, is evaluating a high performance CMC for an exhaust nozzle component. The CMC suffers from environmental degradation, primarily due to hot cor ...

    SBIR Phase I 2004 Department of DefenseNavy
  3. Cost-Effective Production of Piezoelectric Single Crystals

    SBC: H. C. Materials Corporation            Topic: SB031005

    : The development of cost-effective manufacturing technique for PMN-PT based piezoelectric single crystals with enhanced capabilities is critical to the achievement of the new generation of acoustic transduction devices. In Phase I, feasibility of the novel technique was demonstrated. The objective of this research project is to continue development of reducing the manufacturing costs for large-si ...

    SBIR Phase II 2004 Department of DefenseNavy
  4. Low Drag Multi-Frequency Radome

    SBC: LINDSEY ASSOC.            Topic: N03104

    In this effort a high temperature inorganic polymer binder will be combined with quartz fabric layers to construct radomes that will be transparent at millimeter wavelengths and act as an electrical conductor at low frequencies. Electrical performance and environmental performance will be demonstrated during this effort with the use of test coupons and full sized radomes. Lindsey Associates freq ...

    SBIR Phase II 2004 Department of DefenseNavy
  5. Rugged, Low-Cost, Nondielectric Missile Radome

    SBC: LINDSEY ASSOC.            Topic: N04242

    The objective is to develop the design and manufacturing procedures for a rugged low cost non-dielectric missile radome that can be manufactured using simple material and process techniques. The focus will be on an electrically thick metal radome with array of holes or slots that are filled with dielectric plugs. Coverings will be designed for impedance matching and thermal considerations. The ...

    SBIR Phase I 2004 Department of DefenseNavy
  6. Fiber optic power meter with optical detector in a detachable probe.

    SBC: RESODYN CORPORATION            Topic: N04047

    The US Navy has an immediate and compelling need for a handheld, battery powered, fiber optic power meter with a remote optical detector. Existing handheld meters have the optical detector mounted on the main unit. Such meters often do not fit in the tight spaces found in ships, planes, and other vehicles. A novel fiber optic power meter design with a remote optical detector probe is proposed for ...

    SBIR Phase I 2004 Department of DefenseNavy
  7. Development of Quantum Cascade Laser Heterostructures for Mid-Infrared (4-5 Micron) Atmospheric Transmission

    SBC: MP Technologies, LLC            Topic: N03107

    This proposal is aimed at further improving the design of quantum cascade lasers for ambient temperature free-space communication in the mid-infrared (4< lambda

    SBIR Phase II 2004 Department of DefenseNavy
  8. Low Cost High Strength High Toughness Corrosion Resistant Materials for Marine Corps Advanced Amphibious Assault Vehicle (AAAV)

    SBC: QUESTEK INNOVATIONS LLC            Topic: N03167

    QuesTek Innovations LLC proposes to demonstrate the feasibility for the rapid development of a low-cost, nanostructured high-strength, high-toughness stainless steel for components of the Marine Corps Advanced Amphibious Assault Vehicle (AAAV), which experience severe corrosive and abrasive environments, including seawater and sand. To perform successfully, the material from which these structural ...

    SBIR Phase I 2004 Department of DefenseNavy
  9. Adaptive, Intelligent Acoustic Recognition/Alert Systems for Security Breaching Noise Detection, Close Proximity Danger Identification, and Perimeter

    SBC: Safety Dynamics            Topic: N04115

    The major features of our proposed system are: (a) multi-node acoustic detection of sounds specifically associated with security breaching noises, (b) resistance to high background noise, including multiple classes of backgroun noise, (c) adaptation to light weight and rugged mobile devices, and (d) testing of discrimination, robustness, and ruggedness under environmentally harsh conditions

    SBIR Phase I 2004 Department of DefenseNavy
  10. Electro-Magnetic Disruption of the RPG Shaped Charge Jet

    SBC: HY-TEK MANUFACTURING CO., INC.            Topic: N04902

    HMC's objective is to conduct an accelerated 3 month research and development effort to investigate the feasibility of applying the Lorentz Force to the creation of an electromagnetic armor system that will provide both heavy and light armored military vehicles as well as fixed armaments with an effective defense against multiple, and otherwise lethal RPG attacks.

    SBIR Phase I 2004 Department of DefenseNavy
US Flag An Official Website of the United States Government